1012

SENSITRON
SEMICONDUCTOR
SHD218505
TECHNICAL DATA
DATA SHEET 1012, REV Formerly Part Number SHD2185/A/B
HERMETIC POWER MOSFET
N-CHANNEL
FEATURES:
• 500 Volt, 0.3 Ohm, 9.0A MOSFET
• Low RDS (on)
• Equivalent to IRF450 Series
MAXIMUM RATINGS
ALL RATINGS ARE AT TA = 25°C UNLESS OTHERWISE SPECIFIED.
RATING
GATE TO SOURCE VOLTAGE
CONTINUOUS DRAIN CURRENT
@ TC = 25°C
PULSED DRAIN CURRENT
@ TC = 25°C
OPERATING AND STORAGE TEMPERATURE
TERMAL RESISTANCE JUNCTION TO CASE
TOTAL DEVICE DISSIPATION @ TC = 25°C
SYMBOL
VGS
ID
IDM
TOP/TSTG
RθJC
PD
MIN.
-55
-
TYP.
-
MAX.
±20
12
48
+150
0.6
200
UNITS
Volts
Amps
Amps(pk)
°C
°C/W
Watts
SYMBOL
BVDSS
MIN.
500
TYP.
-
MAX.
-
UNITS
Volts
VGS(th)
2.0
-
4.0
RDS(on)
-
-
0.415
Ω
-
-
IDSS
25
μA
IGSS
-
-
250
±100
mA
nA
Qg
Qgs
Qgd
td(ON)
tr
td(OFF)
tf
VSD
55
5.0
27
-
-
nC
-
-
-
120
19
70
35
190
170
130
1.7
Volts
trr
-
1600
-
nsec
-
μC
pF
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
DRAIN TO SOURCE BREAKDOWN VOLTAGE
VGS = 0V, ID = 250μA
GATE THRESHOLD VOLTAGE
VDS = VGS, ID = 250μA
DRAIN TO SOURCE ON STATE RESISTANCE
VGS = 10Vdc, ID = 8.0A
PULSE TEST, t ≤ 300 μs, DUTY CYCLE d ≤ 2%
ZERO GATE VOLTAGE DRAIN CURRENT
VDS = 0.8xMax. Rating, TJ = 25°C
VGS = 0Vdc, TJ = 125°C
GATE TO BODY LEAKAGE CURRENT
VGS = ±20Vdc,
VDS = 0
TOTAL GATE CHARGE
VGS = 10 Vdc
GATE TO SOURCE CHARGE VDS = 0.5VxMax. Rating,
GATE TO DRAIN CHARGE
ID = 12A
TURN ON DELAY TIME
VDD = 250V,
RISE TIME
ID = 12,
TURN OFF DELAY TIME
RG = 2.35Ω
FALL TIME
FORWARD VOLTAGE
IS = 12A, VGS = 0V
PULSE TEST, t ≤ 300 μs, DUTY CYCLE d ≤ 2%
REVERSE RECOVERY TIME
IF = 12A
REVERSE RECOVERY CHARGE
di/dt = 100A/μsec
VDD ≤ 50V
INPUT CAPACITANCE
VDS = 25 Vdc,
OUTPUT CAPACITANCE
VGS = 0 Vdc,
REVERSE TRANSFER CAPACITANCE
f = 1 MHz
DRAIN TO CASE CAPACITANCE
QRR
Ciss
Coss
Crss
CDC
-
14
2700
600
240
12
nsec
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web Site - www.sensitron.com • E-Mail Address - [email protected] •
SHD218505
SENSITRON
DATA SHEET, 1012 REV. -
MECHANICAL DIMENSIONS: in Inches / mm
.370±.010
(9.40±.254)
.510±.020
(12.9±.508)
.520±.020
(13.2±.508)
.370±.010
(9.40±.254)
2
.125±.010
(3.17±.254)
.030±.010
(.762±.254)
.370±.010
(9.40±.254)
.090±.010
(2.29±.254)
2
.610±.010
(15.5 ±.254)
2
.030±.010
(.762±.254)
.030±.010
(.762±.254)
3
.320±.010
(8.13±.254)
.610±.010
(15.5±.254)
3
.110 (2.80) Max
.320±.010
(8.13 ±.254)
.610±.010
(15.5±.254)
3
Alumina Ring
Terminal 1
SHD-5
.110 (2.79) Max
Moly Lid
.020±.005 R
(.508±.127 )
Copper Terminals
Alumina Ring
.130 (3.30) Max
Moly Base
Terminal 1
.020±.002
(.508±.051)
.060±.010
(1.52±.254)
Moly Lid
Alumina Ring
.015±.002
(.381±.051)
Moly Base
Terminal 1
SHD-5A
.020±.005 R
(.508±.127 )
.060±.010
(1.52±.254)
SHD-5B
PINOUT TABLE
DEVICE TYPE
MOSFET, SURFACE MOUNT
SHD-5, 5A, 5B PACKAGE
PIN 1
DRAIN
PIN 2
SOURCE
PIN 3
GATE
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web Site - www.sensitron.com • E-Mail Address - [email protected]