APD modules C12702 series Operates an APD with single 5 V supply (Standard type, Short-wavelengh type) Features Applications Includes a high-sensitivity APD Uses a Hamamatsu high-sensitivity Si APD. Four types are available with different spectral response ranges and photosensitive areas. APD evaluation High sensitivity detection board optimized for APD evaluation. An APD and high-speed current-to-voltage amplifier circuit are mounted on a compact board. The highspeed current-to-voltage amplifier circuit features a low-noise configuration ideal for the APD signal readout and operates at high speeds yet with high sensitivity. Spatial light transmission Bar code readers Laser radars Optical rangefinders Optical communications Easy handling Single 5 V supply operation Built-in temperature-compensated bias voltage circuit controls the bias voltage with a thermosensor to keep the APD gain constant. Gain is stabilized to as low as ±2.5 % Typ. at ambient temperatures of 25 ±10 °C. Ripple noise usually inherent to high voltage power supplies is also minimized. Compact and lightweight The circuit board is no larger than business card size, and weighs only 37 g. Low price Custom designed module available with different dimensions and specifications. Selection guide Type no. Photosensitive area (mm) C12702-03 ϕ1.0 C12702-04 ϕ3.0 C12702-11 ϕ1.0 C12702-12 ϕ3.0 Note: Gain (M) is preset to 30 prior to shipping. Frequency bandwidth -3 dB (Hz) 4 k to 100 M 4 k to 80 M 4 k to 100 M 4 k to 40 M Type of APD Peak sensitivity wavelength Standard type 800 Short-wavelength type 620 www.hamamatsu.com (nm) 1 APD modules C12702 series Block diagram High voltage generator +200 V +5 V +5 V BNC connector Voltage controller Temperature monitor APD High-Speed Current-to-voltage circuit KACCC0013EB Structure / Absolute maximum ratings Type No. C12702-03 C12702-04 C12702-11 C12702-12 Min. Typ. Absolute maximum ratings Current Board Output Storage Weight Supply Maximum Operating consumption dimension impedance temperature Incident temperature (mA) voltage Topr Tstg light level Max. Typ. Max. (mm) (Ω) (g) (V) (mW) (°C) (°C) +4.75 +5 +5.25 +50 Photosensitive area (mm) ϕ1.0 ϕ3.0 ϕ1.0 ϕ3.0 Supply voltage (V) +80 80 × 50 × 22 50 37 +7 10 0 to +60 -20 to +70 Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. Electrical and optical characteristics (Typ. Ta=25 °C, Vcc=5 V, unless otherwise noted) Photoelectric converter section (APD) Type No. C12702-03 C12702-04 C12702-11 C12702-12 Photosensitivity S M=1 (A/W) λ=800 nm λ=620 nm Spectral response range λ Peak sensitivity wavelength λp (nm) (nm) 400 to 1000 800 0.5 - 200 to 1000 620 - 0.42 Temperature stability of gain*1 25 °C ± 10 °C, M=30 (%) Typ. Max. ±2.5 ±5 High-speed amplifier section Cutoff frequency -3 dB Type No C12702-03 C12702-04 C12702-11 C12702-12 High band Low band Min. Typ. Min. Typ. (MHz) (MHz) (kHz) (kHz) 90 100 70 80 3 4 90 100 30 40 Noise equivalent power NEP (pW/Hz1/2) λ=800 nm λ=620 nm Typ. Max. Typ. Max. 0.3 0.4 - 0.6 0.8 - 0.5 1.0 1.0 2.0 FeedPhotoelectric back sensitivity*1 resis- including APD, M=30 tance (104 V/W) (kΩ) Min. Typ. Max. 9.1 -6.4 -6.8 -7.1 3.0 -2.1 -2.3 -2.4 3.9 -2.3 -2.5 -2.7 3.0 -1.8 -1.9 -2.0 Minimum derection limit Min. - (nW rms) Typ. Max. 3.0 6.0 3.6 7.2 5.0 10.0 6.3 12.6 *1: Gain is preset to 30 prior to shipping. 2 APD modules C12702 series Spectral response C12702-03/-04 (Typ. Ta=25 °C, λ=800 nm, M=30) 20 Photosensitivity (A/W) 20 Photosensitivity (A/W) C12702-11/-12 10 0 200 300 400 500 600 700 800 900 1000 1100 (Typ. Ta=25 °C, λ=650 nm, M=30) 10 0 200 300 400 500 600 700 800 900 1000 1100 Wavelength (nm) Wavelength (nm) KACCB0013EA Gain temperature characteristic KAPDB0262EB Response to stepped light input (C12702-03) (M=30) 30 Gain variation (%) 20 10 0 Typ. -10 Ta=25 °C, gain M=30, input pulse width=20 ns X-axis: 10 ns/div., Y-axis: 10 mV/div. -20 -30 0 10 20 30 40 50 60 Ambient temperature (°C) KACCB0020EB 3 APD modules C12702 series Frequency response (Typ. Ta=25 °C, λ=λp) 105 Photosensitivity (V/W) C12702-03 C12702-11 C12702-04 104 C12702-12 3 10 2 10 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz 100 MHz 1 GHz Frequency KACCB0340EA Dimensional outline (unit: mm) Power supply connecter (Supplied with cable, MOLEX 5268-02A) 1: +5 V 2: GND 75 80 12 Shield case B (2.5) (4 ×) ɸ3.2 45 APD Photosensitive surface ɸA BNC Connecter for signal output 11.6 19.6 6.2 16 21.6 (2 ×)M3 2.8 20 35 50 Tolerance unless otherwise noted: ±0.2 Type No. C12702-03 C12702-04 C12702-11 C12702-12 4.7 8.1 4.7 8.1 A ± ± ± ± 0.1 0.1 0.1 0.1 0.9 1.6 0.8 1.6 B ± ± ± ± 9 0.2 0.2 0.2 0.2 KACCA0324EA 4 APD modules C12702 series Accessories ∙ Power supply cable ∙ Instruction manual Option (sold separately) Attachment adapters for FC and SMA connectors APD module C12702-03 C12702-04 C12702-11 C12702-12 FC adapter A8407-18 A8407-05A A8407-18 A8407-05A SMA adapter A8424-18 A8424-05A A8424-18 A8424-05A Precaution (1) A high voltage power supply is used in this product. Do not remove insulating material potted on the board to prevent possible danger. (2) Be sure to terminate the output with 50 Ω when using this product. Related information www.hamamatsu.com/sp/ssd/doc_en.html Precautions ∙ Notice Information described in this material is current as of October, 2014. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39) 02-93581733, Fax: (39) 02-93581741 China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866 Cat. No. KACC1214E02 Oct. 2014 DN 5