SHD239608 SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 703, REV - HERMETIC POWER MOSFET N-CHANNEL FEATURES: • 600 Volt, 0.35 Ohm MOSFET • Isolated and Hermetically Sealed • Surface Mount Package • Electrically equivalent to IXFM20N60 MAXIMUM RATINGS RATING GATE TO SOURCE VOLTAGE CONTINUOUS DRAIN CURRENT ALL RATINGS ARE AT TA = 25°C UNLESS OTHERWISE SPECIFIED. VGS=10V, TC = 25°C SYMBOL VGS ID MIN. - TYP. - MAX. ±20 20 UNITS Volts Amps PULSED DRAIN CURRENT @ TC = 25°C OPERATING AND STORAGE TEMPERATURE TERMAL RESISTANCE JUNCTION TO CASE TOTAL DEVICE DISSIPATION @ TC = 25°C IDM TOP/TSTG RθJC PD -55 - - 80 +150 0.27 450 Amps °C °C/W Watts SYMBOL BVDSS MIN. 600 TYP. - MAX. - UNITS Volts - - ELECTRICAL CHARACTERISTICS CHARACTERISTIC DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 250μA DRAIN TO SOURCE ON STATE RESISTANCE VGS = 10V, ID = 10A GATE THRESHOLD VOLTAGE VDS = VGS, ID = 4mA FORWARD TRANSCONDUCTANCE VDS = 10V, ID = 10A ZERO GATE VOLTAGE DRAIN CURRENT, TJ = 25°C (VDS = 0.8xMax. Rating, VGS = 0V), TJ = 125°C GATE TO SOURCE LEAKAGE FORWARD VGS = 20V GATE TO SOURCE LEAKAGE REVERSE VGS = -20V TOTAL GATE CHARGE VGS = 10 V, GATE TO SOURCE CHARGE VDS = 300V, GATE TO DRAIN CHARGE ID = 10A TURN ON DELAY TIME VDS = 300V, RISE TIME ID = 10A, TURN OFF DELAY TIME RG = 2.0Ω, FALL TIME VGS = 10V DIODE FORWARD VOLTAGE TJ = 25°C, IF = IS VGS = 0V REVERSE RECOVERY TIME TJ = 25°C, IF = IS, di/dt ≤ = 100A/μsec REVERSE RECOVERY CHARGE INPUT CAPACITANCE VGS = 0V, VDS = 25V, OUTPUT CAPACITANCE f=1MHz REVERSE TRANSFER CAPACITANCE RDS(ON) VGS(th) gfs 2.0 11 18 IDSS - - IGSS - - Qg Qgs Qgd td(ON) tr td(OFF) tf VSD - trr Qrr Ciss Coss Crss Ω 0.35 4.5 - Volts S(1/Ω) - 151 29 60 20 43 70 40 - 250 1000 100 -100 170 40 85 40 60 90 60 1.5 Volts - 250 - nsec 1.0 - μC - - 4500 420 140 • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] • μA nA nC nsec pF SHD239608 SENSITRON DATA SHEET 703 REVISION - MECHANICAL DIMENSIONS: in Inches / mm .090±.003 (2.286±.0762) .150±.007 (3.81±.178) .040±.002 (1.016±.0508) .020±.002 (.508±.0508) .785±.005 (19.94±.127) 2 .594±.009 (15.09±.229) .257±.003 (6.53±.076) 2 1 .080±.003 (2.032±.076) 3 .487±.003 (12.37±.076) .200±.003 (5.08±.076) 2 SHD-6 PINOUT TABLE DEVICE TYPE MOSFET SHD-6 PACKAGE PIN 1 DRAIN PIN 2 SOURCE PIN 3 GATE DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •