RG110B THRU RG110M SINTERED GLASS PASSIVATED JUNCTION FAST RECOVERY RECTIFIER Reverse Voltage - 100 to 1000 Volts Forward Current - 1.0 Ampere R-1 .787(20.0) MIN. FEATURES * Glass passivated cavity-free junction .025(0.64) .021(0.53) * For use in high frequence rectifier circuits DIA. * Fast switching for high efficiency o * 1.0 Ampere operation at TA=55 C with no thermal runaway * Typical IR less than 0.1uA .138(3.5) .114(2.9) o .787(20.0) MIN. * High temperature soldering guaranteed: 260 C/10 seconds, .102(2.6) .087(2.2) 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension DIA. * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 MECHANICAL DATA Case : R-1 molded plastic over glass body Terminals : Tin Plated, solderable per MIL-STD-750, *Dimensions in inches and (millimeters) Method 2026 Polarity : Color band denotes cathode end Weight : 0.064 ounes , 0.181 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature SYMBOLS RG110B RG110D RG110G RG110J RG110K RG110M UNITS Maximum repetitive peak reverse voltage VRRM 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 70 140 280 420 560 700 Volts VDC 100 200 400 600 800 1000 Volts unless otherwise specified. Maximum DC blocking voltage Maximum average forward rectified current I (AV) 1.0 Amps IFSM 25 Amps VF 1.3 Volts IR 5 50 100 uA 0.375" (9.5mm) lead length (SEE FIG.1) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0 A o Maximum DC reverse current at rated DC blocking voltage TA=25 C o TA=125 C o TA=150 C Maximum reverse recovery time (NOTE 1) trr Typical junction capacitance (NOTE 2) CJ Typical thermal resistance (NOTE 3) Operating junction and storage temperature range R 150 JA TJ,TSTG 250 nS 500 pF 15 55 -65 to +175 o C/W o C NOTES : (1) Reverse recovery test condition : IF 0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, P.C.B. mounted. REV. 0 Zowie Technology Corporation RATINGS AND CHARACTERISTIC CURVES RG110B THRU RG110M FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 60Hz RESISTIVE OR INDUCTIVE LOAD 1.25 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.50 1.00 0.75 0.50 0.25 0.375" (9.5mm) LEAD LENGTH 0 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 25 20 15 10 5 0 25 50 75 100 125 150 1 175 10 o AMBIENT TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 10.00 100 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES IINSTANTANEOUS FORWARD CURRENT, AMPERES 100 NUMBER OF CYCLES AT 60Hz PULSE WIDTH=300uS 1% DUTY CYCLE 1.00 0.10 o TJ = 150 C 10 o TJ = 125 C 1 o TJ = 25 C 0.01 0.1 0.4 0.6 0.8 1.0 1.2 1.4 0 1.6 FIG.5 - TYPICAL JUNCTION CAPACITANCE TRANSIENT THERMAL IMPEDANCE( C/W) o TJ = 25 C 60 80 100 110 100 100 o JUNCTION CAPACITANCE, pF 40 FIG.6 - TYPICAL TRANSIENT THERMAL IMPEDANCE 200 60 40 20 10 6 4 2 10 1 0.1 1 .1 .2 .4 1.0 2 4 10 REVERSE VOLTAGE, VOLTS REV. 0 20 PERCENT OF RATED PEAK REVERSE VOLTAGE,% INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 100 0.01 0.10 1.0 10 100 t , PULSE DURATION, sec Zowie Technology Corporation