DATASHEET

EL5134, EL5135, EL5234, EL5235
®
Data Sheet
May 4, 2007
650MHz, Gain of 5, Low Noise Amplifiers
Features
The EL5134, EL5135, EL5234, and EL5235 are ultra-low
voltage noise, high speed voltage feedback amplifiers that
are ideal for applications requiring low voltage noise,
including communications and imaging. These devices offer
extremely low power consumption for exceptional noise
performance. Stable at gains as low as 5, these devices offer
100mA of drive performance. Not only do these devices find
perfect application in high gain applications, they maintain
their performance down to lower gain settings.
• 650MHz -3dB bandwidth
FN7383.4
• Av = +5 stable
• Ultra low noise 1.5nV/√Hz and 0.9pA/√Hz
• 450V/µs slew rate
• Low supply current = 6.7mA per amplifier
• Single supplies from 5V to 12V
• Dual supplies from ±2.5V to ±5V
These amplifiers are available in small package options
(SOT-23) as well as the MSOP and the industry-standard
SO packages. All parts are specified for operation over the
-40°C to +85°C temperature range.
• Fast disable on the EL5134 and EL5234
• Duals EL5234 and EL5235
• Low cost
• Pb-free plus anneal available (RoHS compliant)
Applications
• Imaging
• Instrumentation
• Communications devices
Ordering Information
PART NUMBER
PART MARKING
TAPE & REEL
PACKAGE
PKG. DWG. #
EL5134IS
5134IS
-
8 Ld SOIC (150 mil)
MDP0027
EL5134IS-T7
5134IS
7”
8 Ld SOIC (150 mil)
MDP0027
EL5134IS-T13
5134IS
13”
8 Ld SOIC (150 mil)
MDP0027
EL5134ISZ (Note)
5134ISZ
-
8 Ld SOIC (150 mil) (Pb-Free)
MDP0027
EL5134ISZ-T7 (Note)
5134ISZ
7”
8 Ld SOIC (150 mil) (Pb-Free)
MDP0027
EL5134ISZ-T13 (Note)
5134ISZ
13”
8 Ld SOIC (150 mil) (Pb-Free)
MDP0027
EL5135IW-T7
BDAA
7” (3k pcs)
5 Ld SOT-23
MDP0038
EL5135IW-T7A
BDAA
7” (250 pcs)
5 Ld SOT-23
MDP0038
EL5135IWZ-T7 (Note)
BTAA
7” (3k pcs)
5 Ld SOT-23 (Pb-Free)
MDP0038
EL5135IWZ-T7A (Note)
BTAA
7” (250 pcs)
5 Ld SOT-23 (Pb-Free)
MDP0038
EL5234IY
BWAAA
-
10 Ld MSOP (3.0mm)
MDP0043
EL5234IY-T7
BWAAA
7”
10 Ld MSOP (3.0mm)
MDP0043
EL5234IY-T13
BWAAA
13”
10 Ld MSOP (3.0mm)
MDP0043
EL5235IS
5235IS
-
8 Ld SOIC (150 mil)
MDP0027
EL5235IS-T7
5235IS
7”
8 Ld SOIC (150 mil)
MDP0027
EL5235IS-T13
5235IS
13”
8 Ld SOIC (150 mil)
MDP0027
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified
at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003-2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.
EL5134, EL5135, EL5234, EL5235
Pinouts
EL5135
(5 LD SOT-23)
TOP VIEW
EL5134
(8 LD SOIC)
TOP VIEW
NC 1
IN- 2
IN+ 3
+
VS- 4
8 CE
OUT 1
7 VS+
VS- 2
6 OUT
IN+ 3
INA+ 1
4 IN-
EL5235
(8 LD SOIC)
TOP VIEW
10 INA-
+
VS- 3
CEB 4
+ -
5 NC
EL5234
(10 LD MSOP)
TOP VIEW
CEA 2
5 VS+
+
-
OUTA 1
9 OUTA
INA- 2
8 VS+
INA+ 3
7 OUTB
VS- 4
8 VS+
7 OUTB
+
6 INB+
5 INB+
6 INB-
INB+ 5
2
FN7383.4
May 4, 2007
EL5134, EL5135, EL5234, EL5235
Absolute Maximum Ratings (TA = +25°C)
Thermal Information
Supply Voltage from VS+ to VS- . . . . . . . . . . . . . . . . . . . . . . . 13.2V
SR, Supply Rate of Supply Voltage Slew Rate . . . . . . . . . . . . 1V/µs
IIN-, IIN+, CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±5mA
Continuous Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . 100mA
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +125°C
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . .-40°C to +85°C
Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +125°C
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests
are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA
VS+ = +5V, VS- = -5V, Av=+5, RF = 100Ω, RG = 25Ω, RL = 500Ω,TA = +25°C, unless otherwise specified.
