F4552

SAW Bandpass Filter F4552
Features
z
RF bandpass filter for CDMA450 A-Band Tx. Part
z
Usable bandwidth 5MHz (452.5 MHz ~ 457.5 MHz)
z
High attenuation
z
No matching 50Ω single-ended operation
z
Ceramic Surface Mounted Device Package ( 3.8 mm × 3.8 mm )
z
RoHS compliant
3.80±0.15
3
6
1
5
5
2
4
4
3
1.27±0.1
2
ITF
4552
5A1
1.90±0.1
6
1.40±0.15
3.80±0.15
1
1.00±0.1
0.64±0.1
Package Dimensions
Dimensions shown are nominal in millimeters
Pin Configurations
Body : Al2O3 Ceramic
Lid : Kovar, Ni Plated
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um
Ni Plating
2
Input
5
Output
1, 3, 4, 6
Case ground
Maximum Ratings
Parameters
Unit
Minimum
Typical
Maximum
Operating Temperature Range
°C
-30
25
85
Storage Temperature Range
°C
-40
-
85
Power Handling Capability
dBm
-
-
27
Electrostatics Sensitive Device (ESD)
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F4552
Rev. Date
2006-06-08
Rev.
NR3013-AS04
1/7
SAW Bandpass Filter F4552
Specifications
Minimum
Typical
Maximum
Unit
Center Frequency ( Fc )
-
455.0
-
MHz
Insertion Loss (In Fc +/- 2.5 MHz)
-
2.0
2.8
dB
Amplitude Ripple (In Fc +/- 2.5 MHz)
-
0.8
1.5
dB
VSWR (In Fc +/- 2.5 MHz)
-
1.4
2.0
0.3 MHz ~ 350.0 MHz
25
30
-
350.0 MHz ~ 441.0 MHz
25
30
-
462.5 MHz ~ 467.5 MHz
35
43
-
467.5 MHz ~ 1200 MHz
25
30
-
1200 MHz ~ 2000 MHz
20
-
-
Temperature Range (Operational)
-30
25
85
℃
27
dBm
Relative Attenuation
Input RF Power (In Fc +/- 2.5 MHz)
Input/Output Impedance
dB
50
Ohms
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F4552
Rev. Date
2006-06-08
Rev.
NR3013-AS04
2/7
SAW Bandpass Filter F4552
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input
50Ω
Output
50Ω
Marking Configuration
1)
ITF2)
45523)
5A14)
1) Pad Number 1 Index
2) Manufacturer name
3) Marking Number
4) Lot Number
* Ink or Laser Marking available
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F4552
Rev. Date
2006-06-08
Rev.
NR3013-AS04
3/7
SAW Bandpass Filter F4552
Typical Performance ( at 25℃ )
CH1
S 21
log MAG
18 Sep 2003 10:34:13
1_:-1.2538 dB
REF -1.861 dB
10 dB/
452.500 000 MHz
PRm
2_:-1.9454 dB
457.5 MHz
1
Cor
3_:-43.757 dB
462.5 MHz
2
4_:-52.627 dB
467.5 MHz
3
4
CH1 CENTER 455.000 000 MHz
CH2
S 21
log MAG
SPAN 100.000 000 MHz
1 dB/
18 Sep 2003 10:36:00
2_:-.6639 dB
REF 0 dB
5.000 000 MHz
REF=1
2
1
mean:-1.700 1 dB
s.dev: .1958 dB
p-p: .7252 dB
PRm
Cor
CH2 CENTER 455.000 000 MHz
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
SPAN 30.000 000 MHz
Part No.
F4552
Rev. Date
2006-06-08
Rev.
NR3013-AS04
4/7
SAW Bandpass Filter F4552
Input / Output VSWR Charts
CH2
S 11
SWR
1 /
REF 1
18 Sep 2003 10:38:38
5_: 1.2037
455.000 000 MHz
3
CH2
S 22
SWR
1 /
455.000 000 MHz
3
4
4
1_: 1.2177
452.5 MHz
1_: 1.2279
452.5 MHz
2_: 1.2213
457.5 MHz
2_: 1.3604
457.5 MHz
3_: 27.374
462.5 MHz
3_: 27.622
462.5 MHz
4_: 32.684
467.5 MHz
4_: 29.499
467.5 MHz
PRm
PRm
Cor
Cor
5
CH2 CENTER 455.000 000 MHz
18 Sep 2003 10:38:52
5_: 1.1391
REF 1
5
2 SPAN 30.000 000 MHz
1
2
1
CH2 CENTER 455.000 000 MHz
SPAN 30.000 000 MHz
Input / Output Smith Charts
CH1
S 11
1 U FS
18 Sep 2003 10:37:06
-9.2949
37.633 pF
5_: 48.574
CH1
S 22
1 U FS
18 Sep 2003 10:37:19
-6.7285
51.986 pF
5_: 50.613
455.000 000 MHz
PRm
455.000 000 MHz
PRm
1_: 42.076
-4.5508
452.5 MHz
Cor
1_: 41.814
-5.293
452.5 MHz
Cor
2_: 58.033
7.916
457.5 MHz
2_: 68.082
0.8203
457.5 MHz
3_: 7.207
-99.797
462.5 MHz
3_: 7.5391
-94.848
462.5 MHz
4_: 2.375
-55.975
467.5 MHz
5
4_: 3.2441
-54.301
467.5 MHz
5
2
2
1
1
3
CH1 CENTER 455.000 000 MHz
4
SPAN 100.000 000 MHz
3
CH1 CENTER 455.000 000 MHz
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
4
SPAN 100.000 000 MHz
Part No.
F4552
Rev. Date
2006-06-08
Rev.
NR3013-AS04
5/7
SAW Bandpass Filter F4552
Packing Specification
1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel )
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant
150mm min.
Component
contained
Vacant
150mm min.
Leader part
250mm min.
END
START
Tape Running Direction
2. Tensile strength of carrier tape
4.4N/mm width
Direction of pull
Top cover tape
3. Top cover tape adhesion
0~15 degree
1) pull off angle : 0~15°
2) speed : 300mm/min
3) force : 20~70g
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Carrier tape
Part No.
F4552
Rev. Date
2006-06-08
Rev.
NR3013-AS04
6/7
SAW Bandpass Filter F4552
Carrier Tape Dimensions [unit : mm]
A
4.30 ± 0.1
B
4.30 ± 0.1
C
7.25 ± 0.1
D
1.70 ± 0.1
E
12.00 ± 0.1
F
8.00 ± 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F4552
Rev. Date
2006-06-08
Rev.
NR3013-AS04
7/7