MS-328-5 S W I T C HI N G T HE S M A R T WAY MS-328-5 Mains switching Reed Sensor Flatpack Electrical Characteristics @ 25 °C Contact form Features A W / VA 10 VDC 200 VAC 260 Switching current max. A 0.3 Carry current max. A 1.4 Breakdown voltage min. VDC 400 Total resistance max. (initial) mΩ 150 Ω 10 10 Contact rating max. Switching voltage max. Insulation resistance min. Magnetical Characteristics (of unmodified Reed Switch) AT Drop out min. AT 4 Test coil TC 200 ± AT Various sensitivity ranges available Customized types available Approvals 15 - 30 1 Operating Characteristics (of unmodified Reed Switch) Switching frequency max. Adjustable switching point @ 25 °C Pull in range available Test equipment tolerance Standard Flatpack, mains voltage @ 25 °C Hz 400 Resonant frequency typ. Hz 4000 Operate time max. (incl. bounce) ms 0.6 Release time max. ms 0.2 Operating temperature °C -20 to + 85 Vibration (50-2000 Hz) g 30 Shock (1/2 sin 11 ms) g 100 Environmental Characteristics © PIC GmbH Dimensions in mm Ordering Information Packing Unit 25 pcs Weight per piece 10.8 g Weight per package 280 g Standard AT Ranges 2 = 15 to 20 AT 3 = 20 to 25 AT 4 = 25 to 30 AT Ordering Example MS-328-5-2 describes MS-328-5 with 15 to 20 AT. Page 1 of 2 Rev.: 1.3 ms3285_ds_e_1.3 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone Fax +49 911 99 59 06-0 +49 911 99 59 06-99 [email protected] www.pic-gmbh.com MS-328-5 S W I T C HI N G T HE S M A R T WAY MS-328-5 Mains switching Reed Sensor Flatpack Material Information Material Colour Housing PA-GF black Cable UL 1007/1569, AWG 20, 4 mm stripped and tinned black Potting compound Epoxy black Test Procedure of final Reed Sensor Test Parameters Test coil TC- 328 Test programs AT range Test program 2 = MS-328-5-2 3 = MS-328-5-3 4 = MS-328-5-4 Remarks When mounted onto ferromagnetic parts switching distance of MS-328-5 may reduce. Electromagnetical influences and magnetic fields may change the switching behaviour of the sensor. Only non-ferromagnetic screws to be used for mounting. Matching actuator MSM-328 available as well. Test Coil placed in vertical position Reed Sensor centered in Test Coil Reed Sensor pushed into opposite corner of Test Coil Page 2 of 2 Rev.: 1.3 ms3285_ds_e_1.3 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone Fax +49 911 99 59 06-0 +49 911 99 59 06-99 [email protected] www.pic-gmbh.com