Zener Diodes MAZ2000 Series (MA2000 Series) Silicon planar type Unit: mm For stabilization of power supply • High reliability, achieved by the combination the planar type and the glass seal • Large power dissipation: PD = 1 W • Wide voltage range: VZ = 5.1 V to 56.0 V • Easy-to-use because of the finely divided zener voltage ranks, such as A and B ranks 27 min. Colored band indicatesVz classification 4.0±0.5 27 min. +0.4 2.6–0.2 φ 0.8±00.5 ■ Features Anode Cathode 1st Band 2nd Band 3rd Band ■ Absolute Maximum Ratings Ta = 25°C Parameter Symbol Rating Unit Repetitive peak forward current IFRM 400 mA Ptot 1 W PZSM 75 W Junction temperature Tj 200 °C Rank A B Storage temperature Tstg −55 to +200 °C Color Blue Red Total power dissipation *1 Non-repetitive reverse surge power dissipation *2 1: Cathode 2: Anode DO-41-A1 Package • Color indication of VZ rank classification Note) *1: With a printed circuit board *2: t = 100 µs, Tj = 150°C ■ Common Electrical Characteristics Ta = 25°C *1 Parameter Symbol Conditions Forward voltage VF IF = 200 mA *2 Zener voltage Min Typ Max Unit 1 V VZ IZ Specified value V Zener operating resistance RZ IZ Specified value Ω Reverse current IR VR Specified value Temperature coefficient of zener voltage *3 SZ IZ Specified value Terminal capacitance Ct VR Specified value Refer to the list of the electrical characteristics within part numbers µA mV/°C pF Note) 1．Rated input/output frequency: 5 MHz 2．*1: The VZ value is for the temperature of 25°C. In other cases, carry out the temperature compensation. *2: Guaranteed at 20 ms after power application. *3: Tj = 25°C to 150°C Note) The part number in the parenthesis shows conventional part number. Publication date: February 2002 SKE00002BED 1 MAZ2000 Series ■ Electrical characteristics within part numbers Ta = 25°C Zener voltage Part Number MAZ2051 MAZ20510A MAZ20510B MAZ2056 MAZ20560A MAZ20560B MAZ2062 MAZ20620A MAZ20620B MAZ2068 MAZ20680A MAZ20680B MAZ2075 MAZ20750A MAZ20750B MAZ2082 MAZ20820A MAZ20820B MAZ2091 MAZ20910A MAZ20910B MAZ2100 MAZ21000A MAZ21000B MAZ2110 MAZ21100A MAZ21100B MAZ2120 MAZ21200A MAZ21200B MAZ2130 MAZ21300A MAZ21300B MAZ2150 MAZ21500A MAZ21500B MAZ2160 MAZ21600A MAZ21600B MAZ2180 MAZ21800A MAZ21800B MAZ2200 MAZ22000A MAZ22000B 2 VZ (V) IZ (mA) Min Nom Max 4.8 5.1 5.4 40 4.8 5.15 5.05 5.4 5.2 5.6 6.0 40 5.3 5.7 5.6 6.0 5.8 6.2 6.6 40 5.8 6.2 6.1 6.5 6.4 6.8 7.2 40 6.4 6.8 6.7 7.1 7.0 7.5 7.9 40 7.0 7.45 7.35 7.8 7.7 8.2 8.7 40 7.7 8.2 8.1 8.6 8.5 9.1 9.6 40 8.5 9.05 8.95 9.5 9.4 10.0 10.6 40 9.4 10 9.9 10.5 10.4 11.0 11.6 20 10.4 11.05 10.85 11.5 11.4 12.0 12.7 20 11.4 12.1 11.9 12.6 12.4 13.0 14.1 20 12.4 13.25 13.15 14.0 13.8 15.0 15.6 20 13.8 14.7 14.5 15.4 15.3 16.0 17.1 20 15.3 16.3 16.1 17.1 16.8 18.0 19.1 20 16.8 18.0 17.8 19.0 18.8 20.0 21.2 20 18.8 20.0 19.8 21.0 Zener operating resistance IR (µA) RZ (Ω) VR IZ (V) Max (mA) Max Reverse current Temperature Terminal coefficient of capacitance Marking symbol zener voltage (Color indication) C (pF) SZ (mV/°C) t (VR = 0 V) IZ f = 1 MHz (mA) Typ Typ 1st. 2nd. 3rd. 1 20 40 10 40 0 200 Green Brown Brown 2 20 40 8 40 1.5 180 Green Blue Blue 3 20 40 6 40 2.4 330 Blue Red Red 3 10 40 6 40 3.1 280 Blue Gray Gray 3 10 40 5 40 3.8 250 4 10 40 5 40 4.5 230 Gray 5 10 40 6 40 5.4 220 White Brown Brown 7 10 40 6 40 6.3 200 Brown Black 7 5 20 8 20 7.4 160 Brown Brown 8 5 20 8 20 8.4 160 Brown 9 5 20 10 20 9.4 155 Brown Orange 10 5 20 12 20 11.4 150 Brown Green 11 5 20 12 20 12.5 135 Brown Blue 12 5 20 15 20 14.5 110 Brown Gray 14 5 20 15 20 16.6 100 SKE00002BED Purple Green Green Red Red Red Black Red MAZ2000 Series ■ Electrical characteristics within part numbers (continued) Ta = 