Electrical Specifications
PARAMETER
VOS
DESCRIPTION
CONDITIONS
MIN
TYP
MAX
UNIT
-1
0.2
1
mV
EL5234
0.3
±1.5
mV
-0.8
Offset Voltage
TCVOS
Offset Voltage Temperature Coefficient
Measured from TMIN to TMAX
IB
Input Bias Current
VIN = 0V
2.5
3.7
5.5
µA
IOS
Input Offset Current
VIN = 0V
-0.7
0.3
0.7
nA
TCIOS
Input Bias Current Temperature
Coefficient
Measured from TMIN to TMAX
PSRR
Power Supply Rejection Ratio
VS+ = 4.75V to 5.25V
CMRR
Common Mode Rejection Ratio
CMIR
µV/°C
-3
nA/°C
75
85
dB
VCM = ±3V
80
108
dB
Common Mode Input Range
Guaranteed by CMRR test
±3
±3.3
V
RIN
Input Resistance
Common mode
5
16
MΩ
CIN
Input Capacitance
1
pF
IS
Supply Current, per amplifier
AVOL
Open Loop Gain
VO
Voltage Swing
5.6
6.7
7.8
mA
RL = 1kΩ to GND
4.0
8.0
kV/V
RL = 1kΩ, RF = 900Ω, RG = 100Ω
±3.5
3.9
V
RL = 150Ω, RF = 900Ω, RG = 100Ω
±3.3
3.65
V
70
140
mA
ISC
Short Circuit Current
RL = 10Ω
BW-3dB
-3dB Bandwidth
AV = 5, RL = 1kΩ
650
MHz
BW-0.1dB
±0.1dB Bandwidth
AV = 5, RL = 1kΩ
40
MHz
GBWP
Gain Bandwidth Product
1500
MHz
PM
Phase Margin
RL = 1kΩ, CL = 6pF
55
°
SR
Slew Rate
VS = +5V, RL = 150Ω, VOUT = 0V to 3V
475
V/µs
tR
Rise Time
±0.1VSTEP
1.75
ns
tF
Fall Time
±0.1VSTEP
1.75
ns
OS
Overshoot
±0.1VSTEP
25
%
tS
0.01% Settling Time
14
ns
dG
Differential Gain
AV = 5, RF = 1kΩ
0.12
%
dP
Differential Phase
AV = 5, RF = 1kΩ
0.08
°
eN
Input Noise Voltage
f = 10kHz
1.5
nV/√Hz
iN
Input Noise Current
f = 10kHz
0.9
pA/√Hz
3
350
FN7383.4
May 4, 2007
EL5134, EL5135, EL5234, EL5235
VS+ = +5V, VS- = -5V, Av=+5, RF = 100Ω, RG = 25Ω, RL = 500Ω,TA = +25°C, unless otherwise specified.
