686

SENSITRON
SEMICONDUCTOR
SHD226413
TECHNICAL DATA
DATA SHEET 686, REV. -
HERMETIC POWER MOSFET
N-CHANNEL
(PRELIMINARY)
DESCRIPTION: 30 VOLT, 20 AMP, 0.02 OHM MOSFET IN A HERMETIC TO-257 PACKAGE.
MAXIMUM RATINGS
RATING
GATE TO SOURCE VOLTAGE
CONTINUOUS DRAIN CURRENT
ALL RATINGS ARE AT TA = 25•C UNLESS OTHERWISE SPECIFIED.
VGS=10V, TC = 25•C
VGS=10V, TC = 100•C
PULSED DRAIN CURRENT
@ TC = 25•C
OPERATING AND STORAGE TEMPERATURE
TERMAL RESISTANCE JUNCTION TO CASE
TOTAL DEVICE DISSIPATION @ TC = 25•C
ELECTRICAL CHARACTERISTICS
DRAIN TO SOURCE BREAKDOWN VOLTAGE
VGS = 0V, ID = 250mA
DRAIN TO SOURCE ON STATE RESISTANCE
ID = 10A, VGS = 5.0V@TJ = 25•C
FORWARD TRANSCONDUCTANCE
VDS = 3.0Vdc, IDS = 37.5A
ZERO GATE VOLTAGE DRAIN CURRENT
VDS = 30Vdc, VGS = 0Vdc
VDS = 30Vdc
VGS = 0Vdc, TJ = 125•C
GATE TO BODY LEAKAGE CURRENT
VGS = –20Vdc,
VDS = 0Vdc
TOTAL GATE CHARGE
(VGS = 5.0 Vdc,
GATE TO SOURCE CHARGE
VDS = 24Vdc,
GATE TO DRAIN CHARGE
ID = 75Adc)
TURN ON DELAY TIME
(VDS = 15V,
RISE TIME
ID = 75Adc,
TURN OFF DELAY TIME
VGS = 5.0 Vdc,
FALL TIME
RG = 4.7W)
FORWARD VOLTAGE,
(IS = 4.7Adc, VGS = 0V)
(IS = 75Adc, VGS = 0Vdc, TJ = 125•C)
REVERSE RECOVERY TIME
(IS = 75Adc, VGS = 0Vdc
REVERSE RECOVERY CHARGE
di/dt = 100A/msec)
INPUT CAPACITANCE
(VDS = 25 Vdc,
OUTPUT CAPACITANCE
VGS = 0 Vdc,
REVERSE TRANSFER CAPACITANCE
f = 1 MHz)
*Note: Current limited by pin diameter.
SYMBOL
VGS
ID
MIN.
-
TYP.
-
IDM
TOP/TSTG
R JC
PD
-55
-
-
BVDSS
30
-
-
Volts
RDS(ON)
gfs
15
6.0
55
20
-
mW
S(1/W)
-
.05
-
-
IDSS
IGSS
Qg
Qgs
Qgd
61
14
33
td(ON)
tr
td(ON)
tf
VSD
-
trr
Qrr
Ciss
Coss
Crss
-
-
-
24
493
60
149
0.97
0.87
58
.088
4025
1353
307
MAX.
–15
20
20
100
+150
10
100
+100
-100
122
28
66
48
986
120
300
1.1
5635
1894
430
UNITS
Volts
Amps
Amps(pk)
•C
•C/W
Watts
mA
nA
nC
nsec
Volts
nsec
mC
pF
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web Site - www.sensitron.com E-mail Address - [email protected]
SHD226413
SENSITRON
DATA SHEET 686
REVISION MECHANICAL DIMENSIONS: in Inches / mm
.150 (3.81
Dia.
.140 3.56)
.665 (16.89
.645 16.38)
.537 (13.64
.527 13.39)
1.132 (28.75
1.032 26.21)
.200 (5.08
.190 4.82)
.420 (10.67
.410 10.41)
1
2
.045 (1.14
.035 0.89)
.430 (10.92
.410 10.41)
3
.035 (0.89
.025 0.63)
3 Places
.100(2.54) BSC
2 Places
.120(3.05) BSC
TO-257
PINOUT TABLE
DEVICE TYPE
MOSFET IN A TO-257 PACKAGE
PIN 1
DRAIN
PIN 2
SOURCE
PIN 3
GATE
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web Site - www.sensitron.com E-mail Address - [email protected]
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected] •