BYM10-xxx, GL41x Datasheet

BYM10-xxx, GL41x
www.vishay.com
Vishay General Semiconductor
Surface Mount Glass Passivated Junction Rectifier
FEATURES
• Superectifier structure for high reliability condition
• Ideal for automated placement
SUPERECTIFIER
®
• Low forward voltage drop
• Low leakage current
• High forward surge capability
• Meets MSL level 1, per J-STD-020, LF maximum peak of
250 °C
• AEC-Q101 qualified
DO-213AB
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in general purpose rectification of power supplies,
inverters, converters and freewheeling diodes for consumer,
automotive and telecommunication.
PRIMARY CHARACTERISTICS
IF(AV)
1.0 A
VRRM (BYM10-xxx, GL41x)
50 V to 1000 V, 50 V to 1600 V
IFSM
30 A
IR
10 μA
EAS
5 mJ
VF
1.1 V, 1.2 V
TJ max.
175 °C
Package
DO-213AB
Diode variations
Single die
MECHANICAL DATA
Case: DO-213AB, molded epoxy over glass body
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: Two bands indicate cathode end - 1st band
denotes device type and 2nd band denotes repetitive peak
reverse voltage rating
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
STANDARD RECOVERY
DEVICE: 1ST BAND IS WHITE
SYMBOL
Polarity color bands (2nd band)
BYM
10-50
BYM
10-100
BYM
10-200
BYM
10-400
BYM
10-600
BYM
10-800
BYM
10-1000
GL41A
GL41B
GL41D
GL41G
GL41J
GL41K
GL41M
GL41T
GL41Y
Gray
Red
Orange
Yellow
Green
Blue
Violet
White
Brown
100
200
400
600
800
1000
1300
1600
UNIT
Max. repetitive peak
reverse voltage
VRRM
50
Max. RMS voltage
VRMS
35
70
140
280
420
560
700
910
1120
V
Max. DC blocking voltage
VDC
50
100
200
400
600
800
1000
1300
1600
V
Max. average forward rectified
current (fig. 1)
IF(AV)
1.0
A
Peak forward surge current
8.3 ms single half sine-wave
IFSM
30
A
Max. full load reverse current
full cycle average
at TA = 75 °C
IR(AV)
30
μA
Non-repetitive peak reverse
avalanche energy at TJ = 25 °C,
IAS = 1 A, L = 10 mH
EAS
Operating junction and storage
temperature range
TJ, TSTG
Revision: 11-Dec-13
5
- 65 to + 175
V
mJ
°C
Document Number: 88546
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BYM10-xxx, GL41x
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
TEST
CONDITIONS
PARAMETER
Max.
instantaneous
forward voltage
Max. DC
reverse current
at rated DC
blocking
voltage
Typical junction
capacitance
1.0 A
SYMBOL
BYM
10-50
BYM
10-100
BYM
10-200
BYM
10-400
BYM
10-600
BYM
BYM
10-800 10-1000
GL41A
GL41B
GL41D
GL41G
GL41J
GL41K
1.1
VF
UNIT
GL41T
GL41Y
1.2
TA = 25 °C
V
10
IR
TA = 125 °C
4.0 V, 1 MHz
GL41M
μA
50
CJ
8.0
pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Typical thermal resistance
BYM
10-50
BYM
10-100
BYM
10-200
BYM
10-400
BYM
10-600
BYM
10-800
BYM
10-1000
GL41A
GL41B
GL41D
GL41G
GL41J
GL41K
GL41M
RJA (1)
75
(2)
30
RJT
UNIT
GL41T GL41Y
°C/W
Notes
(1) Thermal resistance from junction to ambient, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal
(2) Thermal resistance from junction to terminal, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
BYM10-600-E3/96
0.114
96
1500
7" diameter plastic tape and reel
BYM10-600-E3/97
0.114
97
5000
13" diameter plastic tape and reel
GL41J-E3/96
0.114
96
1500
7" diameter plastic tape and reel
GL41J-E3/97
0.114
97
5000
13" diameter plastic tape and reel
BYM10-600HE3/96 (1)
0.114
96
1500
7" diameter plastic tape and reel
BYM10-600HE3/97 (1)
0.114
97
5000
13" diameter plastic tape and reel
GL41JHE3/96 (1)
0.114
96
1500
7" diameter plastic tape and reel
(1)
0.114
97
5000
13" diameter plastic tape and reel
GL41JHE3/97
Note
(1) AEC-Q101 qualified
Revision: 11-Dec-13
Document Number: 88546
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BYM10-xxx, GL41x
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
10
GL41A thru GL41M
Instantaneous Reverse Current (µA)
Average Forward Rectified Current (A)
1.0
0.75
60 Hz
Resistive or
Inductive Load
GL41T thru GL41Y
0.50
0.25
0.1
TJ = 25 °C
0.01
0
25
50
75
100
125
150
0
175
20
40
60
80
Terminal Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Forward Current Derating Curve
Fig. 4 - Typical Reverse Characteristics
30
25
20
GL41A thru GL41M
15
10
5.0
0
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
1
10
1
100
1
10
100
Number of Cycles at 60 Hz
Reverse Voltage (V)
Fig. 2 - Max. Non-Repetitive Peak Forward Surge Current
Fig. 5 - Typical Junction Capacitance
10
100
Transient Thermal Impedance (°C/W)
Instantaneous Forward Current (A)
100
100
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
Junction Capacitance (pF)
Peak Forward Surge Current (A)
TJ = 100 °C
1
GL41A thru GL41J
GL41K thru GL41Y
1
TJ = 25 °C
Pulse Width = 300 µs
1 % Duty Cycle
0.1
0.01
0.4
0.6
0.8
1.0
1.2
1.4
1.6
(
10
1
Mounted on 0.20" x 0.27" (5 mm x 7 mm)
Copper Pad Areas
0.1
0.01
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 6 - Typical Transient Thermal Impedance
Revision: 11-Dec-13
Document Number: 88546
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BYM10-xxx, GL41x
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-213AB
Solderable Ends
1st Band
Mounting Pad Layout
0
D2 = D1 +- 0.008
(0.20)
0.138 (3.5) MAX.
D2
0.022 (0.56)
0.018 (0.46)
D1 =
0.105 (2.67)
0.095 (2.41)
0.022 (0.56)
0.018 (0.46)
0.205 (5.2)
0.185 (4.7)
0.118 (3.0) MIN.
0.049 (1.25) MIN.
0.238 (6.0) REF.
1st band denotes type and positive end (cathode)
Revision: 11-Dec-13
Document Number: 88546
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000