SAW Bandpass Filter F2G12 Features W-CDMA applications Usable bandwidth of 60 MHz No impedance matching require for operation at 50 Ω Ceramic Surface Mounted Device Package ( 3.0 mm * 3.0 mm ) Single-ended Operation RoHS Compliant Package Dimensions 1 6 6 1 1 2 5 5 2 2 6 1 5 5 2 4 4 3 2G12 2G12 3 6 I I 4 4 3 3 Package A Package B Both packages A and B are applicable Dimensions shown are nominal in millimeters Pin Configurations Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating 2 Input 5 Output 1, 3, 4, 6 Case ground Maximum Ratings Parameters Unit Minimum Typical Maximum Operating Temperature Range ℃ -30 25 85 Storage Temperature Range ℃ -40 - 85 Power Handling Capability dBm - - 13 Electrostatics Sensitive Device (ESD) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F2G12 Rev. Date 2014-04-03 Rev. NC6002-AS07 1/8 SAW Bandpass Filter F2G12 Specifications Minimum Typical Maximum Unit Center Frequency ( Fc ) - 2140.0 - MHz Insertion Loss (In Fc +/- 30.0 MHz) - 2.2 3.5 dB Amplitude Ripple (In Fc +/- 30.0 MHz) - 0.8 1.5 dBp-p VSWR (In Fc +/- 30.0 MHz) - 1.8 2.4 Group Delay (In Fc +/- 30.0 MHz) 8.6 15 ns Group Delay Variation (In Fc +/- 30.0 MHz) 4.6 8 ns Relative Attenuation 0.3 MHz ~ 500.0 MHz 21.0 33.0 - 500.0 MHz ~ 1900.0 MHz 20.0 28.0 - 1900.0 MHz ~ 2050.0 MHz 25.0 30.0 - 2215.0 MHz ~ 2300.0 MHz 20.0 32.0 - 2300.0 MHz ~ 3000.0 MHz 25.0 32.0 - -30 25 85 ℃ 13 dBm Temperature Range (Operational) Input RF Power (In Fc +/- 30.0 MHz) Input/Output Impedance dB 50 Ohms Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F2G12 Rev. Date 2014-04-03 Rev. NC6002-AS07 2/8 SAW Bandpass Filter F2G12 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration 1) I2) 2G123) 1) Pad Number 1 Index 2) Manufacturer name 3) Marking Number * Ink or Laser Marking available I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F2G12 Rev. Date 2014-04-03 Rev. NC6002-AS07 3/8 SAW Bandpass Filter F2G12 Typical Performance ( at 25℃ ℃) CH1 S21 LOG 10 dB/ 24 Jan 2007 17:25:36 3:-2 . 3380 dB 2 140. 000 000 MHz REF 0 dB CH1 Markers 1:-2 . 2657 dB 2. 11000 GHz 3 Cor 1 2:-2 . 1877 dB 2. 17000 GHz 2 CENTER2 140. 000 000 MHz CH1 S21 LOG 10 dB/ REF 0 dB SPAN 600. 000 000 MHz 24 Jan 2007 17:20:03 2:-2 . 8994 dB 2 140. 000 000 MHz CH1 Markers Cor 2 1:-40 . 338 dB 1. 95000 GHz 1 START . 010 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 STOP 3 000. 000 000 MHz Part No. F2G12 Rev. Date 2014-04-03 Rev. NC6002-AS07 4/8 SAW Bandpass Filter F2G12 Input / Output VSWR Charts CH1 S11 SWR 1 / 24 Jan 2007 17:25:49 3: 1. 8729 2 140. 000 000 MHz REF 1 CH1 S22 SWR 1 / 24 Jan 2007 17:25:56 3: 1. 7802 2 140. 000 000 MHz REF 1 CH1 Markers 1: 1. 4705 2. 11000 GHz Cor CH1 Markers 1: 1. 3155 2. 11000 GHz Cor 2: 1. 5321 2. 17000 GHz 2: 1. 4638 2. 17000 GHz 3 3 2 1 CENTER2 140. 000 000 MHz SPAN 600. 000 000 MHz 2 1 CENTER2 140. 000 000 MHz SPAN 600. 000 000 MHz Input / Output Smith Charts CH1 S11 1 U FS 3: 42. 834 24 Jan 2007 17:26:12 2. 1309 nH 2 140. 000 000 MHz 28. 652 CH1 S22 1 U FS 3: 45. 746 24 Jan 2007 17:26:22 2. 0506 nH 2 140. 000 000 MHz 27. 572 CH1 Markers 1: 62. 244 17. 822 2. 11000 GHz Cor CH1 Markers 1: 65. 406 3. 1172 2. 11000 GHz Cor 2: 35. 656 11. 145 2. 17000 GHz 2: 34. 150 0. 2832 2. 17000 GHz 3 2 3 1 2 CENTER2 140. 000 000 MHz SPAN 600. 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 CENTER2 140. 000 000 MHz 1 SPAN 600. 000 000 MHz Part No. F2G12 Rev. Date 2014-04-03 Rev. NC6002-AS07 5/8 SAW Bandpass Filter F2G12 Group Delay Variation CH1 S21 DEL 10 ns/ 19 Feb 2008 18:09:05 2: 2. 0132 ns 60. 000 000 MHz REF 0 s CH1 Markers Smo mean: 8. 6876 ns Cor REF=1 s. dev : 1. 3035 ns p-p : 4. 6485 ns 2 1 CENTER2 140 . 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 SPAN 300 . 000 000 MHz Part No. F2G12 Rev. Date 2014-04-03 Rev. NC6002-AS07 6/8 SAW Bandpass Filter F2G12 Packing Specification 1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Direction of pull Top cover tape 3. Top cover tape adhesion 0~15 degree 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Carrier tape Part No. F2G12 Rev. Date 2014-04-03 Rev. NC6002-AS07 7/8 SAW Bandpass Filter F2G12 Carrier Tape Dimensions [unit : mm] A 3.40 ± 0.1 B 3.40 ± 0.1 C 7.25 ± 0.1 D 1.70 ± 0.1 E 12.00 ± 0.1 F 8.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F2G12 Rev. Date 2014-04-03 Rev. NC6002-AS07 8/8