SAW Bandpass Filter F4651 Features z RF bandpass filter for CDMA450 A-Band Rx. Part z Usable bandwidth 5MHz (462.5 MHz ~ 467.5 MHz) z High attenuation z No matching 50Ω single-ended operation z Ceramic Surface Mounted Device Package ( 3.8 mm × 3.8 mm ) z RoHS Compliant 3.80±0.15 3 6 1 5 5 2 4 4 3 1.27±0.1 2 ITF 4651 5A1 1.90±0.1 6 1.40±0.15 3.80±0.15 1 1.00±0.1 0.64±0.1 Package Dimensions Dimensions shown are nominal in millimeters Pin Configurations Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating 2 Input 5 Output 1, 3, 4, 6 Case ground Maximum Ratings Parameters Unit Minimum Typical Maximum Operating Temperature Range °C -30 25 85 Storage Temperature Range °C -40 - 85 Power Handling Capability dBm - - 27 Electrostatics Sensitive Device (ESD) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F4651 Rev. Date 2006-06-08 Rev. NR3014-AS05 1/7 SAW Bandpass Filter F4651 Specifications Minimum Typical Maximum Unit Center Frequency ( Fc ) - 465.0 - MHz Insertion Loss (In Fc +/- 2.5 MHz) - 3.0 3.8 dB Amplitude Ripple (In Fc +/- 2.5 MHz) - 1.0 2.2 dB VSWR (In Fc +/- 2.5 MHz) - 1.5 2.4 0.3 MHz ~ 452.5 MHz 45 50 - 452.5 MHz ~ 457.5 MHz 35 43 - 485.0 MHz ~ 507.5 MHz 40 45 - 507.5 MHz ~ 1200 MHz 35 - - 1200 MHz ~ 1700 MHz 25 - - 1700 MHz ~ 2000 MHz 20 - - Temperature Range (Operational) -30 25 85 ℃ 27 dBm Relative Attenuation Input RF Power (In Fc +/- 2.5 MHz) Input/Output Impedance dB 50 Ohms Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F4651 Rev. Date 2006-06-08 Rev. NR3014-AS05 2/7 SAW Bandpass Filter F4651 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration 1) ITF2) 46513) 5A14) 1) Pad Number 1 Index 2) Manufacturer name 3) Marking Number 4) Lot Number * Ink or Laser Marking available I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F4651 Rev. Date 2006-06-08 Rev. NR3014-AS05 3/7 SAW Bandpass Filter F4651 Typical Performance ( at 25℃ ) CH1 S 21 log MAG 16 Dec 2003 20:36:09 5_:-2.0193 dB REF -2.469 dB 10 dB/ 465.000 000 MHz PRm 1_:-50.453 dB 452.5 MHz 5 Cor 2_:-54.766 dB 457.5 MHz 3 4 3_:-2.9722 dB 462.5 MHz 4_:-2.2885 dB 467.5 MHz 1 2 CH1 CENTER 465.000 000 MHz CH2 S 21 log MAG SPAN 100.000 000 MHz 1 dB/ REF -2 dB 16 Dec 2003 20:38:21 2_: .6511 dB 5.000 000 MHz REF=1 mean:-2.259 8 dB s.dev: .2627 dB p-p: 1.0159 dB 2 1 PRm Cor CH2 CENTER 465.000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 SPAN 30.000 000 MHz Part No. F4651 Rev. Date 2006-06-08 Rev. NR3014-AS05 4/7 SAW Bandpass Filter F4651 Input / Output VSWR Charts 17 Sep 2003 11:15:42 CH2 S 11 SWR 500 m / REF 1 17 Sep 2003 11:17:27 CH2 PRm PRm Cor Cor CH2 CENTER 465.000 000 MHz SPAN 20.000 000 MHz S 22 SWR 500 m / REF 1 CH2 CENTER 465.000 000 MHz SPAN 20.000 000 MHz Input / Output Smith Charts CH1 S 11 1 U FS 17 Sep 2003 11:18:05 2.7832 952.6 pH 1_: 55.402 CH1 S 22 1 U FS 17 Sep 2003 11:18:52 5.4688 1.8718 nH 1_: 55.006 465.000 000 MHz 465.000 000 MHz PRm PRm Cor Cor 1 1 CH1 CENTER 465.000 000 MHz SPAN 100.000 000 MHz CH1 CENTER 465.000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 SPAN 100.000 000 MHz Part No. F4651 Rev. Date 2006-06-08 Rev. NR3014-AS05 5/7 SAW Bandpass Filter F4651 Packing Specification 1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Direction of pull Top cover tape 3. Top cover tape adhesion 0~15 degree 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Carrier tape Part No. F4651 Rev. Date 2006-06-08 Rev. NR3014-AS05 6/7 SAW Bandpass Filter F4651 Carrier Tape Dimensions [unit : mm] A 4.30 ± 0.1 B 4.30 ± 0.1 C 7.25 ± 0.1 D 1.70 ± 0.1 E 12.00 ± 0.1 F 8.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F4651 Rev. Date 2006-06-08 Rev. NR3014-AS05 7/7