TLHE4200 www.vishay.com Vishay Semiconductors High Intensity LED, Ø 3 mm Tinted Non-Diffused Package FEATURES • AlInGaP technology • Standard Ø 3 mm (T-1) package • Small mechanical tolerances • Suitable for DC and high peak current • Small viewing angle • Very high intensity 19222 • Luminous intensity color categorized DESCRIPTION • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 This device has been designed to meet the increasing demand for AlInGaP technology. It is housed in a 3 mm clear plastic package. The small viewing angle of these devices provides a high brightness. APPLICATIONS All packing units are categorized in luminous intensity and color groups. That allows users to assemble with uniform appearance. • Off / on indicator • Status lights • Background illumination • Readout lights PRODUCT GROUP AND PACKAGE DATA • Maintenance lights • Product group: LED • Legend light • Package: 3 mm • Product series: standard • Angle of half intensity: ± 22° PARTS TABLE PART TLHE4200 COLOR LUMINOUS INTENSITY (mcd) MIN. TYP. MAX. 40 120 - Yellow at IF (mA) 10 WAVELENGTH (nm) MIN. TYP. MAX. 581 588 594 at IF (mA) FORWARD VOLTAGE (V) MIN. TYP. MAX. - 1.9 2.6 10 at IF (mA) TECHNOLOGY 20 AlInGaP on GaAs ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) TLHE4200 PARAMETER TEST CONDITION SYMBOL VALUE VR 5 V Tamb ≤ 60 °C IF 30 mA tp ≤ 10 μs IFSM 0.1 A Tamb ≤ 60 °C PV 80 mW Reverse voltage DC forward current Surge forward current Power dissipation Junction temperature UNIT Tj 100 °C Operating temperature range Tamb -40 to +100 °C Storage temperature range Tstg -55 to +100 °C Tsd 260 °C RthJA 400 K/W Soldering temperature Thermal resistance junction/ambient Rev. 1.9, 14-Oct-14 t ≤ 5 s, 2 mm from body Document Number: 83104 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLHE4200 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLHE4200, YELLOW TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) PARAMETER IF = 10 mA IV 40 120 - mcd Dominant wavelength IF = 10 mA λd 581 588 594 nm Peak wavelength IF = 10 mA λp - 590 - nm Angle of half intensity IF = 10 mA ϕ - ± 22 - deg Forward voltage IF = 20 mA VF - 1.9 2.6 V Reverse voltage IR = 10 μA VR 5 - - V VR = 0 V, f = 1 MHz Cj - 15 - pF Junction capacitance Note (1) In one packing unit I Vmin./IVmax. ≤ 0.5 LUMINOUS INTENSITY CLASSIFICATION GROUP COLOR CLASSIFICATION YELLLOW LIGHT INTENSITY (mcd) STANDARD MIN. MAX. T 25 50 U 40 V 63 W 100 X 130 Y 180 Z DOM. WAVELENGTH (nm) MIN. MAX. 80 1 581 584 125 2 583 586 200 3 585 588 260 4 587 590 5 589 592 6 591 594 360 240 GROUP 480 Note • Luminous intensity is tested at a current pulse duration of 25 ms. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable. Note • Wavelengths are tested at a current pulse duration of 25 ms. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 0° 10° 20° 50 40 30 20 10 40° 1.0 0.9 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement 30° IV rel - Relative Luminous Intensity I F - Forward Current (mA) 60 80° 0 0 95 10894 20 40 60 80 Fig. 1 - Forward Current vs. Ambient Temperature for InGaN Rev. 1.9, 14-Oct-14 0.6 100 T amb - Ambient Temperature (°C) 0.4 0.2 0 95 10041 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Document Number: 83104 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLHE4200 www.vishay.com Vishay Semiconductors IV rel - Relative Luminous Intensity IF - Forward Current (mA) 100 10 1 1 1.5 2 2.5 0.01 1 10 100 IF - Forward Current (mA) Fig. 6 - Relative Luminous Intensity vs. Forward Current 1.6 1.2 1.4 IF = 20 mA IF = 20 mA 1.0 Irel - Relative Intensity IV rel - Relative Luminous Intensity 0.1 9611588 Fig. 3 - Forward Current vs. Forward Voltage 1.2 1.0 0.8 0.6 0.4 0.8 0.6 0.4 0.2 0.2 0.0 0 95 10880 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) Fig. 4 - Relative Luminous Intensity vs. Ambient Temperature Ispec - Specific Luminous Intensity 1 3 VF - Forward Voltage (V) 95 10878 10 0.0 550 95 10881 570 590 610 630 650 λ - Wavelength (nm) Fig. 7 - Relative Intensity vs. Wavelength 2.0 1.6 1.2 0.8 0.4 0.0 96 11589 1 2 5 1 0.5 0.2 10 20 0.1 0.05 50 IF (mA) 0.02 tp/T Fig. 5 - Change of Forward Voltage vs. Ambient Temperature Rev. 1.9, 14-Oct-14 Document Number: 83104 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLHE4200 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters C Ø 3.2 ± 0.15 A AREA NOT PLANE 5.8 ± 0.3 34.4 ± 0.5 < 0.6 (2.5) 3.4 ± 0.15 4.4 ± 0.3 R1.4 (sphere) Ø 2.9 ± 0.15 2.54 nom. 1.5 ± 0.5 + 0.15 + 0.2 0.5 - 0.1 0.4 - 0.05 technical drawings according to DIN specifications Drawing-No.: 6.544-5255.01-4 Issue: 9; 28.07.14 Rev. 1.9, 14-Oct-14 Document Number: 83104 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000