isl95831

DATASHEET
To request the full datasheet, please visit www.intersil.com/products/isl95831
3+1 Voltage Regulator for IMVP-7/VR12™ CPUs
ISL95831
Features
Compliant with IMVP-7/VR12™, the ISL95831 provides a
complete solution for microprocessor and graphic processor
core power supply. It provides two Voltage Regulators (VRs)
with three integrated gate drivers. The first VR can be
configured as 3-, 2- or 1-phase VR while the second output is
1-phase VR, providing maximum flexibility. The two VRs share
the serial control bus to communicate with the CPU and achieve
lower cost and smaller board area compared with the two-chip
approach.
• Serial Data Bus
• Dual Outputs:
- Configurable 3-, 2- or 1-phase for the 1st Output using 2
integrated Gate Drivers
- 1-phase for the 2nd Output using an Integrated Gate
Driver
• 0.5% System Accuracy Over-Temperature
• Supports Multiple Current Sensing Methods
- Lossless Inductor DCR Current Sensing
- Precision Resistor Current Sensing
Based on Intersil’s Robust Ripple Regulator (R3) technology™,
the PWM modulator compared to traditional modulators, has
faster transient settling time, variable switching frequency
during load transients and has improved light load efficiency
with it’s ability to automatically change switching frequency.
• Differential Remote Voltage Sensing
• Programmable VBOOT Voltage at Start-up
• Resistor Programmable IMAX, TMAX for Both Outputs
The ISL95831 has several other key features. Both outputs
support DCR current sensing with single NTC thermistor for
DCR temperature compensation or accurate resistor current
sensing. Both outputs come with remote voltage sense,
programmable VBOOT voltage, programmable IMAX, TMAX,
adjustable switching frequency, OC protection and separate
Power-Good.
0.91
• Adaptive Body Diode Conduction Time Reduction
Applications
• IMVP-7/VR12 Compliant Computers
VIN = 19V
0.90
0.89
VOUT (V)
0.88
0.87
0.86
0.85
0.84
0.83
VIN = 12V
0.82
VIN = 8V
0.81
0.80
0
6
12
18
24
30 36
IOUT (A)
42
48
54
60
66
FIGURE 1. LOAD LINE REGULATION
December 22, 2011
FN7613.1
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC. 2011. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
ISL95831
For additional products, see www.intersil.com/en/products.html
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
Submit Document Feedback
2
FN7613.1
December 22, 2011