Electrical Specifications
PARAMETER
DESCRIPTION
CONDITIONS
MIN
TYP
MAX
UNIT
0
+12
+25
µA
-25
-12
0
µA
SUPPLY (EL5134, EL5234)
ISOFF+
Supply Current - Disabled, per Amplifier
ISOFF-
Supply Current - Disabled, per Amplifier
No load, VIN = 0V
ENABLE (EL5134, EL5234)
IIHCE
CE Pin Input High Current
CE = +5V
1
10
+25
µA
IILCE
CE Pin Input Low Current
CE = 0V
-1
0
+1
µA
VIHCE
CE Input High Voltage for Power-down
VILCE
CE Input Low Voltage for Power-up
VS+ - 1
V
VS+ - 3
V
Applications Information
Typical Performance Curves
240
5
VS = ±5V
AV = +5
RG = 25Ω
RL = 500Ω
CL = 5pF
3
2
1
120
0
-1
-2
60
0
-60
-120
-3
-4
-180
-3dB BW @ 667MHz
-5
0.1
1
10
100
-240
0.1
1K
FIGURE 1. GAIN vs FREQUENCY
70
VS = ±5V
AV = +5
RG = 25Ω
RL = 500Ω
CL = 5pF
0.2
0.1
100
1K
VS = ±5V
RL = 500Ω
GAIN = 40dB or 100
FREQUENCY = 15.9MHz
GAIN BW PRODUCT = 15.9 x 100
= 1590MHz
60
0.1dB BW @ 40MHz
GAIN (dB)
0.3
10
FIGURE 2. PHASE vs FREQUENCY
0.5
0.4
1
FREQUENCY (MHz)
FREQUENCY (MHz)
NORMALIZED GAIN (dB)
VS = ±5V
AV = +5
RG = 25Ω
RL = 500Ω
CL = 5pF
180
PHASE (°)
NORMALIZED GAIN (dB)
4
0
-0.1
50
40
-0.2
30
-0.3
-0.4
-0.5
1
10
FREQUENCY (MHz)
FIGURE 3. 0.1dB BANDWIDTH
4
100
20
1
10
100
FREQUENCY (MHz)
FIGURE 4. GAIN BANDWIDTH PRODUCT
FN7383.4
May 4, 2007
EL5134, EL5135, EL5234, EL5235
1800
5
VS = ±5V
RL = 500Ω
4
1600
NORMALIZED GAIN (dB)
GAIN BANDWIDTH PRODUCT (MHz)
Typical Performance Curves (Continued)
1400
1200
1000
800
2.0
AV = +5
1
0
-1
-2
AV = +20
-3
2.5
3.0
3.5
4.0
4.5
5.0
SUPPLY VOLTAGES (±V)
5.5
-5
0.1
6.0
3
2
4
VS = ±6V
1
0
-1
VS = ±5V
-2
VS = ±4V
-3
VS = ±3V
-4
-5
0.1
10
100
FREQUENCY (MHz)
RL = 500Ω
1
0
-1
-2
RL = 150Ω
-3
RL = 100Ω
4
RL = 500Ω
1
0
RL = 1kΩ
-1
-2
RL = 150Ω
-3
RL = 100Ω
-4
-5
0.1
RL = 1kΩ
RL = 50Ω
1
10
100
FREQUENCY (MHz)
1K
5
VS = ±5V
AV = +10
RG = 25Ω
CL = 10pF
10
100
FREQUENCY (MHz)
1K
FIGURE 9. GAIN vs FREQUENCY FOR VARIOUS RLOAD
(AV = +10)
5
3
2
1
VS = ±5V
AV = +5
RG = 25Ω
RF = 100Ω
RL = 500Ω
CL = 18pF
CL = 12pF
CL = 8.2pF
0
-1
CL = 4.7pF
-2
-3
CL = 0pF
-4
RL = 50Ω
1
NORMALIZED GAIN (dB)
2
1K
FIGURE 8. GAIN vs FREQUENCY FOR VARIOUS RLOAD
5
3
2
-5
0.1
1K
FIGURE 7. GAIN vs FREQUENCY FOR VARIOUS ±VS
4
3
VS = ±5V
AV = +5
RL = 500Ω
CL = 5pF
-4
VS = ±2.5V
1
10
100
FREQUENCY (MHz)
5
AV = +5V
RG = 25Ω
RL = 500Ω
CL = 5pF
NORMALIZED GAIN (dB)
4
AV = +10
1
FIGURE 6. GAIN vs FREQUENCY FOR VARIOUS +AV
5
NORMALIZED GAIN (dB)
2
-4
FIGURE 5. GAIN BANDWIDTH PRODUCT vs SUPPLY
VOLTAGES
NORMALIZED GAIN (dB)
3
VS = ±5V
RG = 25Ω
RL = 500Ω
CL = 5pF
-5
0.1
1
10
100
FREQUENCY (MHz)
1K
FIGURE 10. GAIN vs FREQUENCY FOR VARIOUS CLOAD
(AV = +5)
FN7383.4
May 4, 2007
EL5134, EL5135, EL5234, EL5235
Typical Performance Curves (Continued)
3
2
1
VS = ±5V
AV = +10
RG = 25Ω
RF = 225Ω
RL = 500Ω
CL = 27pF
5
CL = 47pF
4
CL = 12pF
0
-1
-2
CL = 4.7pF
-3
0
-1
-2
-5
0.1
10
100
FREQUENCY (MHz)
1K
3
2
4
RF = 2.74kΩ
0
-1
-2
RF = 225Ω
-3
-4
-5
0.1
10
100
FREQUENCY (MHz)
1
CIN = 20pF
1
CIN = 4.7pF
0
-1
CIN = 2.7pF
-2
CIN = 0pF
-3
1
10
100
FREQUENCY (MHz)
CIN = 15pF
-1
CIN = 10pF
-2
-3
-4
CIN = 0pF
1
10
100
FREQUENCY (MHz)
1K
FIGURE 15. GAIN vs FREQUENCY FOR VARIOUS CIN(-)
(AV = +10)
6
1K
200
VS = ±5V
80
0
-5
0.1
2
FIGURE 14. GAIN vs FREQUENCY FOR VARIOUS CIN(-)
(AV = +5)
OPEN LOOP GAIN (dB)
2
VS = ±5V
AV = +20
RG = 25Ω
RL = 500Ω
CL = 10pF
1K
CIN = 8.2pF
90
5
3
3
VS = ±5V
AV = +5
RG = 25Ω
RL = 500Ω
CL = 5pF
-5
0.1
1K
FIGURE 13. GAIN vs FREQUENCY FOR VARIOUS RF
(AV = +10)
4
10
100
FREQUENCY (MHz)
-4
RF = 100Ω
1
1
5
RF = 4.53kΩ
RF = 909Ω
1
RF = 50Ω
FIGURE 12. GAIN vs FREQUENCY FOR VARIOUS RF
(AV = +5)
NORMALIZED GAIN (dB)
4
VS = ±5V
AV = +10
RL = 500Ω
CL = 10pF
RF = 100Ω
-3
-4
1
RF = 160Ω
RF = 400Ω
1
-5
0.1
5
NORMALIZED GAIN (dB)
2
-4
FIGURE 11. GAIN vs FREQUENCY FOR VARIOUS CLOAD
(AV = +10)
NORMALIZED GAIN (dB)
3
RF = 200Ω
VS = ±5V
AV = +5
RL = 500Ω
CL = 5pF
OPEN LOOP GAIN
70
180
160
60
140
50
120
40
100
30
20
80
60
OPEN LOOP PHASE
10
40
0
20
-10
0.001
0.01
0.1
1
10
FREQUENCY (MHz)
PHASE (°)
NORMALIZED GAIN (dB)
4
NORMALIZED GAIN (dB)
5
100
0
1K
FIGURE 16. OPEN LOOP GAIN and PHASE vs FREQUENCY
FN7383.4
May 4, 2007
EL5134, EL5135, EL5234, EL5235
Typical Performance Curves (Continued)
-10
VS = ±5V
-30
10
CMRR (dB)
OUTPUT IMPEDNACE (Ω)
100
1
-50
-70
0.1
-90
0.0
0.01
0.1
1
10
-110
1K
100
10K
100K
FREQUENCY (MHz)
PSRR (dB)
AV=+10
VS=±5V
-10
VS+
-30
VS-
-50
VS-70
VS+
100K
1M
10M
100M 500M
MAX OUTPUT VOLTAGE SWING (VP-P)
10
10K
10
VS = ±5V
AV = +5
RG = 25Ω
CL = 5pF
9
8
7
6
5
4
RLOAD = 150Ω
3
2
1
0
0.1
1.0
5
-40
VS = ±5V
AV = +5
RG = 25Ω
RL = 500Ω
-60
0
-5
-10
-15
-20
-25
-70
-80
INPUT TO OUTPUT
-90
OUTPUT TO INPUT
-100
-110
-120
-30
-130
-35
-40
0.1
1K
VS = ±5V
AV = +5
RG = 25Ω
CHIP DISABLED
-50
ISOLATION (dB)
GROUP DELAY (ns)
10
10
100
FREQUENCY (MHz)
FIGURE 20. MAX OUTPUT VOLTAGE SWING vs FREQUENCY
FIGURE 19. PSRR vs FREQUENCY
15
100M 500M
RLOAD = 1kΩ
FREQUENCY (Hz)
20
10M
FIGURE 18. CMRR vs FREQUENCY
FIGURE 17. OUTPUT IMPEDANCE vs FREQUENCY
