BOA5W Series 20130812A

Isolated DC-DC Converters
BOA5W Series -- 5 Watt
Bothhand USA
Features
Wide 4 : 1 Input Voltage Range(9~36V,18~75V)
Input / Output Isolation Voltage: 1.5K VDC
Extended Operating Temperature Range: -40°C to +85°C
Output Short Circuit Protection:
Continuous & Auto Recovery
Over Voltage Protection: Clamp Mode
Meet EN55022, Class A (Radiation)
Shielded Metal Case with Insulated Baseplate
Lead Free Design, RoHS Compliant
24pin DIP Package with Industry-Standard Footprint
Customer Design Available
Safety Standard/Approval : IEC/EN60950-1
Technical Specification
Model
Number
Input Voltage
Range
Description
The BOB5W Series are isolated 5W DC/DC converters.
Designed with highly efficiency, allow the operating
temperature range of these units to be -40°C to +85°C in
a 24 pin DIP package with industry-standard footprint.
Further features include wide 4 : 1 input voltage range,
short-circuit protection and over voltage protection.
Applications
These converters are well suitable for battery operated
equipment, measurement equipment, telecom, wireless
network, Industry control system, everywhere where
isolated, tightly regulated voltages and compact size are
required.
All specifications are typical at nominal input, full load and 25°C unless otherwise stated.
Output
(2) Capacitive
Output Current (mA)
Input Current (mA)
Eff .
Voltage
Load, max.
(%)
(3)
Min. Load (1)
Full. Load
No Load
Full Load
(V)
(uF)
BOA5-24S0W
3.3
34
1200
4.6
226
77
6800
BOA5-24S1W
5
4
1000
9.7
274
80
7030
BOA5-24S2W
12
0
500
7.1
316
83
1220
15
0
400
10
321
82
430
±5
0
±500
9.2
271
81
4620
BOA5-24D2W
±12
0
±250
11.7
316
83
330
BOA5-24D3W
±15
0
±200
13
316
83
200
BOA5-48S0W
3.3
49.4
1200
2.8
116
75
4400
BOA5-48S1W
5
0
1000
4.9
139
79
5460
BOA5-48S2W
12
0
500
5
160
82
660
15
0
400
5.2
160
82
330
±5
0
±500
5.4
139
79
1660
BOA5-48D2W
±12
0
±250
6.8
160
82
220
BOA5-48D3W
±15
0
±200
7.4
160
82
147
9~36V
BOA5-24S3W Nominal:24Vdc
BOA5-24D1W
18~75V
BOA5-48S3W Nominal:48Vdc
BOA5-48D1W
[email protected]
www.bothhandusa.com
Rev:20130812A
Page 1 of 7
Isolated DC-DC Converters
BOA5W Series -- 5 Watt
Bothhand USA
Input Specifications
Input Voltage
24V nominal input
9-36V
48V nominal input
18-75V
Input filter
Pi Type
Input surge voltage
24V input
50V
(100ms max.)
48V input
100V
Input reflected ripple current
Nominal Vin and full load
Start up time
Nominal Vin and constant resistive load
160mAp-p typ.
530ms typ.
Environmental Specifications
-40°C to +85°C (with derating)
Operating ambient temperature
+100°C
Maximum case temperature
-55°C to +105°C
Storage temperature range
5% to 95% RH
Relative humidity
±0.02% / °C max.
Temperature coefficient
EMC Characteristics
EN55022 (radiation)
EMI
Meet class A
Output Specifications
6 Watts max.
Output power
Voltage accuracy
Full load and nominal Vin
±2%
See table
Minimum load
Line regulation
LL to HL at full load
25% load to full load
Load Regulation
Balanced load
±0.5%
Single
±1%
Dual
±1%
Unbalanced load 25% to 100% full load
Ripple and Noise
±5%
20MHz bandwidth
80mVp-p max.
3.3Vout models
3.9V
Over voltage protection
5Vout models
6.2V
(Zener Diode Clamp)
12Vout models
15V
15Vout models
18V
See table
Capacitive load
Over load protection
% of full load at nominal input
Continuous, automatic recovery
Short circuit protection
Transient response settling time
50% load step change
Transient response over shoot
di/dt=0.8A/µs
[email protected]
150% typ.
www.bothhandusa.com
560µs typ.
≤ ±5% of Vo
Rev:20130812A
Page 2 of 7
Isolated DC-DC Converters
BOA5W Series -- 5 Watt
Bothhand USA
General Specifications
Efficiency
Nominal input
Isolation voltage
Input to output
Isolation resistance
See table
1500VDC
9
500VDC
10 Ohms min.
Isolation capacitance
300pF typ.
Switching frequency
300kHz typ.
6
Reliability, calculated MTBF
2.40 × 10 Hrs
Physical Specifications
Case material
Nickel-coated copper
Base material
Non-conductive black plastic
Silicon rubber (UL94V-0)
Potting material
1.25 × 0.80 × 0.40 Inch
Dimensions
(31.75 × 20.32 × 10.16 mm)
Weight
17.2g (0.59oz) typ.
BOA5WSeries
Output Power (%)
Power Derating Curve(4)
Ambient Temp.TA (℃)
Input voltage vs. Efficiency
Output Current vs. Efficiency
[email protected]
Efficiency (%)
BOA5-48S1W
Efficiency (%)
BOA5-48S1W
www.bothhandusa.com
Rev:20130812A
Page 3 of 7
Isolated DC-DC Converters
BOA5W Series -- 5 Watt
Bothhand USA
Input voltage (V)
Output Current (A)
BOA5-48S1W
BOA5-48S1W
Transient Response at 50%~100% Max Load
Loop Gain & Phase at Vi=48V,Full Load
Note
1. Io below this value will not damage these converters, however, they may not meet all listed specifications.
2. Typical value, tested at nominal input and full load.
3. For each output.
4. Based on BOA5-48S1W.
Mechanical Dimensions
Pin
2
3
9
11
14
16
22
23
Pin Assignment
Single
Dual
-Vin
-Vin
-Vin
-Vin
No pin
Common
No function
-Vout
+Vout
+Vout
-Vout
Common
+Vin
+Vin
+Vin
+Vin
Unit: mm [inch]
Tolerance:±0.5[0.02]
Specifications subject to change without notice.
[email protected]
www.bothhandusa.com
Rev:20130812A
Page 4 of 7
Isolated DC-DC Converters
BOA5W Series -- 5 Watt
Bothhand USA
Test Configurations
All specifications are typical at nominal input, full load and 25°C unless otherwise stated.
A
A
DC
Power Supply
DC/DC
converter
V
V
Load
◎DC Power Supply: It offers a wide voltage and current range precisely.
◎Current meter (A): Accuracy 200μA ~ 200mA 4 ranges+(0.2% rdg + 2 digits)
2000mA ~ 20A
2 ranges+(0.3% rdg + 2 digits).
◎Voltage meter (V): Accuracy +(0.03% rdg + 4 digits).
◎Load: At full load.
◎Wires: The resistance of the wires must be small.
1. Input voltage range: Narrow input voltage range(±10%)、wide input voltage range (2:1 and 4:1)。
EX: Narrow input voltage range(±10%)
5V nominal input 4.5~5.5V
12V nominal input 10.8~13.2V
24V nominal input 21.6~26.4V
Wide input voltage range 2:1
5V nominal input 12V nominal input 24V nominal input 48V nominal input 4.5~9V
9~18V
18~36V
36~75V
Wide input voltage range 4:1 (W)
24V nominal input 9~36V
48V nominal input 18~75V
2. Input power :
Pin = Vin x Iin
Vin:Input voltage
Iin:Input current
Pout = Vout x Iout
Vout:Output voltage
Iout:Output current
3. Output power :
4. Efficiency :
Efficiency =
Pout
Pin
x100%
Pout: Output power
Pin: Input power
5. Voltage accuracy:
│
│Vout-Vout(nominal)│
Vout
[email protected]
x100%
Vout:Output voltage
Vout(nominal):Nominal output voltage
www.bothhandusa.com
Rev:20130812A
Page 5 of 7
Isolated DC-DC Converters
BOA5W Series -- 5 Watt
Bothhand USA
││││
││││
6. Line regulation: (1) Wide input voltage range and regulated output voltage series.
│
│Vout(LL)-Vout(HL)│
Vout(LL)
LL: Low Line input voltage
HL: High Line input voltage
x100%
(2) Narrow input voltage range(±10%)and unregulated output voltage series.
Line regulation=
ΔVout
ΔVin
ΔVout = Vout(+10%)-Vout(-10%) x100%
Vout
Vout(+10%):Output voltage at Vin = 1.1xVin(nominal)&full load
Vout(-10%):Output voltage at Vin = 0.9xVin(nominal)&full load
Vout:Output voltage at Vin = Vin(nominal)&full load
ΔVin = Vin(+10%)-Vin(-10%) x100%
Vin(+10%):Input voltage = 1.1xVin(nominal)
Vin(-10%):Input voltage = 0.9xVin(nominal)
Vin(nominal):Nominal Input voltage
7. Load regulation :
│ x100%
│Vout(FL)-Vout(NL)│
Vout(FL)
Vout(FL): Output voltage at full load
Vout(NL): Output voltage at 25% full load or 10% full load
8. Ripple and Noise: as shown below. The bandwidth is 0-20MHz.
Ripple&Noise
Noise
Ripple
[email protected]
www.bothhandusa.com
Rev:20130812A
Page 6 of 7
Isolated DC-DC Converters
BOA5W Series -- 5 Watt
Bothhand USA
Output Ripple&Noise measurement test circuit: as shown below.
Copper strip
DC/DC
converter
Co
Oscilloscope
Load
Copper strip
Co: usually 0.47uF.
9. Temperature derating curve: The DC-DC converter will operate over a wider temperature range if less power is
Output Power (%)
drawn from the output and the device is already running. The temperature derating curve shows the operating
power-temperature range. As shown below.
Ambient Temp.TA (℃)
10. Switching frequency: The nominal operating frequency of the DC-DC converters.
11. Input to output isolation: The dielectric breakdown strength test between input and output circuits. This is the
isolation voltage the device is capable of withstanding for a specified time, usually 1 second or 1 minute.
[email protected]
www.bothhandusa.com
Rev:20130812A
Page 7 of 7