TI RI-I02-112A-03

RI-I02-112A-03,, RI-I02-112B-03
www.ti.com
SCBS833 – NOVEMBER 2006
Tag-it™ HF-I PLUS TRANSPONDER INLAYS
LARGE RECTANGLE
FEATURES
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
ISO/IEC 15693-2, -3; ISO/IEC 18000-3
Compliant
13.56-MHz Operating Frequency
2048-Bit User Memory in 64-Bit × 32-Bit
Blocks
User and Factory Lock Per Block
Application Family Identifier (AFI)
Data Storage Format Identifier (DSFID)
Combined Inventory Read Block
Product Authentication
Library
Supply-Chain Management
Asset Management
Ticketing/Stored Value
DESCRIPTION
Texas Instruments Tag-it™ HF-I plus transponder inlays consist of 13.56-MHz high-frequency (HF) transponders
that are compliant with the ISO/IEC 15693 and ISO/IEC 18000-3 global open standards. These products offer a
user-accessible memory of 2048 bits, organized in 64 blocks, and an extensive command set available in six
different antenna shapes, with frequency offset for integration into paper, PVC, or other substrates.
The Tag-it HF-I plus transponder inlays are manufactured with TI’s patented laser tuning process to provide
consistent read performance. Prior to delivery, the transponders undergo complete functional and parametric
testing in order to provide the high quality that customers have come to expect from TI.
The Tag-it HF-I plus transponder inlays are well suited for a variety of applications including, but not limited to,
product authentication, library, supply-chain management, asset management, and ticketing/stored value
applications.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Tag-it is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006, Texas Instruments Incorporated
RI-I02-112A-03,, RI-I02-112B-03
www.ti.com
SCBS833 – NOVEMBER 2006
SPECIFICATIONS (1)
PART NUMBER
RI-I02-112A-03
Supported standard
Recommended operating frequency
13.56 MHz
13.86 MHz ± 200 kHz
(includes frequency offset to
compensate further integration into
paper)
14.4 MHz ± 200 kHz
(includes frequency offset to
compensate PVC lamination)
Typical required activation field strength to read (at 25°C)
94 dBµA/m (2)
94 dBµA/m (3)
Typical required activation field strength to write (at 25°C)
dBµA/m (2)
97 dBµA/m (3)
Passive resonance frequency (at 25°C)
97
Factory-programmed read-only number
Memory (user programmable)
64 bits
25k bits organized in 64-bit × 32-bit blocks
Typical programming cycles (at 25°C)
100,000
Data retention time (at 55°C)
Simultaneous identification of tags
Antenna size
>10 years
Up to 50 tags per second (reader/antenna dependent)
45 mm × 76 mm (~1.77 in × ~2.99 in)
Foil width
48 mm ± 0.5 mm (1.89 in ± 0.02 in)
Foil pitch
96 mm +0.1 mm/–0.4 mm (~3.78 in)
Thickness
Chip area: 0.355 mm (~0.014 in)
Antenna area: 0.085 mm (~0.0033 in)
Base material
Substrate: PET (polyethylenetherephtalate); Antenna: aluminum
Smallest bending radius allowed
18 mm (~0.71 in)
Operating temperature
Storage temperature (single inlay)
–25°C to 70°C
–40°C to 85°C (warpage may occur at upper temperature range)
Storage temperature (on reel)
Delivery
–40°C to 40°C
Single-row tape wound on cardboard reel with 500-mm diameter
Reel outer width: approximately 60 mm (~2.36 in)
Reel inner width: approximately 50 mm (~1.97 in)
Hub diameter: 76.2 mm (3 in)
Typical quantity of good units per reel
(1)
(2)
(3)
2
RI-I02-112B-03
ISO/IEC 15693-2, -3; ISO/IEC 18000-3
5,000
For highest possible read-out coverage, operate readers at a modulation depth of 20% or higher.
After integration into paper
After PVC lamination
Submit Documentation Feedback
RI-I02-112A-03,, RI-I02-112B-03
www.ti.com
SCBS833 – NOVEMBER 2006
SUPPORTED COMMAND SET
REQUEST MODE (1)
REQUEST
REQUEST CODE
INVENTORY
ADDRESSED
NON-ADDRESSED
SELECT
AFI
ü
ISO 15693 Mandatory and Optional Commands
Inventory
0x01
ü
–
–
–
Stay Quiet
0x02
–
ü
–
–
Read_Single_Block
0x20
ü
ü
ü
ü
ü
Write_Single_Block
0x21
–
ü
ü
ü
–
Lock_Block
0x22
–
ü
ü
ü
–
Read_Multi_Blocks
0x23
ü
ü
ü
ü
ü
Write_Multi-Blocks
0x24
–
–
–
–
–
Select Tag
0x25
–
ü
–
–
–
Reset to Ready
0x26
–
ü
ü
ü
–
Write_AFI
0x27
–
ü
ü
ü
–
Lock_AFI
0x28
–
ü
ü
ü
–
Write DSFID
0x29
–
ü
ü
ü
–
Lock DSFID
0x2A
–
ü
ü
ü
–
Get_System_info
0x2B
ü
ü
ü
ü
ü
Get_M_BLK_Sec_St
0x2C
ü
ü
ü
ü
ü
Write_2_Blocks
0xA2
–
ü
ü
ü
–
Lock_2_Blocks
0xA3
–
ü
ü
ü
–
TI Custom Commands
(1)
ü = Implemented, – = Not applicable
MEMORY ORGANIZATION
32 bits
Lock Bits
F = Factory Lock, U = User Lock
F U
Block # 1
2
3
User data
(2048 bits)
62
63
64
X
DSFID
Application
Configuration
AFI
IC Version
UID Number
(64 bits)
Factory programmed
Submit Documentation Feedback
3
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Low Power Wireless www.ti.com/lpw
Mailing Address:
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright  2007, Texas Instruments Incorporated