-90
1K
1M
FREQUENCY (Hz)
1
10
100
FREQUENCY (MHz)
FIGURE 21. GROUP DELAY vs FREQUENCY
7
1K
-140
0.1
1.0
10
100
FREQUENCY (MHz)
1K
FIGURE 22. INPUT AND OUTPUT ISOLATION (EL5134, EL5234)
FN7383.4
May 4, 2007
EL5134, EL5135, EL5234, EL5235
Typical Performance Curves (Continued)
-40
-50
-60
VS = ±5V
AV = =5
RG = 25Ω
RL = 500Ω
CL = 5pF
VOUT = 2VP-P
-20
-40
T.H.D
2nd H.D
-70
-50
-70
-80
-90
Fin = 1MHz
-90
-100
0.1
1.0
10
FUNDAMENTAL FREQUENCY (MHz)
ENABLE SIGNAL
5
4
OUTPUT SIGNAL
3
2
4
0
3
-2
8
OUTPUT SIGNAL
0
100 200 300 400
TIME (ns)
TIME (ns)
FIGURE 25. TURN-ON TIME (EL5134, EL5234)
FIGURE 26. TURN-OFF TIME (EL5134, EL5234)
100
VS = ±5V
CURRENT NOISE (pA/√Hz)
VOLTAGE NOISE (nV/√Hz)
7
DISABLE SIGNAL
-3
-500 -400 -300 -200 -100
100 200 300 400 500 600 700 800
10
1
100
FIGURE 27. EQUIVALENT INPUT VOLTAGE NOISE vs
FREQUENCY
8
6
0
-2
1.0
10
FREQUENCY (kHz)
5
1
-1
0.10
4
2
-1
0.1
0.01
3
VS = ±5V
AV = +5
RG = 25Ω
RL = 500Ω
VOUT = 4VP-P
5
1
0
1
FIGURE 24. TOTAL HARMONIC DISTORTION vs OUTPUT
VOLTAGES
6
VS = ±5V
AV = +5
RG = 25Ω
RL = 500Ω
VOUT = 4VP-P
2
-3
-200 -100
0
OUTPUT VOLTAGES (VP-P)
AMPLITUDE (V)
6
-100
100
FIGURE 23. HARMONIC DISTORTION vs FREQUENCY
100
Fin = 10MHz
-60
3rd H.D
-80
AMPLITUDE (V)
VS = ±5V
AV = +5
RG = 25Ω
RL = 500Ω
CL = 5pF
-30
THD (dBc)
HARMONIC DISTORTION (dBc)
-30
1K
VS = ±5V
10
1
0.1
0.01
0.10
1.0
10
FREQUENCY (kHz)
100
1K
FIGURE 28. EQUIVALENT INPUT CURRENT NOISE vs
FREQUENCY
FN7383.4
May 4, 2007
EL5134, EL5135, EL5234, EL5235
Typical Performance Curves (Continued)
2
0.6
AMPLITUDE (V)
AMPLITUDE (V)
0.4
0.2
TFALL = 1.75 ns
0.0
TRISE = 1.75ns
-0.2
-0.4
-0.6
-20
0
20
40
VS = ±5V
AV = +5
RG = 25Ω
RL = 500Ω
CL = 5pF
VOUT = 500mV
AMPLITUDE (dBm)
-20
-30
SLEW RATE (V/µs)
600
6.6
6.4
3.0
3.5
4.0
4.5
5.0
SUPPLY VOLTAGES (V)
5.5
500
POSITIVE SLEW RATE
3.0
3.5
4.0
4.5
5.0
SUPPLY VOLTAGES (±V)
5.5
6.0
50
f2 = 4.3dBm
@ 1.05MHz
40
35
2f2-f1 = -66.3dBm
@ 1.15MHz
30
25
20
15
-90
5
1.0
1.1
1.2
FREQUENCY (MHz)
FIGURE 33. THIRD ORDER IMD INTERCEPT (IP3)
9
VS = ±5V
AV = +10
RF = 226Ω
RL = 100Ω
CL = 10pF
45
10
0.9
2.5
FIGURE 32. SLEW RATE vs SUPPLY VOLTAGES
-80
0.8
AV = +5
RG = 25Ω
RL = 500Ω
CL = 5pF
VOUT = 4VP-P
NEGATIVE SLEW RATE
Delta IM = (4.3) - (-69.4) = 73.7dB
IP3 = 4.3 + (73.7/2) = 41dBm
2f1-f2 = -69.4dBm
-60 @ 0.85MHz
-70
-100
60
80 100 120 140 160
TIME (ns)
400
200
2.0
6.0
@ 0.95MHz
f1 = 4.3dBm
-50
40
300
Please note that the curve showed positive current.
