GP20AH THRU GP20MH SINTERED GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1000 Volts ED T N E T PA Forward Current - 2.0 Amperes DO-204AC 1.0(25.4) MIN. FEATURES * Halogen-free type * GPRC (Glass Passivated Rectifier Chip) inside * Glass passivated cavity-free junction 0.140(3.6) 0.104(2.6) DIA. * Capable of meeting environmental standards of MIL-S-19500 o * 2.0 Amperes operation at TA=55 C with no thermal runaway o * High temperature soldering guaranteed: 260 C/10 seconds, 0.300(7.6) 0.230(5.8) 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension * Plastic package has Underwriters Laboratory Flammability 1.0(25.4) MIN. Classification 94V-0 MECHANICAL DATA 0.034(0.86) 0.028(0.71) DIA. Case : JEDEC DO-204AC molded plastic over glass body Terminals : Tin Plated, solderable per MIL-STD-750, *Dimensions in inches and (millimeters) Method 2026 Polarity : Color band denotes cathode end TM Weight : 0.015 ounes , 0.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o GP20 Ratings at 25 C ambient temperature SYMBOLS unless otherwise specified. AH BH DH GH JH KH MH UNITS Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC blocking voltage Maximum average forward rectified current o I (AV) 2.0 Amps IFSM 65 Amps VF 1.0 Volts IR 5 30 80 uA CJ 25 pF 0.375" (9.5mm) lead length at TA=55 C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load Maximum instantaneous forward voltage at 2.0 A o Maximum DC reverse current at rated DC blocking voltage TA=25 C o TA=125 C o TA=150 C Typical junction capacitance (NOTE 1) Typical thermal resistance (NOTE 2) Operating junction and storage temperature range R R JA JL TJ,TSTG 35 15 -65 to +175 o C/W o C NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts. (2) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead lengths, P.C.B. mounted. REV. 0 Zowie Technology Corporation RATINGS AND CHARACTERISTIC CURVES GP20AH THRU GP20MH FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 100 60Hz RESISTIVE OR INDUCTIVE LOAD 2.5 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 3.0 2.0 1.5 1.0 0.5 0.375" (9.5mm) LEAD LENGTH 0 8.3ms SINGLE HALF SINE-WAVE 80 60 40 20 0 0 25 50 75 100 125 150 1 175 10 o AMBIENT TEMPERATURE, C NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES 10.00 IINSTANTANEOUS FORWARD CURRENT, AMPERES 100 PULSE WIDTH=300uS 1% DUTY CYCLE 1.00 0.10 o TJ = 150 C 10 o TJ = 125 C 1 o TJ = 25 C 0.1 0 20 40 60 80 100 110 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 PERCENT OF RATED PEAK REVERSE VOLTAGE,% INSTANTANEOUS FORWARD VOLTAGE, VOLTS o 60 40 20 10 6 4 2 10 1 0.1 1 .1 .2 .4 1.0 2 4 10 REVERSE VOLTAGE, VOLTS REV. 0 100 o TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p 100 JUNCTION CAPACITANCE, pF FIG.6 - TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE( C/W) FIG.5 - TYPICAL JUNCTION CAPACITANCE 200 20 40 100 0.01 0.10 1.0 10 100 t , PULSE DURATION, sec Zowie Technology Corporation