Network Isolation Transformer HIT-100 Outline RoHS compliance Operating temperature ・Humidity 10~40℃ 30~85%(No dew condensation) Storage temperature ・Humidity -20~65℃ 10~95%(No dew condensation) 100BASE-TX compatible US Patent No. 6974905 IEC60601-1 Recognized Application Network separation device HIT-100 (Hyper Isolation Transformer) , in a network environment, such as medical facilities, is a high-performance isolation transformer in order to prevent electric shocks to the operator and patients that are connected to the electronic medical equipment. This product (adapted separator safety General Rules IEC60601-1-1 medical electrical equipment) interrupts the electric current by the potential difference to occur between a leak electric current and the grounds from other electric apparatuses by separating the transmission signal with a medical service electric apparatus and other electric apparatuses electrically. In addition, it is possible to reduce the common mode noise generated in the LAN cable, and this noise can prevent malfunction or failure of the electrical equipment by the cause. Used Equipment : PC、HUB、Ruter and communication equipment Dimensions (Unit : mm) Note: This specification is subject to change without notice. Please contact your nearest sales office for updated information when placing an order. Page 1 of 2 Ver.1.0 ( March 2015) www.sumida.com Network Isolation Transformer HIT-100 Electric characteristic Impedance 100Ω:100Ω(RJ-45) Input Voltage 3V rms MAX Frequency Response 100kHz - 100MHz( Max 1dB) Return Loss 1MHz - 100MHz(Min. 20dB) Dielectric Strength In-Out AC 4kV(1Minut) In-Out Capacitance Max. 40pF Creepage Distance Min. 8mm Clearance Min. 5mm Example For sales office information, please click here to visit our website. Note: This specification is subject to change without notice. Please contact your nearest sales office for updated information when placing an order. Page 2 of 2 Ver.1.0 ( March 2015) www.sumida.com