The negative current was almost the same.
VS = ±5V
AV = +10
RF = 226Ω
RL = 100Ω
CL = 10pF
-40
20
FIGURE 30. LARGE SIGNAL STEP RESPONSE_RISE AND
FALL TIME
IP3 (dBm)
SUPPLY CURRENT (mA)
6.8
FIGURE 31. SUPPLY CURRENT vs SUPPLY VOLTAGE
-10
0
700
AV = +5
RG = 25Ω
RL = 500Ω
CL = 5pF
6.0
2.5
0
VS = ±5V
AV = +5
RG = 25Ω
RL = 500Ω
CL = 5pF
VOUT = 2.0V
TRISE = 2.4ns
-2
-20
60
80 100 120 140 160
TIME (ns)
7.0
10
TFALL = 2.4ns
0
1
FIGURE 29. SMALL SIGNAL STEP RESPONSE_RISE AND
FALL TIME
6.2
1
0
1
10
100
FREQUENCY (MHz)
FIGURE 34. THIRD ORDER IMD INTERCEPT vs FREQUENCY
FN7383.4
May 4, 2007
EL5134, EL5135, EL5234, EL5235
Typical Performance Curves (Continued)
JEDEC JESD51-7 HIGH EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
JEDEC JESD51-3 LOW EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
1
0.9
1.2
1
909mW
0.8
870mW
0.6
SO8
θJA=110°C/W
435mW
MSOP8/10
θJA=115°C/W
0.4
SOT23-5/6
θJA=230°C/W
0.2
POWER DISSIPATION (W)
POWER DISSIPATION (W)
1.4
0.8
0.7 625mW
0.6
486mW
0.5
SO8
θJA=160°C/W
0.4
391mW
0.3
MSOP8/10
θJA=206°C/W
SOT23-5/6
θJA=265°C/W
0.2
0.1
0
0
0
25
75 85 100
50
125
0
150
FIGURE 35. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
DIFFERENTIAL GAIN (%)
25
50
75 85 100
125
150
AMBIENT TEMPERATURE (°C)
AMBIENT TEMPERATURE (°C)
FIGURE 36. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
0.15
0.10
0.05
0
-0.05
-0.10
-0.15
0
10
20
30
40
50
60
70
80
90
100
IRE
DIFFERENTIAL PHASE (°)
FIGURE 37. DIFFERENTIAL GAIN (%)
0.15
0.10
0.05
0
-0.05
-0.10
-0.15
-0.20
0
10
20
30
40
50
60
70
80
90
100
IRE
FIGURE 38. DIFFERENTIAL PHASE (°)
Product Description
The EL5134, EL5135, EL5234 and EL5235 are voltage
feedback operational amplifiers designed for communication
and imaging applications requiring very low voltage and
current noise. They also feature low distortion while drawing
moderately low supply current and is built on Intersil's
proprietary high-speed complementary bipolar process. The
EL5134, EL5135, EL5234 and EL5235 use a classical
voltage-feedback topology which allows them to be used in a
variety of applications where current-feedback amplifiers are
10
not appropriate because of restrictions placed upon the
feedback element used with the amplifier.
Gain-Bandwidth Product and the -3dB Bandwidth
The EL5134, EL5135, EL5234 and EL5235 have a gainbandwidth product of 1500MHz while using only 6.7mA of
supply current per amplifier. For gains greater than 5 their
closed-loop -3dB bandwidth is approximately equal to the
gain-bandwidth product divided by the noise gain of the
circuit. For gains of 5, higher-order poles in the amplifiers'
FN7383.4
May 4, 2007
EL5134, EL5135, EL5234, EL5235
transfer function contribute to even higher closed loop
bandwidths. For example, the EL5134, EL5135, EL5234 and
EL5235 have a -3dB bandwidth of 650MHz at a gain of 5,
dropping to 150MHz at a gain of 10. It is important to note
that the EL5134, EL5135, EL5234 and EL5235 is designed
so that this “extra” bandwidth in low-gain application does
not come at the expense of stability. As seen in the typical
performance curves, the EL5134, EL5135, EL5234 and
EL5235 in a gain of only 5 exhibited 0.2dB of peaking with a
500Ω load.
