SENSITRON SEMICONDUCTOR SHD219401 TECHNICAL DATA DATA SHEET 850, REV. - HERMETIC POWER MOSFET N-CHANNEL FEATURES: 60 Volt, 0.035 Ohm, 20A MOSFET Hermetic Surface Mount Package Fast Switching Low RDS (on) Electricly Equivalent to IRFY044 Series MAXIMUM RATINGS ALL RATINGS ARE AT TC = 25C UNLESS OTHERWISE SPECIFIED. RATING GATE TO SOURCE VOLTAGE ON-STATE DRAIN CURRENT @ TC = 25C PULSED DRAIN CURRENT @ TC = 25C OPERATING AND STORAGE TEMPERATURE THERMAL RESISTANCE, JUNCTION TO CASE TOTAL DEVICE DISSIPATION @ TC = 25C ELECTRICAL CHARACTERISTICS DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 1.0mA TOTAL GATE CHARGE VGS = 10V, ID = 20A, VDS = 0.5 x VDS Max. GATE TO SOURCE ON-STATE VOLTAGE VGS = 10V, ID = 20A, VDS = 0.5 x VDS Max. GATE DRAIN CHARGE VGS = 10V, ID = 20A, VDS = 0.5 x VDS Max. STATIC DRAIN TO SOURCE ON STATE RESISTANCE VGS = 10V, ID = 10A GATE THRESHOLD VOLTAGE VDS = VGS, ID = 250mA FORWARD TRANSCONDUCTANCE VDS 15V, ID = 20A ZERO GATE VOLTAGE DRAIN CURRENT VDS = 0.8xMax. Rating, VGS = 0V VDS = 0.8xMax. Rating, VGS = 0V, TJ = 125C GATE TO SOURCE LEAKAGE FORWARD VGS = 20V GATE TO SOURCE LEAKAGE REVERSE VGS = -20V TURN ON DELAY TIME VDD = 30V, RISE TIME ID =20A, TURN OFF DELAY TIME RG = 9.1W, FALL TIME VGS = 10V DIODE FORWARD VOLTAGE TC = 25C, IS = 20A, VGS = 0V REVERSE RECOVERY TIME TJ = 25C, IS = 20A, di/ds 100A/msec, VDD 50V INPUT CAPACITANCE VGS = 0 V OUTPUT CAPACITANCE VDS = 25 V REVERSE TRANSFER CAPACITANCE f = 1.0MHz SYMBOL VGS ID IDM TOP/TSTG RthJC PD MIN. -55 - TYP. - MAX. 20 20 128 +150 0.65 80 UNITS Volts Amps Amps C C/W Watts BVDSS 60 - - Volts Qg 29 - 88 nC Qgs 6.7 - 15 nC Qgd 18 - 52 nC - - 2.0 17 - 0.040 4.0 - W Volts S(1/W) - - mA IGSS - - td(ON) tr td(OFF) tf VSD - - - - 25 250 100 -100 23 130 81 79 2.5 trr - - 220 Ciss Coss Crss - 2400 1100 230 - RDS(ON) VGS(th) gfs IDSS 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web Site - http://www.sensitron.com E-mail Address - [email protected] nA nsec Volts nsec pF SHD219401 SENSITRON DATA SHEET 850 REVISION MECHANICAL DIMENSIONS: in Inches / mm .145 (3.68) .037 (.94) .030 (.76) Min. .050 (1.27) 2 .375 (9.53) .140 (3.56)Typ. 1 .035 (.89) Min. .450 (11.43) 3 .415 (10.54) .157 (3.99) .625 (15.88) LCC-3P PINOUT TABLE DEVICE TYPE MOSFET LCC-3P PACKAGE PIN 1 DRAIN PIN 2 SOURCE PIN 3 GATE 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web Site - http://www.sensitron.com E-mail Address - [email protected] SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected] •