Toggles UB2 Indicators Complement to UB2 Pushbuttons TYPICAL INDICATOR ORDERING EXAMPLE Pushbuttons Rockers UB2 01 Mounting Types Programmable Illuminated PB PCB Mounting 01 Square Cap Types & Colors Bright LED Sculptured Cap Lens/Diffuser Colors Red 5D Amber 5F Green Snap-in Mounting 04 LEDs 5C Square 01 4J W03 6CF K 1JB Clear/White 1JC Clear/Red 1JD Clear/Amber 1JF Clear/Green Beveled Cap & Colors Housing Keylocks K Black 2B White 2C Red 2D Amber 2F Green Flat Cap Lens/Diffuser Colors Rotaries Terminals Silver PC/Turret Slides W03 Tactiles Super Bright LED 6B White 6F Green 6G Blue 3JB Clear/White 3JC Clear/Red 3JD Clear/Amber 3JF Clear/Green Sculptured Cap Lens/Diffuser Color 1JB Clear/White Beveled Cap & Color 2B White Flat Cap Lens/Diffuser Color Tilt 3JB Super Bright Bicolor LED Touch 6CF Red/Green Sculptured Cap Lens/Diffuser Color 1JB Indicators Clear/White Beveled Cap & Color 2B DESCRIPTION FOR TYPICAL ORDERING EXAMPLE UB201KW036CF-4J01 M Red/Green Super Bright Bicolor LED Square with PCB Mounting M24 White Flat Cap Lens/Diffuser Color 3JB Clear/White Alternating Legends Sculptured Cap with Alternating Legend Sculptured Cap with ON– OFF Dual Legend Filter Supplement Accessories Clear/White 4J Black Housing Silver PC/ Turret Terminals www.nkk.com Clear Lens Flat Cap with Alternating Legend 5J Clear Lens 01 ON/OFF 02 START/STOP 04 OPEN/CLOSE Toggles UB2 Indicators Complement to UB2 Pushbuttons MOUNTING TYPES, SHAPES, & TERMINALS 01 Snap-in Mounting 04 Square Terminals W03 Square with Built-in Bezel Rockers PCB Mounting Silver PC/Turret Pushbuttons Programmable Illuminated PB (0.2) .008 (4.0) .157 (1.0) .039 Thk = (0.5) .020 Panel Thickness: .039 ~ .126” (1.0 ~ 3.2mm) Keylocks LED COLORS & SPECIFICATIONS The electrical specifications shown are determined at a basic temperature of 25°C. Polarity marks are on the bottom of the device. Rotaries If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. The LED is an integral part of the indicator and not available separately. Super Bright Slides ATTENTION Super Bright 5C 5D 5F 6B 6F 6G 6CF Color Red Amber Green White Green Blue Red/Green Unit Maximum Forward Current IFM 30 30 25 20 30 30 30/25 Amber 25/22 mA Typical Forward Current IF 20 20 20 15 20 20 20/20 mA Forward Voltage VF 1.85 2.0 2.1 3.3 3.5 3.6 2.1/3.5 V Maximum Reverse Voltage VRM 5 5 5 5 5 5 4/4 V Current Reduction Rate Above 25°C ∆IF 0.40 0.42 0.46 0.25 0.50 0.50 0.40/0.33 mA/°C –25° ~ +50 °C (+) (-) Super Bright Single Color LED with 1 element (+) (-) Super Bright Bicolor LED with 2 elements LC (+) L1 (-) Red L2 (-) Green Amber color can be achieved by lighting red and green simultaneously on the bicolor LED (not suitable for Alternating Legends). www.nkk.com M Indicators –20° ~ +50 Accessories Bright Single Color LED with 1 element –25° ~ +50 Supplement Ambient Temperature Range Touch Tilt ELECTROSTATIC SENSITIVE DEVICES Tactiles Bright Note for Super Bright: M25 Toggles UB2 Indicators Complement to UB2 Pushbuttons CAP TYPES & COLOR COMBINATIONS Rockers 1 AT3074 Scupltured Lens/Diffuser Colors Available: Pushbuttons (6.1) .240 Programmable Illuminated PB (15.0) Sq .591 Material: Polycarbonate Finish: Glossy JB Clear/ White JC Clear/ Red JD Clear/ Amber JF Clear/ Green AT3075 Beveled 2 Cap Colors Available: (5.6) .220 (15.0) Sq .591 Material: Polycarbonate Finish: Glossy 3 B White C Red D Amber F Green AT3076 Flat Lens/Diffuser Colors Available: (5.6) .220 (15.0) Sq .591 Material: Polycarbonate Finish: Glossy JB Clear/ White JC Clear/ Red JD Clear/ Amber JF Clear/ Green Alternating Legend Caps for Super Bright Bicolor LED 4J AT3069J Sculptured Cap with Alternating Legend Clear Lens Alternating Legend Filter (15.0) Sq .591 Material: Polycarbonate Finish: Glossy AT3070J Flat Cap with Alternating Legend E OESN OCLP (6.1) .240 NF OF Clear Lens Alternating Legend Filter Keylocks 5J (5.6) .220 (15.0) Sq .591 Material: Polycarbonate Finish: Glossy Rotaries Standard Alternating Legend Pairs Slides 01 ON 02 OFF Green Red 04 STOP START OPEN GreenRed CLOSE GreenRed Cap illumination is alternating green/red; legend text is black. Contact factory for other Alternating Legends. Tactiles Legend illustrations are approximate representations of the actual characters on the filters. Note: Cap Removal Tool available for PCB Mount. See AT093ABC in Accessories & Hardware section for dimensions and other details. TYPICAL INDICATOR DIMENSIONS Tilt PCB Mount L+ L+ N.C. Supplement (2.54) Typ .100 (0.5) Typ .020 (8.5) .335 (15.24) Sq .600 M (0.5) .020 (10.0) .394 (5.08) .200 N.O. COM L- L– (4.0) .157 (5.08) .200 (1.2) Dia Typ .047 (1.0) .039 UB201KW035C-1JC Snap-in Mount Accessories Indicators Touch (15.0) Sq .591 L+ N.C. (15.0) Sq .591 UB204KW035C-1JC M26 (2.54) Typ .100 (0.5) Typ .020 (19.0) Sq .748 (3.0) .118 (1.4) .055 (15.5) .610 www.nkk.com (4.0) .157 (5.08) .200 N.O. COM (17.4) Sq .685 L– (1.0) .039 Panel Thickness: .039 ~ .126” (1.0 ~ 3.2mm)