Alcoa Fastening Systems & Rings THIS DRAWING, THE STRUCTURAL DESIGN DISCLOSED THEREIN AND THE TECHNICAL DATA AND ENGINEERING SERVICE REPRESENTED THEREBY ARE THE EXCLUSIVE PROPERTY OF HUCK INTERNATIONAL, INC. L Ti-Matic ® CURRENT DESIGN ACTIVITY CAGE CODE 0HDW7 AFSR TUCSON OPERATIONS 3724 EAST COLUMBIA STREET TUCSON, ARIZONA 85714 PHONE (520) 519-7400 FAX (520) 519-7454 C B ENGINEERING STANDARD M SLEEVE L 4 A 5 D 3 8 PIN 4 GRIP S .030 MIN E R 9 MANUFACTURER'S IDENTIFICATION MATERIAL IDENTIFICATION GRIP IDENTIFICATION 6 7 INSTALLED FASTENER PART NUMBER NOM DIA ØA HEAD B HEAD HEIGHT TABLE I C MIN ØD ±.001 E MAX R RAD MAX (S) DESIGN REF ONLY 9 SBP-EV05-( ) 05 SBP-EV06-( ) 06 SBP-EV08-( ) 08 .272 .250 .332 .305 .432 .400 .070 .058 .135 .120 .140 .120 SINGLE SHEAR STRENGTH LBS 1 TENSILE STRENGTH LBS HOLE SIZE +.003 -.000 1 2 .844 .163 .215 .010 .232 1980 1150 .164 .875 .198 .250 .015 .292 2925 1690 .199 1.000 .259 .305 .020 .361 5005 2900 .260 1. MINIMUM ULTIMATE SINGLE SHEAR AND TENSILE STRENGTHS, IN POUNDS, OF INSTALLED FASTENER. 2. APPLIES TO GRIPS 05-03 MAX, 06-03 MAX, AND 08-04 MAX AND GREATER. IN SHORTER GRIPS, A TRUE COMPOSITE SHEAR TEST CANNOT BE PERFORMED. 3. TRIM FLASH NOT TO EXCEED .005 MAXIMUM LENGTH ABOVE HEAD OF PIN. 4. SOLID OR SPLIT LOCK COLLAR AT MANUFACTURER'S OPTION. SPLIT NOT TO EXCEED .020 WIDTH. SINGLE ACTION FASTENERS HAVE A SHEAR CAP TO FACILITATE INSTALLATION. THE SHEAR CAP IS NOT PART OF THE INSTALLED FASTENER. 5. KNURLED TO RETAIN FASTENER ASSEMBLY. NOT PART OF INSTALLED FASTENER. L ISSUED PER DCN 12948, CHANGED FROM Alcoa Fastening Systems TO Alcoa Fastening Systems & Rings AND AFS TO AFSR 3/17/1995 REVISED 4/7/2015 PAGE 1 OF 3 ® Ti-Matic BLIND BOLT FASTENER, HIGH STRENGTH, PULL-TYPE, POSITIVE MECHANICAL LOCK, PROTRUDING HEAD, TITANIUM/A-286, SINGLE ACTION INSTALLATION (95 KSI SHEAR) DIMENSIONS IN INCHES PROCUREMENT SPEC T0102 DRAWN BY CHECKED BY J. SCHLOBOHM SIGNATURE ON FILE SBP-EV SK12641 This dra win g/docu mentatio n is control led b y either the De pa rtme nt of Sta te, Intern ationa l Tra ffic In Arms R egu la tio ns or the De partmen t of C ommerce , Expo rt Admi nistratio n Reg ula ti ons an d may Req uire a n expo rt li cense /l icen se excep ti on pri or to b ein g tra nsferred to a forei gn na ti ona l, i nsid e or ou tsid e of th e United Sta te s. EAR/ECCN EAR 99. Th ese co mm oditie s, techn olo gy or software we re expo rte d fro m the U nited States in a ccorda nce wi th the Exp ort Ad mini stra ti on Re gul ation s. Dive rsion co ntrary to U.S. la w proh ibited . Alcoa Fastening Systems & Rings THIS DRAWING, THE STRUCTURAL DESIGN DISCLOSED THEREIN AND THE TECHNICAL DATA AND ENGINEERING SERVICE REPRESENTED THEREBY ARE THE EXCLUSIVE PROPERTY OF HUCK INTERNATIONAL, INC. L CURRENT DESIGN ACTIVITY CAGE CODE 0HDW7 AFSR TUCSON OPERATIONS 3724 EAST COLUMBIA STREET TUCSON, ARIZONA 85714 PHONE (520) 519-7400 FAX (520) 519-7454 Ti-Matic ® ENGINEERING STANDARD 6. BLIND SIDE HEAD MAY BE INSTALLED ON 5 MAXIMUM SLOPE. 7. IDENTIFICATION: HUCK SYMBOL, "EV" AND GRIP DASH NUMBER. 8. DIAMETER OF PIN HEAD SHALL NOT EXCEED "D" MAX AND MAY BE .002 BELOW "D" MIN. 9. SLEEVE DIAMETER "D" MAY BE .002 UNDERSIZE IN THIS AREA. TABLE I I GRIP NUMBER TABULATION GRIP DESIGN OVERLAP DASH GRIP RANGE GRIP NO. MAX MIN. MAX. -05 DIA (L) M MAX -06 DIA -08 DIA (L) M MAX (L) M MAX -01 .031 .095 .110 .237 .372 -02 .094 .157 .171 .300 .434 .323 .479 .364 .553 -03 .156 .220 .235 .362 .496 .385 .541 .426 .616 -04 .219 .282 .298 .425 .559 .448 .604 .489 .678 -05 .281 .345 .361 .487 .622 .510 .666 .551 .740 -06 .344 .407 .422 .550 .684 .573 .729 .614 .803 -07 .406 .470 .486 .612 .746 .635 .791 .676 .866 -08 .469 .532 .548 .675 .809 .698 .854 .739 .928 -09 .531 .595 .611 .737 .872 .760 .916 .801 .990 -10 .594 .657 .673 .800 .934 .823 .979 .864 1.053 -11 .656 .720 .736 .862 .996 .885 1.041 .926 1.116 -12 .719 .782 .798 .948 1.104 .989 1.178 -13 .781 .845 .861 1.010 1.166 1.051 1.240 -14 .844 .907 .923 1.073 1.229 1.114 1.303 -15 .906 .970 .986 1.176 1.366 -16 .969 1.032 1.048 1.239 1.428 DIMENSIONS IN INCHES L ISSUED PER DCN 12948, CHANGED FROM Alcoa Fastening Systems TO Alcoa Fastening Systems & Rings AND AFS TO AFSR 3/17/1995 REVISED 4/7/2015 PAGE 2 OF 3 ® Ti-Matic BLIND BOLT FASTENER, HIGH STRENGTH, PULL-TYPE, POSITIVE MECHANICAL LOCK, PROTRUDING HEAD, TITANIUM/A-286, SINGLE ACTION INSTALLATION (95 KSI SHEAR) PROCUREMENT SPEC T0102 DRAWN BY CHECKED BY J. SCHLOBOHM SIGNATURE ON FILE SBP-EV SK12641 This dra win g/docu mentatio n is control led b y either the De pa rtme nt of Sta te, Intern ationa l Tra ffic In Arms R egu la tio ns or the De partmen t of C ommerce , Expo rt Admi nistratio n Reg ula ti ons an d may Req uire a n expo rt li cense /l icen se excep ti on pri or to b ein g tra nsferred to a forei gn na ti ona l, i nsid e or ou tsid e of th e United Sta te s. EAR/ECCN EAR 99. Th ese co mm oditie s, techn olo gy or software we re expo rte d fro m the U nited States in a ccorda nce wi th the Exp ort Ad mini stra ti on Re gul ation s. Dive rsion co ntrary to U.S. la w proh ibited . Alcoa Fastening Systems & Rings THIS DRAWING, THE STRUCTURAL DESIGN DISCLOSED THEREIN AND THE TECHNICAL DATA AND