BYM11-xxx, RGL41x Datasheet

BYM11-xxx, RGL41x
www.vishay.com
Vishay General Semiconductor
Surface Mount Glass Passivated Junction Fast Switching Rectifier
FEATURES
SUPERECTIFIER®
• Superectifier structure for high reliability condition
• Ideal for automated placement
• Fast switching for high efficiency
• Low leakage current
• High forward surge capability
• Meets MSL level 1, per J-STD-020, LF maximum peak of
250 °C
DO-213AB
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
IF(AV)
1.0 A
VRRM
50 V to 1000 V
IFSM
30 A
trr
150 ns, 250 ns, 500 ns
MECHANICAL DATA
VF
1.3 V
TJ max.
175 °C
Package
DO-213AB (GL41)
Diode variation
Single die
Case: DO-213AB, molded epoxy over glass body
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
TYPICAL APPLICATIONS
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
For use in fast switching rectification of power supply,
inverters, converters, and freewheeling diodes for
consumer, automotive and telecommunication.
Polarity: Two bands indicate cathode end - 1st band
denotes device type and 2nd band denotes repetitive peak
reverse voltage rating
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
FAST SWITCHING TIME DEVICE:
1ST BAND IS RED
SYMBOL
Polarity color bands (2nd band)
BYM
11-50
BYM
11-100
BYM
11-200
BYM
11-400
RGL41A
RGL41B
Gray
Red
Orange
Yellow
Green
Blue
Violet
100
200
400
600
800
1000
RGL41D RGL41G
BYM
11-600
RGL41J
BYM
11-800
BYM
11-1000
UNIT
RGL41K RGL41M
Maximum repetitive peak reverse voltage
VRRM
50
Maximum RMS voltage
VRMS
35
70
140
280
420
560
700
V
Maximum DC blocking voltage
VDC
50
100
200
400
600
800
1000
V
Maximum average forward rectified
current at TT = 55 °C
IF(AV)
1.0
A
Peak forward surge current 8.3 ms single
half sine-wave superimposed on rated
load
IFSM
30
A
Maximum full load reverse current, full
cycle average at TA = 55 °C
IR(AV)
50
μA
TJ, TSTG
- 65 to + 175
°C
Operating junction and storage
temperature range
Revision: 11-Dec-13
V
Document Number: 88547
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BYM11-xxx, RGL41x
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
Maximum
instantaneous
forward voltage
1.0 A
SYMBOL
BYM
11-50
BYM
11-100
BYM
11-200
VF
Maximum DC reverse
current at rated DC
blocking voltage
BYM
11-400
BYM
11-600
BYM
11-800
BYM
UNIT
11-1000
1.3
TA = 25 °C
V
5.0
IR
μA
TA = 125 °C
50
Maximum reverse
recovery time
IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A
trr
Typical junction
capacitance
4.0 V, 1 MHz
CJ
150
250
500
ns
15
pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Maximum thermal resistance
BYM
11-50
BYM
11-100
BYM
11-200
BYM
11-400
RJA (1)
75
(2)
30
RJT
BYM
11-600
BYM
11-800
BYM
11-1000
UNIT
°C/W
Notes
(1) Thermal resistance from junction to ambient, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal
(2) Thermal resistance from junction to terminal, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
RGL41J-E3/96
0.114
96
1500
7" diameter plastic tape and reel
RGL41J-E3/97
0.114
97
5000
13" diameter plastic tape and reel
BYM11-600-E3/96
0.114
96
1500
7" diameter plastic tape and reel
BYM11-600-E3/97
0.114
97
5000
13" diameter plastic tape and reel
RGL41JHE3/96 (1)
0.114
96
1500
7" diameter plastic tape and reel
RGL41JHE3/97 (1)
0.114
97
5000
13" diameter plastic tape and reel
BYM11-600HE3/96 (1)
0.114
96
1500
7" diameter plastic tape and reel
(1)
0.114
97
5000
13" diameter plastic tape and reel
BYM11-600HE3/97
Note
(1) AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
30
Resistive or
Inductive Load
Peak Forward Surge Current (A)
Average Forward Rectified Current (A)
1.25
1.00
0.75
0.50
0.25
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
25
20
15
10
0
0
25
50
75
100
125
150
175
1
10
100
Terminal Temperature (°C)
Number of Cycles at 60 Hz
Fig. 1 - Forward Current Derating Curve
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Revision: 11-Dec-13
Document Number: 88547
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BYM11-xxx, RGL41x
www.vishay.com
Vishay General Semiconductor
100
Junction Capacitance (pF)
Instantaneous Forward Current (A)
10
1
TJ = 25 °C
Pulse Width = 300 µs
1 % Duty Cycle
0.1
0.01
0.4
10
1
0.6
0.8
1.0
1.2
1.4
1.6
10
1
100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 5 - Typical Junction Capacitance
100
1
Transient Thermal Impedance (°C/W)
10
Instantaneous Reverse Current (µA)
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
TJ = 100 °C
0.1
TJ = 25 °C
0.01
0
20
40
60
80
100
10
1
Mounted on 0.20" x 0.27" (5 mm x 7 mm)
Copper Pad Areas
0.1
0.01
0.1
1
10
100
Percent of Rated Peak Reverse Voltage (%)
t - Pulse Duration (s)
Fig. 4 - Typical Reverse Characteristics
Fig. 6 - Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-213AB
Solderable Ends
1st Band
Mounting Pad Layout
0
D2 = D1 +- 0.008
(0.20)
0.138 (3.5) MAX.
D2
0.022 (0.56)
0.018 (0.46)
D1 =
0.105 (2.67)
0.095 (2.41)
0.022 (0.56)
0.018 (0.46)
0.205 (5.2)
0.185 (4.7)
0.118 (3.0) MIN.
0.049 (1.25) MIN.
0.238 (6.0) REF.
1st band denotes type and positive end (cathode)
Revision: 11-Dec-13
Document Number: 88547
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000