Output Drive Capability
The EL5134, EL5135, EL5234 and EL5235 are designed to
drive a low impedance load. They can easily drive 6VP-P
signal into a 500Ω load. This high output drive capability
makes the EL5134, EL5135, EL5234 and EL5235 and ideal
choice for RF, IF, and video applications. Furthermore, the
EL5134, EL5135, EL5234 and EL5235 are current-limited at
their outputs, allowing them to withstand momentary short to
ground. However, the power dissipation with output-shorted
cannot exceed the power dissipation capability of the
package.
Driving Cables and Capacitive Loads
Although the EL5134, EL5135, EL5234 and EL5235 are
designed to drive low impedance load, capacitive loads will
decreases the amplifiers’ phase margin. As shown in the
performance curves, capacitive load can result in peaking,
overshoot and possible oscillation. For optimum AC
performance, capacitive loads should be reduced as much
as possible or isolated with a series resistor between 5Ω to
20Ω. When driving coaxial cables, double termination is
always recommended for reflection-free performance. When
properly terminated, the capacitance of the coaxial cable will
not add to the capacitive load seen by the amplifier.
Disable/Power-Down
The EL5134 and EL5234 amplifiers can be disabled placing
their outputs in a high impedance state. When disable, each
amplifier current is reduced to 12uA. The EL5134 and
EL5234 are disabled when their CE pins are pulled up to
within 1V of the power suply. Similarly, the amplifiers are
enabled by floating or pulling its CE pin to at least 3V below
the positive supply. For +/-5V supply, this means that
EL5134 and EL5234 amplifiers will be enabled when CE is
2V or less, and disabled when CE is above 4V. Although the
logic levels are not stardard TTL, this choice of logic
voltages allows the EL5134 and EL5234 to be enabled by
typing CE to ground, even in 5V single supply applications.
The CE pin can be driveing from CMOS outputs.
Supply Voltage Range and Single-Supply
Operation
The EL5134, EL5135, EL5234 and EL5235 have been
designed to operate with supply voltages having a span of
greater than 5V and less than 12V. In practical terms, this
means that they will operate on dual supplies ranging from
11
±2.5V to ±6V. With single-supply, the EL5134, EL5135,
EL5234 and EL5235 will operate from 5V to 12V. To prevent
internal circuit latch-up, the slew rate between the negative
and positve supplies must be less than 1V/nS.
As supply voltages continue to decrease, it becomes
necessary to provide input and output voltage ranges that
can get as close as possible to the supply voltages. The
EL5134, EL5135, EL5234 and EL5235 have an input range
which extends to within 2V of either supply. So, for example,
on ±5V supplies, the EL5134, EL5135, EL5234 and EL5235
have an input range which spans ±3V. The output range of
the EL5134, EL5135, EL5234 and EL5235 is also quite
large, extending to within 2V of the supply rail. On a ±5V
supply, the output is therefore capable of swinging from
-3.1V to +3.1V. Single-supply output range is larger because
of the increased negative swing due to the external pulldown resistor to ground.
Power Dissipation
With the wide power supply range and large output drive
capability of the EL5134, EL5135, EL5234 and EL5235, it is
possible to exceed the 150°C maximum junction
temperatures under certain load and power-supply
conditions. It is therefore important to calculate the
maximum junction temperature (TJMAX) for all applications
to determine if power supply voltages, load conditions, or
package type need to be modified for the EL5134, EL5135,
EL5234 and EL5235 to remain in the safe operating area.
These parameters are related as follows:
T JMAX = T MAX + ( θ JA xPD MAXTOTAL )
where:
• PDMAXTOTAL is the sum of the maximum power
dissipation of each amplifier in the package (PDMAX)
• PDMAX for each amplifier can be calculated as follows:
V OUTMAX
PD MAX = 2*V S × I SMAX + ( V S - V OUTMAX ) × ---------------------------R
L
where:
• TMAX = Maximum ambient temperature
• θJA = Thermal resistance of the package
• PDMAX = Maximum power dissipation of 1 amplifier
• VS = Supply voltage
• IMAX = Maximum supply current of 1 amplifier
• VOUTMAX = Maximum output voltage swing of the
application
• RL = Load resistance
Power Supply Bypassing And Printed Circuit
Board Layout
As with any high frequency devices, good printed circuit
board layout is essential for optimum performance. Ground
FN7383.4
May 4, 2007
EL5134, EL5135, EL5234, EL5235
plane construction is highly recommended. Pin lengths
should be kept as short as possible. The power supply pins
must be closely bypassed to reduce the risk of oscillation.
