EC centrifugal fan G1G170AB5380 backward-curved, single-intake with housing (large flange), Gas blower for condensing boilers ebm-papst Landshut GmbH Hofmark-Aich-Straße 25 D-84030 Landshut Phone +49 (0) 871 707-0 Fax +49 (0) 871 707-465 [email protected] www.ebmpapst.com Nominal data Type G1G170AB5380 Motor M1G074CF Phase 1~ Nominal voltage VAC 230 Frequency Hz 50/60 Method of obtaining data fa Speed (rpm) min-1 5830 Power consumption W 360 Current draw A 1.6 Min. ambient temperature °C -25 Max. ambient temperature °C 55 Min. temp. of flow medium °C -25 Max. temp. of flow medium °C +80 Air flow m3/h 645 Pressure increase Pa 0 Sound pressure level dB(A) 82 ml = Max. load · me = Max. efficiency · fa = Free air · cs = Customer specification · ce = Customer equipment Subject to change Data according to ErP Directive 01 Overall efficiency ηes % Actual Req. 2015 58.8 45 02 Measurement category A 03 Efficiency category Static 04 Efficiency grade N 74.8 05 Variable speed drive 61 Yes Data obtained at optimum efficiency level. The ErP data is determined using a motor-impeller combination in a standardized measurement setup. 09 Power consumption Ped kW 0.3 09 Air flow qv m³/h 285 09 Pressure increase pfs Pa 2000 10 Speed (rpm) n min-1 6220 11 Specific ratio* * Specific ratio = 1 + pfs / 100 000 Pa 1.02 LU-57509 Webdatenblatt · Seite 1 / 2 ebm-papst Landshut GmbH · Hofmark-Aich-Straße 25 · D-84030 Landshut · Phone +49 (0) 871 707-0 · Fax +49 (0) 871 707-465 · [email protected] · www.ebmpapst.com EC centrifugal fan G1G170AB5380 backward-curved, single-intake with housing (large flange), Gas blower for condensing boilers Technical description Weight 4.5 kg Fan size 170 mm Rotor surface Painted black Cover material Polyflam RPP 374-ND CS1 (UL 97-V0) Impeller material Sheet aluminum Housing material Die-cast aluminum Direction of rotation Clockwise, viewed toward rotor Degree of protection IP20 Insulation class "B" Cooling hole/opening On rotor side Motor bearing Ball bearing Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3.5 mA Electrical hookup With plug Motor protection Thermal overload protector (TOP) internally connected Approval UL 507; CCC; CSA C22.2 No. 113 Webdatenblatt · Seite 2 / 2 ebm-papst Landshut GmbH · Hofmark-Aich-Straße 25 · D-84030 Landshut · Phone +49 (0) 871 707-0 · Fax +49 (0) 871 707-465 · [email protected] · www.ebmpapst.com