Si photodiodes S6428-01 S6429-01 S6430-01 S7505-01 RGB color sensor The S6428-01, S6429-01 and S6430-01 are color sensors designed to respectively detect monochromatic colors of blue (λp=460 nm), green (λp=540 nm) and red (λp=660 nm). The S7505-01 uses a 3-channel (RGB) photodiode having blue, green and red sensitivities, and is molded into a surface mount type package. Features Applications White balance adjustment S6428-01, S6429-01, S6430-01 Color identification Plastic package (6 × 8 mm) Projector and TV brightness level detection Spectral response range S6428-01: 400 to 540 nm (λp=460 nm) S6429-01: 480 to 600 nm (λp=540 nm) S6430-01: 590 to 720 nm (λp=660 nm) Color control Light source color temperature detection Insensitive to near IR range High sensitivity S6428-01: 0.22 A/W Typ. (λ=λp) S6429-01: 0.27 A/W Typ. (λ=λp) S6430-01: 0.45 A/W Typ. (λ=λp) Low dark current S7505-01 3 ch (RGB) Si photodiode Surface mount type plastic package (9 × 9.6 mm) High sensitivity Structure / Absolute maximum ratings Type no. S6428-01 S6429-01 S6430-01 S7505-01 Photosensitive area size Effective photosensitive area (mm) (mm2) 2.4 × 2.8 6.7 Reverse voltage VR max (V) 10 Absolute maximum ratings Operating Storage temperature temperature Topr Tstg (°C) (°C) -10 to +60 -20 to +70 Green, Red: 1.5 × 1.5 Green, Red: 2.25 Blue : 1.5 × 1.5 (2 elements) Blue : 4.5 Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. www.hamamatsu.com 1 Si photodiodes S6428-01, S6429-01, S6430-01, S7505-01 Electrical and optical characteristics (Typ. Ta=25 °C, unless otherwise noted) Type no. S6428-01 S6429-01 S6430-01 Blue S7505-01 Green Red Spectral response range λ Peak sensitivity wavelength λp Photosensitivity S λ=λp (nm) 400 to 540 480 to 600 590 to 720 400 to 540 480 to 600 590 to 720 (nm) 460 540 660 460 540 620 (A/W) 0.22 0.27 0.45 0.18 0.23 0.16 Dark current ID VR=1 V Typ. (pA) Max. (pA) 5 20 Temp. coefficient of ID Rise time tr VR=0 V RL=1 kΩ 10 to 90 % (times/°C) (μs) 1.12 10 *1 200 *1 0.5 Terminal capacitance Ct VR=0 V f=10 kHz Typ. Max. (pF) (pF) 200 400 150 300 80 150 Spectral response half width FWHM *2 (nm) 90 70 90 90 60 70 Relative sensitivity (%) *1: All elements *2: Defined as shown in the figure at right 100 50 FWHM Wavelength (nm) KSPDC0031EA 2 Si photodiodes S6428-01, S6429-01, S6430-01, S7505-01 Spectral response S6428-01, S6429-01, S6430-01 (Typ. Ta=25 °C) 0.6 Photosensitivity (A/W) 0.5 S6430-01 (Red) QE=100% 0.4 0.3 S6429-01 (Green) 0.2 S6428-01 (Blue) 0.1 0 300 500 400 600 800 700 900 1000 1100 1200 Wavelength (nm) KKSPDB0141EC S7505-01 (Typ. Ta=25 °C) 0.3 Photosensitivity (A/W) QE=100% Green 0.2 Blue Red 0.1 0 200 300 400 500 600 700 800 900 1000 1100 1200 Wavelength (nm) KMPDB0217EA 3 Si photodiodes S6428-01, S6429-01, S6430-01, S7505-01 Linearity S6428-01, S6429-01, S6430-01 S7505-01 (Typ. Ta=25 °C, VR=0 V, 2856 K) 1 mA (Typ. Ta=25 °C, VR=0 V, 2856 K) 10 μA 100 μA Short circuit current Short circuit current 1 μA S6430-01 10 μA S6429-01 1 μA S6428-01 Red 100 nA Blue Green 10 nA 100 nA 10 nA 10 100 1000 10000 1 nA 10 100000 Illuminance (lx) 100 1000 Illuminance (lx) KSPDB0324EA KSPDB0325EA Dark current vs. reverse voltage Terminal capacitance vs. reverse voltage (Typ. Ta=25 °C) 1 nA 10000 (Typ. Ta=25 °C) 1 nF Terminal capacitance Dark current 100 pA S7505-01 10 pA 1 pA S6428-01, S6429-01, S6430-01 100 pF S7505-01 (Blue) S6428-01, S6429-01 S6430-01 S7505-01 (Red, Green) 100 fA 0.01 0.1 1 10 100 Reverse voltage (V) 10 pF 0.1 1 10 100 Reverse voltage (V) KSPDB0142EC KSPDB0143EC 4 Si photodiodes S6428-01, S6429-01, S6430-01, S7505-01 Dimensional outlines (unit: mm) S6428-01, S6429-01, S6430-01 +0 6.0 - 0.3 3.4 ± 0.3 0.8 (8.5) Photosensitive area 2.8 × 2.4 +0.2 +0 4.5 - 0.5 0.3 1.4 1.0 8.0 - 0.1 +0 2.2 - 0.1 Photosensitive surface +0 7.8 - 0.1 Tolerance unless otherwise noted: ±0.15 Lead surface finish: Palladium Standard packing: tray (100 pcs/tray) KSPDA0056EA S7505-01 9.0* 1.5 ± 0.4 Photosensitive area (2 ×) 10° B B G R 9.6 * 2.54 2.54 Index (C 0.7) (2 ×) 10° (6 ×) 0.4 1.5 ± 0.4 Filter 1.5 0.7 ± 0.3 Filter 0.7 ± 0.3 1.5 1.5 0.1 ± 0.1 0.2 Anode (Blue) Cathode common Anode (Green) Anode (Red) Cathode common NC Blue Blue Green Red 1.5 0.85 0.55 0.6 (2 ×) 10° (2 ×) 10° 1.5 0.2 0.2 12.0 ± 0.3 Photosensitive surface Details of photodiode Tolerance unless otherwise noted: ±0.1 Chip position accuracy with respect to the package dimensions marked * X, Y≤±0.2 θ≤±2° Lead surface finish: gold plating Standard packing: stick (50 pcs/stick) KMPDA0073ED Note: If excessive vibration is continuously applied to the glass filter, there is a risk that the filter may come off, so secure the glass filter with a holder. 5 Si photodiodes S6428-01, S6429-01, S6430-01, S7505-01 Measured example of temperature profile with our hot-air reflow oven for product testing The S7505-01 supports lead-free soldering. After unpacking, store it in an environment at a temperature of 30 °C or less and a humidity of 60% or less, and perform soldering within 24 hours. 300 °C 235 °C max. Temperature 220 °C 190 °C 170 °C Soldering 40 s max. Preheat 70 to 90 s Time KSPDB0317EA Related information www.hamamatsu.com/sp/ssd/doc_en.html Precautions ∙ Disclaimer ∙ Metal, Ceramic, Plastic products ∙ Surface mount type products Information described in this material is current as of June, 2015. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39) 02-93581733, Fax: (39) 02-93581741 China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866 Cat. No. KSPD1013E08 Jun. 2015 DN 6