TLHB5400 www.vishay.com Vishay Semiconductors High Efficiency Blue LED, Ø 5 mm Tinted Diffused Package FEATURES • GaN on SiC technology • Standard Ø 5 mm T-1¾ package • Small mechanical tolerances • Wide viewing angle • Very high intensity • Luminous intensity categorized 19223 • ESD class 1 • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION This device has been redesigned in 1998 replacing SiC by GaN technology to meet the increasing demand for high efficiency blue LEDs. APPLICATIONS It is housed in a 5 mm tinted diffused plastic package. • Status lights All packing units are categorized in luminous intensity groups. That allows users to assemble LEDs with uniform appearance. • Off/on indicator PRODUCT GROUP AND PACKAGE DATA • Maintenance lights • Product group: LED • Legend light • Background illumination • Readout lights • Package: 5 mm • Product series: standard • Angle of half intensity: ± 30° PARTS TABLE PART COLOR TLHB5400 LUMINOUS INTENSITY (mcd) MIN. TYP. MAX. 6.3 15 - Blue at IF (mA) 20 WAVELENGTH (nm) MIN. - TYP. MAX. 466 - at IF (mA) FORWARD VOLTAGE (V) MIN. TYP. MAX. - 3.9 4.5 10 at IF (mA) TECHNOLOGY 20 GaN on SiC ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) TLHB5400 PARAMETER TEST CONDITION SYMBOL VALUE VR 5 V Tamb 65 °C IF 20 mA tp 10 μs IFSM 0.1 A Tamb 65 °C PV 100 mW Reverse voltage DC forward current Surge forward current Power dissipation Junction temperature UNIT Tj 100 °C Operating temperature range Tamb - 40 to + 100 °C Storage temperature range Tstg - 40 to + 100 °C Tsd 260 °C RthJA 350 K/W Soldering temperature Thermal resistance junction/ambient Rev. 1.7, 29-Apr-13 t 5 s, 2 mm from body Document Number: 83019 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLHB5400 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLHB5400, BLUE TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) PARAMETER IF = 20 mA IV 6.3 15 - mcd Dominant wavelength IF = 10 mA d - 466 - nm Peak wavelength IF = 10 mA p - 428 - nm Angle of half intensity IF = 10 mA - ± 30 - deg Forward voltage IF = 20 mA VF - 3.9 4.5 V Reverse voltage IR = 10 μA VR 5 - - V Note (1) In one packing unit I Vmin./IVmax. 0.5 TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 100 50 IF - Forward Current (mA) IF - Forward Current (mA) 60 40 30 20 10 10 0 0 20 15900 40 60 80 1 100 0 Tamb - Ambient Temperature (°C) 10° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 80° 0.4 0.2 0 0.2 0.4 5 6 7 8 1.6 1.4 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement IF = 10 mA 1.2 1.0 0.8 0.6 0.4 0.2 0 - 10 0 10 20 30 40 50 60 70 80 90 100 0.6 95 10042 Rev. 1.7, 29-Apr-13 4 20° 30° 0.6 3 Fig. 3 - Forward Current vs. Forward Voltage IV rel - Relative Luminous Intensity IV rel - Relative Luminous Intensity 0° 2 VF - Forward Voltage (V) 15846 Fig. 1 - Forward Current vs. Ambient Temperature 1 15847 Tamb - Ambient Temperature (°C) Fig. 4 - Relative Luminous Flux vs. Ambient Temperature Document Number: 83019 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLHB5400 www.vishay.com Vishay Semiconductors IV rel - Relative Luminous Intensity (%) IV rel - Relative Luminous Intensity 10 1 0.1 0.01 1 IF = 10 mA 100 80 60 40 20 0 350 100 10 IF - Forward Current (mA) 15848 120 400 Fig. 5 - Relative Luminous Flux vs. Forward Current 450 500 550 600 λ - Wavelenght (nm) 15849 Fig. 6 - Relative Intensity vs. Wavelength PACKAGE DIMENSIONS in millimeters C R 2.49 (sphere) < 0.7 (4.7) 7.7 ± 0.15 8.7 ± 0.3 35.5 ± 0.55 12.5 ± 0.3 Ø 5.8 ± 0.15 A Area not plane 1.1 ± 0.25 1 min. Ø 5 ± 0.15 0.15 0.5 +- 0.05 + 0.15 0.5 - 0.05 technical drawings according to DIN specifications 2.54 nom. 6.544-5258.02-4 Issue: 7; 23.07.10 95 10916 Rev. 1.7, 29-Apr-13 Document Number: 83019 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000