25°C Part number VZ IZ (mA) Min 20.8 10 20.8 21.85 22.8 10 22.8 24.15 25.1 10 25.1 26.9 28.0 10 28.0 29.9 31.0 10 31.0 32.86 34.0 10 34.0 35.84 10 37.0 10 40.0 10 44.0 10 48.0 10 52.0 MAZ2220 MAZ22200A MAZ22200B MAZ2240 MAZ22400A MAZ22400B MAZ2270 MAZ22700A MAZ22700B MAZ2300 MAZ23000A MAZ23000B MAZ2330 MAZ23300A MAZ23300B MAZ2360 MAZ23600A MAZ23600B MAZ2390 MAZ2430 MAZ2470 MAZ2510 MAZ2560 (V) Nom 22.0 24.0 27.0 30.0 33.0 36.0 39.0 43.0 47.0 51.0 56.0 Zener Temperature Terminal operating coefficient of Marking symbol capacitance resistance zener voltage (Color indication) Ct (pF) RZ (Ω) SZ (mV/°C) (VR = 0 V) IZ IZ f = 1 MHz Typ (mA) Max (mA) Typ 1st. 2nd. 3rd. Reverse current Zener voltage Max 23.3 22.15 23.2 25.6 24.35 25.6 28.9 27.0 28.9 32.0 30.1 32.0 35.0 33.14 35.0 38.0 36.16 38.0 41.0 46.0 50.0 54.0 60.0 IR (µA) VR (V) Max 15 5 10 20 10 18.6 95 Red Red 16 5 10 20 10 20.7 90 Red Yellow 18 2 10 25 10 23.8 85 Red Purple 20 2 10 25 10 26.9 80 Orange Black 22 2 10 30 10 30.0 75 Orange Orange 24 2 10 30 10 33.4 70 Orange Blue 26 29 31 33 35 5 5 5 5 5 10 10 10 10 10 50 50 50 50 50 10 10 10 10 10 36.3 41.1 44.9 48.6 54.9 65 60 55 50 45 Orange White Yellow Orange Yellow Purple Green Brown Green Blue Note) 1. The VZ value is the one after power application for 20 ms at Ta = 25°C. 2. The zener voltage temperature coefficient is the one for Tj = 25°C to 150°C. Ptot Ta Ptot Ta 1.6 l l 25 mm φ 4 mm 0.8 l = 20 mm 10 mm 0.4 0 0 40 80 120 160 104 200 Ambient temperature Ta (°C) 240 Non-repetitive reverse surge power dissipation PZSM (W) 1.2 l Power dissipation Ptot (W) 2 mm Power dissipation Ptot (W) PZSM tW 1.6 l 1.2 0.8 l = 27 mm 20 mm 0.4 0 0 40 80 120 160 200 Ambient temperature Ta (°C) SKE00002BED 240 PZSM tW Non repetitive 103 102 Tj = 25°C 10 1 0.1 0.3 1 3 10 30 100 Pulse width tW (ms) 3 MAZ2000 Series IZ V Z I Z VZ MAZ2110 80 MAZ2091 120 80 MAZ2150 60 MAZ2160 MAZ2180 MAZ2200 MAZ2220 MAZ2240 40 20 40 0 0 0 2 4 6 8 10 10 IZ V Z 20 30 0 20 Tj = 25°C Dynamic Characteristics 0 MAZ2360 MAZ2330 20 MAZ2300 40 Zener current IZ (mA) 80 MAZ2270 40 8 10 12 MAZ2390 MAZ2430 MAZ2470 MAZ2510 MAZ2560 60 40 20 0 6 0 0 Zener voltage VZ (V) 10 20 30 40 0 Zener voltage VZ (V) 20 Zth tW Zener operating resistance RZ (Ω) Thermal impedance Zth (°C / mW) 80 Ta = 25°C 50 Zth-a 0.1 Zth-m 0.01 0.001 1 10 102 103 104 105 30 10 5 3 MAZ2200 MAZ2150 1 MAZ2091 MAZ2068 0.5 0.3 0.1 1 3 5 10 30 50 Zener current IZ (mA) Pulse width tW (s) 4 60 RZ IZ 100 Heat sink Thickness t = 1.6 mm Copper foil t = 0.035 mm Anode side φ 3 mm Cathode side φ 3 mm 1 Lead distance 5 mm 10−1 40 Zener voltage VZ (V) 10 10−2 80 IZ V Z MAZ2110 MAZ2120 MAZ2130 MAZ2150 MAZ2160 MAZ2180 MAZ2200 MAZ2220 MAZ2240 Zener current IZ (mA) MAZ2075 MAZ2082 MAZ2091 MAZ2100 80 60 60 100 80 MAZ2047 MAZ2051 MAZ2056 MAZ2062 MAZ2068 0.0 00 1 10−3 40 Zener voltage VZ (V) Tj = 25°C Dynamic Characteristics 160 4 10 I Z VZ Tj = 25°C Dynamic Characteristics 2 20 40 100 0 MAZ2390 MAZ2430 MAZ2470 MAZ2510 MAZ2560 Zener voltage VZ (V) 200 120 30 0 0 12 Zener voltage VZ (V) Zener current IZ (mA) Zener current IZ (mA) MAZ2075 MAZ2082 MAZ2130 MAZ2270 Zener current IZ (mA) MAZ2062 MAZ2068 MAZ2100 Zener current IZ (mA) 160 Ta = 25°C Static Characteristics MAZ2120 MAZ2051 MAZ2056 Ta = 25°C Static Characteristics MAZ2330 MAZ2047 40 MAZ2360 Ta = 25°C Static Characteristics 200 IZ V Z 100 MAZ2300 240 SKE00002BED 100 MAZ2000 Series Temperature coefficient of zener voltage SZ (mV / °C) SZ IZ 8 Tj = 25°C to 150°C MAZ2100 6 MAZ2091 MAZ2082 4 MAZ2075 MAZ2062 2 MAZ2056 MAZ2051 0 MAZ2047 MAZ2043 −2 MAZ2039 MAZ2036 −4 0 10 20 30 40 50 Zener current IZ (mA) SKE00002BED 5 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR