RF-HDT-DVBE-N0 www.ti.com SCBS858 – FEBRUARY 2007 13.56-MHz ENCAPSULATED STANDARD TRANSPONDER FEATURES • • • • • • ISO/IEC 15693-2,-3; ISO/IEC 18000-3 Compliant 13.56 MHz Operating Frequency 256 Bit User Memory in 8 x 32-Bit Blocks User and Factory Lock Per Block Application Family Identifier (AFI) Fast Simultaneous Identification (Anti-Collision) APPLICATIONS • • • • Laundry Process Automation Product Authentication Asset Management DESCRIPTION Texas Instruments’ 13.56 MHz Encapsulated Standard Transponder is compliant with the ISO/IEC 15693 and ISO/IEC 18000-3 global open standards. This product offers a user accessible memory of 256 bits, organized in 8 blocks and an optimized command set. Designed for harsh environments, such as garment tracking in laundries, each transponder has a 64-bit factory programmed Read Only Number which is also laser engraved on the transponder housing. Prior to delivery, transponders undergo complete functional and parametric testing, in order to provide the high quality that customers have come to expect from TI. The 13.56 MHz Encapsulated Standard Transponders are well suited for a variety of applications including, but not limited to, laundry garment tracking, process automation, product authentication, and asset management. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2007, Texas Instruments Incorporated RF-HDT-DVBE-N0 www.ti.com SCBS858 – FEBRUARY 2007 ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range (unless otherwise noted) UNIT Operating temperature –25 to 90 °C Storage temperature –40 to 120 (160°C for total 50 hours, 220°C for total 30 s) °C OPERATING CHARACTERISTICS over operating free-air temperature range (unless otherwise noted) PARAMETER RF-HDT-DBE-N0 Supported Standard ISO/IEC 15693-2,-3; ISO/IEC 18000-3 Resonance Frequency (at 25°C) 13.56 MHz ± 300 kHz UNIT Typ. required activation field strength to read (at 25°C) 112 dBµA/m Typ. required activation field strength to write (at 25°C) 115 dBµA/m Factory programmed Read Only Number 64 bits Memory (user programmable) 256 bits organized in 8 × 32-bit blocks Typical programming cycles (at 25°C) 100,000 Data retention time (at 25°C) > 10 years Simultaneous Identification of Tags Up to 50 tags per second (reader/antenna dependent) Dimensions ø 22 ± 0.2 mm × 3 ± 0.2 mm Weight 2.1 ± 0.2 Case Material PPS, black Protection Class IP 68 Vibration ISO/IEC 68.2.6 (10 g, 10..2000 Hz, 3 axis, 2.5 h) Mechanical Shock ISO/IEC 68.2.27 (100 g, 6 ms, 6 axis, 20 times per axis) Mechanical Stability Axial compression strength: 1000N (10 s, static) Radial compression strength: 500N (10 s, static) Isostatic water pressure: 45 bar (10 h) Chemical Resistance Typical chemicals used in laundry and dry-cleaning processes Delivery 1000 units in bulk grams SUPPORTED COMMAND SET REQUEST MODE (1) (2) REQUEST REQUEST CODE INVENTORY ADDRESSED NONADDRESSED AFI OPTIONAL FLAG Inventory 0x01 Stay Quiet 0x02 ü - - ü 0/- - ü - - 0/- Read_Single_Block Write_Single_Block 0x20 - ü ü - -/1 0x21 - ü ü - Lock_Block -/1 0x22 - ü ü - -/1 ISO 15693 Mandatory and Optional Commands (1) (2) 2 ü: Implemented -: Not applicable Submit Documentation Feedback RF-HDT-DVBE-N0 www.ti.com SCBS858 – FEBRUARY 2007 MEMORY ORGANIZATION Block Addr 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 32 bits Lock Bits F U F = Factory Lock U = User Lock User data (256 bits) X 0x0A UID Number (64 bits) AFI Submit Documentation Feedback 3 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Telephony www.ti.com/telephony Mailing Address: Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright © 2007, Texas Instruments Incorporated