UNISONIC TECHNOLOGIES CO., LTD MGBR10L40C DIODE DUAL MOS GATED BARRIER RECTIFIER DESCRIPTION The UTC MGBR10L40C is a dual mos gated barrier rectifiers, it uses UTC’s advanced technology to provide customers with low forward voltage drop and high switching speed, etc. FEATURES * Low forward voltage drop * High switching speed SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free MGBR10L40CL-TA3-T MGBR10L40CG-TA3-T MGBR10L40CL-TF3-T MGBR10L40CG-TF3-T MGBR10L40CL-TQ2-T MGBR10L40CG-TQ2-T MGBR10L40CL-TQ2-R MGBR10L40CG-TQ2-R Note: Pin Assignment: A: Anode K: Cathode Package TO-220 TO-220F TO-263 TO-263 Pin Assignment 1 2 3 A K A A K A A K A A K A Packing Tube Tube Tube Tape Reel MARKING TO-220 / TO-220F www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd TO-263 1 of 3 QW-R204-056.D MGBR10L40C DIODE ABSOLUTE MAXIMUM RATINGS (PER LEG) (TA=25°C unless otherwise specified) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VRM 40 V Working Peak Reverse Voltage VRWM 40 V Peak Repetitive Reverse Voltage VRRM 40 V Average Rectified Forward Current Per Leg 5 A IO (Rated VR-20KHz Square Wave) – 50% Total 10 A duty cycle Non-Repetitive Peak Forward Surge Current 8.3ms Single IFSM 120 A Half Sine-Wave Superimposed on Rated Load Peak Repetitive Reverse Surge Current (2μS-1kHz) IRRM 2 A Operating Junction Temperature TJ -65 ~ +150 °C Storage Temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER SYMBOL θJA Junction to Ambient Junction to Case TO-220/TO-263 TO-220F θJC RATINGS 62.5 2 4 UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS (TA =25°C, unless otherwise specified.) PARAMETER Reverse Breakdown Voltage (Note 1) SYMBOL V(BR)R TEST CONDITIONS IR=0.50mA IF=5A, TJ=25°C Forward Voltage Drop VFM IF=5A, TJ=125°C VR=40V, TJ=25°C Leakage Current (Note 1) IRM VR=40V, TJ=125°C Notes: 1. Short duration pulse test used to minimize self-heating effect. 2. Thermal resistance junction to case mounted on heatsink. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 40 TYP MAX UNIT V 0.55 V 0.52 V 500 μA 50 mA 2 of 3 QW-R204-056.D MGBR10L40C DIODE TYPICAL CHARACTERISTICS Forward Derating Curve Typical Forward Characteristics Instantantaneous Forward Current (A) Average Rectified Current (A) 16 14 12 10 8 6 4 2 0 0 25 50 75 100 125 150 175 100 125°C 10 25°C 1.0 IF Pulse 0.1 Width=300uS 0.4 0.2 0.6 0.8 1.0 Instantaneous Forward Voltage (V) Case Temperature (°C) Typical Reverse Characteristics Instantaneous Reverse Current (A) 1E-1 1E-2 1E-3 1E-4 1E-5 1E-6 1E-7 VR=60V 25 50 75 100 125 150 Case Temperature (°C) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R204-056.D