ESD Diodes MAZL000H Series Silicon planar type Unit: mm 2.90+0.20 –0.05 1.9±0.1 (0.95) (0.95) 5 1.50+0.25 –0.05 • Four elements anode-common type • Ptot = 200 mW 2 0.4±0.2 4 2.8+0.2 –0.3 3 ■ Features 5˚ For surge absorption circuit 0.16+0.10 –0.06 1 (0.65) 0.30+0.10 –0.05 Symbol Rating Unit Ptot 200 mW Total power dissipation * Junction temperature Tj 150 °C Storage temperature Tstg −55 to +150 °C Note) *: With a printed circuit board 0 to 0.1 Parameter 1.1+0.2 –0.1 ■ Absolute Maximum Ratings Ta = 25°C 1.1+0.3 –0.1 10˚ 1: Cathode 1 2: Cathode 2 3: Cathode 3 EIAJ: SC-74A 4: Anode 1, 2 Anode 3, 4 5: Cathode 4 Mini5-G1 Package Internal Connection 3 4 5 1 2 ■ Common Electrical Characteristics Ta = 25°C *1 Parameter Zener voltage*2 Symbol VZ Conditions IZ Min Typ Max Specified value Zener knee operating resistance RZK IZ Specified value Zener operating resistance RZ IZ Specified value Reverse current IR VR Specified value Unit V Refer to the list of the electrical characteristics within part numbers Ω Ω µA Note) 1. Test method according to the JIS C7031 testing 2. Electrostatic breakdown voltage is ±10 kV Test method: IEC1000-4-2 (C = 150 pF, R = 330 Ω, Contact discharge: 10 times) 3. *1: The VZ value is for the temperature of 25°C. In other cases, carry out the temperature compensation. *2: Guaranteed at 20 ms after power application. Publication date: February 2002 SKE00011BED 1 MAZL000H Series ■ Electrical characteristics within part numbers Ta = 25°C Zener voltage Part number Reverse current VZ (V) IR (mA) VR Max (V) Zener operating resistance RZ (Ω) RZK (Ω) IZ = 5 mA IZ = 0.5 mA Max Max Marking symbol Min Nom Max IZ (mA) MAZL062H 5.8 6.2 6.6 5 0.2 4 50 100 6.2Z MAZL068H 6.4 6.8 7.2 5 0.1 4 30 60 6.8Z MAZL082H 7.7 8.2 8.7 5 0.1 5 30 60 8.2Z MAZL100H 9.4 10.0 10.6 5 0.05 7 30 60 10Z MAZL120H 11.4 12.0 12.7 5 0.05 9 30 80 12Z Note) 1. The VZ value is the one after power application for 20 ms at Ta = 25°C. 2. The zener voltage temperature coefficient is the one for Tj = 25°C to 150°C. Ptot Ta I Z VZ 250 100 Ta = 25°C 0.8 mm Cu foil t = 0.035 mm 50 100 150 200 250 4 Ambient temperature Ta (°C) 6 Zener operating resistance RZ (Ω) MAZL062H MAZL120H 10 MAZL100H MAZL082H MAZL068H 1 0.5 0.3 0.1 1 3 5 10 30 50 Zener current IZ (mA) 2 100 Temperature coefficient of zener voltage SZ (mV / °C) Ta = 25°C 3 Forward current IF (mA) MAZL120H 0.1 8 10 12 14 0 0.2 0.4 12 0.6 0.8 1.2 Ct VR 30 Ta = 25°C to 150°C Ta = 25°C MAZL120H 10 25 8 MAZL100H 6 MAZL082H 4 MAZL068H 2 0 1.0 Forward voltage VF (V) SZ IZ 50 5 1 Zener voltage VZ (V) RZ IZ 100 30 10 0.01 0.001 Terminal capacitance Ct (pF) 0 MAZL100H 0.01 MAZL082H 50 0.1 MAZL068H 100 1 MAZL062H 150 0 Ta = 25°C 10 Zener current IZ (mA) Power dissipation Ptot (mW) 10 mm 10 mm 200 IF V F 100 MAZL062H 0 10 20 30 40 50 Zener current IZ (mA) SKE00011BED 20 MAZL068H 15 MAZL062H MAZL082H 10 MAZL100H 5 60 0 MAZL120H 0 2 4 6 8 10 Reverse voltage VR (V) 12 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR