SAW Bandpass Filter 204468B Features z IF bandpass filter z High attenuation z 50 ohms single-ended operation z SMD Package 13.3mm × 6.5mm × 1.6mm Package Dimension 13.30±0.2 9 8 7.62±0.1 7 7 11 11 2 3 5 5 4 12 2.54±0.1 1 10 9 1.50±0.1 204468B 12 8 6 6 ITF 02D073A 1.61±0.2 6.50±0.2 10 4 3 2 2.54±0.1 1 0.80±0.1 Package S1365 Pin Configuration Dimensions shown are nominal in millimeters 11 Input Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating 5 Output 6, 12 Ground 1, 2, 3, 4, 7, 8, 9, 10 Case ground Maximum Ratings Parameter Unit Minimum Typical Maximum Operation Temperature Range °C -10 25 60 Storage Temperature Range °C -40 - 85 Electrostatics Sensitive Device (ESD) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. 204468B Rev. Date 2003-09-02 Rev. NR3011-AS03 1/7 SAW Bandpass Filter 204468B Electrical Specification Fc = 160.0MHz Terminating source impedance : 50Ω and matching network Terminating load impedance : 50Ω and matching network Minimum Typical Maximum MHz 159.920 160.0 160.080 dB - 4.0 5.5 3dB Bandwidth MHz 0.085 0.095 - 40dB Bandwidth MHz - 0.350 0.400 Absolute Group Delay at Fc usec - 10.5 - Group Delay Variation at 3dB usec - 5.0 - Relative Attenuation ~ Fo - 0.5 MHz … Fo + 0.5 MHz ~ dB 50 55 - Temperature Coefficient of Frequency ppm/°C2 - -0.03 - Center Frequency at room temp. Insertion Loss Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) All attenuation measurements are measured relative to insertion loss I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. 204468B Rev. Date 2003-09-02 Rev. NR3011-AS03 2/7 SAW Bandpass Filter 204468B Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω L1 L2 C1 Output 50Ω C2 L1, L2 = 220 nH C1, C2 = 1.0 pF Marking Configuration ITF1) 02D0732) A3) 204468B4) 1) Manufacturer name 2) Lot Number 3) Group Name ( **refer to the next page ) 4) Part Number I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. 204468B Rev. Date 2003-09-02 Rev. NR3011-AS03 3/7 SAW Bandpass Filter 204468B Marking Example Center Frequency Range ( MHz) at room temp. Marking 159.920 ~ 159.929 ITF 02D073F 204468B 159.930 ~ 159.939 ITF 02D073G 159.940 ~ 159.949 ITF 02D073H 159.950 ~ 159.959 ITF 02D073I 159.960 ~ 159.969 ITF 02D073J 204468B 204468B 204468B 204468B 159.970 ~ 159.979 ITF 02D073K 204468B 159.980 ~ 159.989 ITF 02D073L 204468B 159.990 ~ 159.999 ITF 02D073M 204468B 160.000 ~ 160.009 ITF 02D073N 204468B 160.010 ~ 160.019 ITF 02D073O 160.020 ~ 160.029 ITF 02D073P 160.030 ~ 160.039 ITF 02D073Q 160.040 ~ 160.049 ITF 02D073R 204468B 204468B 204468B 204468B 160.050 ~ 160.059 ITF 02D073S 204468B 160.060 ~ 160.069 ITF 02D073T 204468B 160.070 ~ 160.079 ITF 02D073U 204468B I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. 204468B Rev. Date 2003-09-02 Rev. NR3011-AS03 4/7 SAW Bandpass Filter 204468B Typical Performance (at +25℃) 4 Aug 2003 12:04:58 CH1 S 21 log MAG 10 dB/ REF 0 dB PRm Cor CH1 CENTER 160.000 000 MHz CH1 CH2 S 21 S 21 log MAG delay SPAN 1 dB/ 3.047 us/ REF 0 dB REF 0 s 2.500 000 MHz 4 Aug 2003 12:22:20 1_ 0 dB 1_: 8.5235 us 0.000 000 MHz PRm Max BW: Cor REF=1 .098 938 MHz cent: 159.991164 MHz Q: 1617.1 1_ loss: -4.4966 dB 1 2 159.990 000 MHz PRm 1 Cor 3 4 Smo 2 1 CENTER 160.000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 SPAN .200 000 MHz Part No. 204468B Rev. Date 2003-09-02 Rev. NR3011-AS03 5/7 SAW Bandpass Filter 204468B Packing Specification 1. Reeling Quantity : 2000 pcs / reel 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Direction of pull Top cover tape 3. Top cover tape adhesion 0~15 degree 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Carrier tape Part No. 204468B Rev. Date 2003-09-02 Rev. NR3011-AS03 6/7 SAW Bandpass Filter 204468B Carrier Tape Dimensions [unit : mm] A 7.00 ± 0.1 B 13.80 ± 0.1 C 13.25 ± 0.1 D 1.95 ± 0.1 E 24.00 ± 0.1 F 12.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] G = 2G = 24.4 mm I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. 204468B Rev. Date 2003-09-02 Rev. NR3011-AS03 7/7