ENGINEERING SERVICE REPRESENTED THEREBY ARE THE EXCLUSIVE PROPERTY OF HUCK INTERNATIONAL, INC. L CURRENT DESIGN ACTIVITY CAGE CODE 0HDW7 AFSR TUCSON OPERATIONS 3724 EAST COLUMBIA STREET TUCSON, ARIZONA 85714 PHONE (520) 519-7400 FAX (520) 519-7454 Ti-Matic ® ENGINEERING STANDARD TABLE I I I FINISH CODE COMPONENT DESCRIPTION MATERIAL SLEEVE A-286 PER CHEMISTRY OF SAEAMS5737 PIN 38-6-44 TITANIUM PER CHEMISTRY OF SAE-AMS4957 OR SAE-AMS-T-9047 NONE LOCK COLLAR 10 SLEEVE PIN FINISH LUBE 10 PASSIVATE PER SAE-AMS2700 NONE OR CETYL ALCOHOL TYPE 2 OR TYPE 8 PER SAE-AS87132 OR DRY FILM LUBE PER SAENONE AS5272 TYPE 1 A-286 PER CHEMISTRY OF SAEAMS5737 OR TYPE 316 CRES PER CHEMISTRY OF SAE-AMS5690 PASSIVATE PER SAE-AMS2700 DICRONITE DL-5 LUBE PER TYPE 2 OR TYPE 8 DOD-L-85645 A-286 PER CHEMISTRY OF SAEAMS5737 38-6-44 TITANIUM PER CHEMISTRY OF SAE-AMS4957 OR SAE-AMS-T-9047 ALUMINUM COAT PER NAS4006 NONE OR CETYL ALCOHOL PER SAE-AS87132 OR DRY NONE FILM LUBE PER SAEAS5272 TYPE 1 A-286 PER CHEMISTRY OF SAEAMS5737 OR TYPE 316 CRES PER CHEMISTRY OF SAE-AMS5690 PASSIVATE PER SAE-AMS2700 DICRONITE DL-5 LUBE PER TYPE 2 OR TYPE 8 DOD-L-85645 AC LOCK COLLAR 10 10. LUBE AND LOCK COLLAR MATERIAL AT MANUFACTURER'S OPTION. PART NUMBER SBP-EV06 -06 (*) NO SUFFIX DENOTES NO PROTECTIVE FINISH. AC - DENOTES ALUMINUM COATING PER NAS4006. GRIP NUMBER IN 1/16" NOMINAL SHANK DIAMETER IN 32nd INCHES. MATERIAL DESIGNATOR - A-286 CRES SLEEVE/TITANIUM PIN. Ti-Matic R BLIND BOLT FASTENER, HIGH STRENGTH PULL-TYPE, POSITIVE MECHANICAL LOCK, PROTRUDING HEAD. DESIGNATES: SINGLE ACTION INSTALLATION. DIMENSIONS IN INCHES L ISSUED PER DCN 12948, CHANGED FROM Alcoa Fastening Systems TO Alcoa Fastening Systems & Rings AND AFS TO AFSR 3/17/1995 REVISED 4/7/2015 PAGE 3 OF 3 ® Ti-Matic BLIND BOLT FASTENER, HIGH STRENGTH, PULL-TYPE, POSITIVE MECHANICAL LOCK, PROTRUDING HEAD, TITANIUM/A-286, SINGLE ACTION INSTALLATION (95 KSI SHEAR) PROCUREMENT SPEC T0102 DRAWN BY CHECKED BY J. SCHLOBOHM SIGNATURE ON FILE SBP-EV SK12641 This dra win g/docu mentatio n is control led b y either the De pa rtme nt of Sta te, Intern ationa l Tra ffic In Arms R egu la tio ns or the De partmen t of C ommerce , Expo rt Admi nistratio n Reg ula ti ons an d may Req uire a n expo rt li cense /l icen se excep ti on pri or to b ein g tra nsferred to a forei gn na ti ona l, i nsid e or ou tsid e of th e United Sta te s. EAR/ECCN EAR 99. Th ese co mm oditie s, techn olo gy or software we re expo rte d fro m the U nited States in a ccorda nce wi th the Exp ort Ad mini stra ti on Re gul ation s. Dive rsion co ntrary to U.S. la w proh ibited .