UGF8JD Taiwan Semiconductor CREAT BY ART 8A, 600V Isolated Ultra Fast Rectifier FEATURES - Especially suited as boost diode on continuous mode power factor correctors - Ideal Solution for hard switching condition - High capability for high di/dt operation. Downsizing of mosfet and heatsink - High surge current capability 1 - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC 2 - Halogen-free according to IEC 61249-2-21 ITO-220AC DESCRIPTION Especially suited as free wheeling or boost diode in continuous mode power factor correctors and other power switching applications. The low stored charge and ultrafast soft recovery minimizes ringing and electrical noise in power switching circuits. The family drastically cuts losses in the associated MOSFET when run at high dIF/dt. MECHANICAL DATA Case: ITO-220AC Molding compound, UL flammability classification rating 94V-0 Part no. with suffix "H" means AEC-Q101 qualified Packing code with suffix "G" means green compound (halogen-free) Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 2 whisker test Polarity: As marked Mounting torque: 0.56 Nm max. Weight: 1.7g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL UGF8JD UNIT Maximum repetitive peak reverse voltage VRRM 600 V Maximum average forward rectified current IF(AV) 8.0 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 100 A VF 2.3 V Maximum instantaneous forward voltage (Note 1) IF= 8 A Maximum reverse current @ rated VR TJ=25°C TJ=125°C Reverse recovery time IF=0.5A, IRR=0.25A, IR=1A, TJ=25°C 0.5 IR trr IF=1A, dIF/dt=-50A/μs, VR=30V, TJ=25°C Reverse recovery charges μA 100 TYP MAX 13 - - 30 TYP MAX ns IF=1A, dIF/dt=-200A/μs, VR=400V, TJ=125°C Qrr 90 - nC IF=1A, dIF/dt=-200A/μs, VR=400V, TJ=125°C IRM 5 5.5 A Typical thermal resistance Operating junction temperature range Storage temperature range RθJC 4 °C/W TJ - 55 to +150 °C TSTG - 55 to +150 °C Note 1: Pulse test with PW=300 μs, 1% duty cycle Version: C1512 UGF8JD Taiwan Semiconductor ORDERING INFORMATION PART NO. PART NO. PACKING CODE SUFFIX UGF8JD H PACKING CODE SUFFIX C0 (*) G PACKAGE PACKING ITO-220AC 50 / Tube *: Optional available EXAMPLE EXAMPLE P/N PART NO. UGF8JDHC0G UGF8JD PART NO. PACKING CODE SUFFIX H C0 PACKING CODE SUFFIX DESCRIPTION AEC-Q101 qualified Green compound G RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) FIG.1 MAXIMUM FORWARD CURRENT DERATING CURVE FIG. 2 MAXIMUM FORWARD SURGE CURRENT 100 8 6 4 Resistive or inductive load with heat sink 2 0 0 25 50 75 100 125 150 PEAK FORWARD SURGE CURRENT(A) AVERAGE FORWARD CURRENT(A) 10 90 8.3ms single half sine wave 80 70 60 50 40 30 20 10 0 1 CASE TEMPERATURE (°C) 100 NUMBER OF CYCLES AT 60 Hz FIG. 3 TYPICAL FORWARD CHARACTERISTICS FIG. 4 TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANTANEOUS REVERSE CURRENT (μA) 100 INSTANTANEOUS FORWARD CURRENT(A) 10 10 TJ=125°C 1 TJ=25°C 0.1 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 10 TJ=125°C 1 0.1 TJ=25°C 0.01 10 20 30 40 50 60 70 80 90 PERCENT OF RATED PEAK REVERSE VOLTAGE(%) 100 FORWARD VOLTAGE (V) Version: C1512 UGF8JD Taiwan Semiconductor FIG. 5 TYPICAL JUNCTION CAPACITANCE 100 CAPACITANCE (pF) f=1.0MHz Vslg=50mVp-p 10 0.1 1 10 100 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS ITO-220AC DIM. Unit (mm) Unit (inch) Min Max Min Max A 4.30 4.70 0.169 0.185 B 2.50 3.10 0.098 0.122 C 2.30 2.90 0.091 0.114 D 0.46 0.76 0.018 0.030 E 6.30 6.90 0.248 0.272 F 9.60 10.30 0.378 0.406 G 3.00 3.40 0.118 0.134 H 0.00 1.60 0.000 0.063 I 0.95 1.45 0.037 0.057 J 0.50 0.90 0.020 0.035 K 2.40 3.20 0.094 0.126 L 14.80 15.50 0.583 0.610 M - 4.10 - 0.161 N - 1.80 - 0.071 O 12.60 13.80 0.496 0.543 P 4.95 5.20 0.195 0.205 MARKING DIAGRAM P/N = Specific Device Code G = Green Compound YWW = Date Code F = Factory Code Version: C1512 UGF8JD Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Version: C1512