4820T

MATERIAL DECLARATION SHEET
Material
Model 4820T-L
Product Line
Resistor Network
Date
27-December-2005
RoHS Compliant
Yes
No.
1
2
3
4
Construction
Element
Element
Material
Group
Material
Weight [g]
Materials
Ceramic
Conductor
Ink
Glaze
0.12600
0.000019
0.000014
0.000036
0.000424
0.000331
0.000165
Alumina
Tantalum Nitride
Titanium
Palladium
Gold
Copper
Nickel
1344-28-1
12033-62-4
7440-32-6
7440-05-3
7440-57-5
7440-50-8
7440-02-0
30.64
0.46
Copper
Plating
0.01071
0.01646
0.00060
0.00009
Copper
Tin
Silver
Copper
7440-50-8
7440-31-5
7440-22-4
7440-50-8
2.61
4.00
0.15
0.02
Solder
0.00101
0.00893
0.00020
Tin
Lead
Silver
7440-31-5
7439-92-1
7440-22-4
0.25
2.17
0.05
Plastic
0.17150
0.04165
0.01715
0.00611
0.00980
0.416599
Silica, Vitreous
Epoxy Cresol Novalic Resin
Phenolic Resin
Antimony Oxide
TBBPA
60676-86-0
29690-82-2
9003-35-4
1309-64-4
79-94-7
41.70
10.12
4.17
1.49
2.38
CAS
If applicable
Average Mass
[%]
30.88
0.10
0.08
0.04
6.78
Terminal Pins
2.47
Termination
59.87
Body
Total Weight
Headquarters Riverside CA
Sum [%]
www.bourns.com
page 1 of 2
MATERIAL DECLARATION SHEET
Contact person
Cathy Godfrey
Bourns location
Riverside, CA
Phone
Ext. 5008
Bourns , Inc.
1200 Columbia Ave.
Riverside, CA 92507
USA
phone: 909 781-5690
fax:
909 781-5273
Fax
e-mail
[email protected]
Important Remarks:
1.
2.
3.
4.
Traces are product parts substances etc. that are below a percentage of 0.1% of total weight.
A list of the legally regulated substances or materials is available at internet address http://www.eicta.org/content.asp?pageID=113
Substances, materials etc. with possible harm to men and environment are listed.
There are no risks for human beings and to the environment if products are used properly as designated. This shall not apply to risks caused
during procedures for disposal etc.
5. All statements herein are based on our present knowledge.
Headquarters Riverside CA
www.bourns.com
page 2 of 2