SENSITRON SEMICONDUCTOR SHD230704 TECHNICAL DATA DATA SHEET 4965, REV. - HERMETIC POWER MOSFET N-CHANNEL QUAD FEATURES: • 100 Volt, 0.18 Ohm, 5A MOSFET • Fast Switching • Low RDS (on) • Characterized at VGS of 6V MAXIMUM RATINGS ALL RATINGS ARE AT TC = 25°C UNLESS OTHERWISE SPECIFIED. RATING GATE TO SOURCE VOLTAGE ON-STATE DRAIN CURRENT PULSED DRAIN CURRENT @ TC = 25°C OPERATING AND STORAGE TEMPERATURE TOTAL DEVICE DISSIPATION @ TC = 25°C THERMAL RESISTANCE, JUNCTION TO CASE SYMBOL VGS ID IDM TJ/TSTG PD RthJC MIN. -55 - TYP. - MAX. ±20 5 20 +150 27 4.7 UNITS Volts Amps Amps °C Watts °C/W BVDSS 100 - - Volts RDS(ON) - - 0.18 Ω RDS(ON) VGS(th) gfs 2.0 - 7 0.20 4.0 - Ω Volts S(1/Ω) IDSS - - µA IGSS - - td(ON) tr td(OFF) tf VSD - - 1 100 100 -100 30 30 40 30 1.5 Volts 80 nsec ELECTRICAL CHARACTERISTICS DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 250µA STATIC DRAIN TO SOURCE ON STATE RESISTANCE VGS = 10V, ID = 3.6A STATIC DRAIN TO SOURCE ON STATE RESISTANCE VGS = 6V, ID = 2.4A GATE THRESHOLD VOLTAGE VDS = VGS, ID = 250µA FORWARD TRANSCONDUCTANCE VDS = 15V; IDS = 3.6A ZERO GATE VOLTAGE DRAIN CURRENT VDS = 0.8 x Max. rating, VGS = 0V TJ = 125°C GATE TO SOURCE LEAKAGE FORWARD VGS = 20V GATE TO SOURCE LEAKAGE REVERSE VGS = -20V TURN ON DELAY TIME VDD = 50V, RISE TIME ID = 3.6A, TURN OFF DELAY TIME RG = 6Ω FALL TIME DIODE FORWARD VOLTAGE IS = 7.4A, VGS = 0V Pulse test, t ≤ 300 µs, duty cycle d ≤ 2 % REVERSE RECOVERY TIME TJ = 25°C If = 3.6A di/dt ≤ 100A/µsec INPUT CAPACITANCE VGS = 0 V OUTPUT CAPACITANCE VDS = 25 V REVERSE TRANSFER CAPACITANCE f = 1.0MHz - - - - trr Ciss Coss Crss - 370 60 30 nA nsec - • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] • pF SHD230704 SENSITRON DATA SHEET 4965, REV. - MECHANICAL DIMENSIONS: in Inches / m .011 (.279 .009 .228) .040(1.02) x 45 o Chamfer 3 Plcs .458 (11.7 .442 11.2) .050(1.27)Typ .030(.762)Typ .030Typ (.762) .310 (7.88 .290 7.36) .305 (7.75 .295 7.49) .035(.889)Typ .040(1.02) x 45 o Pin 26 Pin 1 Chamfer 3 Plcs .010(.254)Typ .095(2.42)Max LCC-28T PINOUT TABLE QUAD MOSFET LCC-28T MOSFET 1 MOSFET 2 MOSFET 3 MOSFET 4 GATE DRAIN SOURCE PIN 1 PIN 8 PIN 15 PIN 22 PINS 5, 6, 7 PINS 9, 10, 11 PINS 19, 20, 21 PINS 23, 24, 25 PINS 2, 3, 4 PINS 12, 13, 14 PINS 16, 17, 18 PINS 26, 27, 28 DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] •