The combination of a 4.7µF tantalum capacitor in parallel
with 0.1µF ceramic capacitor has been proven to work well
when placed at each supply pin. For single supply operation,
where pin 4 (VS-) is connected to the ground plane, a single
4.7µF tantalum capacitor in parallel with a 0.1µF ceramic
capacitor across pin 8 (VS+).
For good AC performance, parasitic capacitance should be
kept to a minimum. Ground plane construction again should
be used. Small chip resistors are recommended to minimize
series inductance. Use of sockets should be avoided since
they add parasitic inductance and capacitance which will
result in additional peaking and overshoot.
12
FN7383.4
May 4, 2007
EL5134, EL5135, EL5234, EL5235
Small Outline Package Family (SO)
A
D
h X 45°
(N/2)+1
N
A
PIN #1
I.D. MARK
E1
E
c
SEE DETAIL “X”
1
(N/2)
B
L1
0.010 M C A B
e
H
C
A2
GAUGE
PLANE
SEATING
PLANE
A1
0.004 C
0.010 M C A B
L
b
0.010
4° ±4°
DETAIL X
MDP0027
SMALL OUTLINE PACKAGE FAMILY (SO)
INCHES
SYMBOL
SO-14
SO16 (0.300”)
(SOL-16)
SO20
(SOL-20)
SO24
(SOL-24)
SO28
(SOL-28)
TOLERANCE
NOTES
A
0.068
0.068
0.068
0.104
0.104
0.104
0.104
MAX
-
A1
0.006
0.006
0.006
0.007
0.007
0.007
0.007
±0.003
-
A2
0.057
0.057
0.057
0.092
0.092
0.092
0.092
±0.002
-
b
0.017
0.017
0.017
0.017
0.017
0.017
0.017
±0.003
-
c
0.009
0.009
0.009
0.011
0.011
0.011
0.011
±0.001
-
D
0.193
0.341
0.390
0.406
0.504
0.606
0.704
±0.004
1, 3
E
0.236
0.236
0.236
0.406
0.406
0.406
0.406
±0.008
-
E1
0.154
0.154
0.154
0.295
0.295
0.295
0.295
±0.004
2, 3
e
0.050
0.050
0.050
0.050
0.050
0.050
0.050
Basic
-
L
0.025
0.025
0.025
0.030
0.030
0.030
0.030
±0.009
-
L1
0.041
0.041
0.041
0.056
0.056
0.056
0.056
Basic
-
h
0.013
0.013
0.013
0.020
0.020
0.020
0.020
Reference
-
16
20
24
28
Reference
-
N
SO-8
SO16
(0.150”)
8
14
16
Rev. M 2/07
NOTES:
1. Plastic or metal protrusions of 0.006” maximum per side are not included.
2. Plastic interlead protrusions of 0.010” maximum per side are not included.
3. Dimensions “D” and “E1” are measured at Datum Plane “H”.
4. Dimensioning and tolerancing per ASME Y14.5M-1994
13
FN7383.4
May 4, 2007
EL5134, EL5135, EL5234, EL5235
SOT-23 Package Family
MDP0038
e1
D
SOT-23 PACKAGE FAMILY
A
MILLIMETERS
6
N
SYMBOL
4
E1
2
E
3
0.15 C D
1
2X
2
3
0.20 C
5
2X
e
0.20 M C A-B D
B
b
NX
0.15 C A-B
1
3
SOT23-5
SOT23-6
A
1.45
1.45
MAX
A1
0.10
0.10
±0.05
A2
1.14
1.14
±0.15
b
0.40
0.40
±0.05
c
0.14
0.14
±0.06
D
2.90
2.90
Basic
E
2.80
2.80
Basic
E1
1.60
1.60
Basic
e
0.95
0.95
Basic
e1
1.90
1.90
Basic
L
0.45
0.45
±0.10
L1
0.60
0.60
Reference
N
5
6
Reference
D
2X
TOLERANCE
Rev. F 2/07
NOTES:
C
A2
2. Plastic interlead protrusions of 0.25mm maximum per side are not
included.
SEATING
PLANE
A1
0.10 C
1. Plastic or metal protrusions of 0.25mm maximum per side are not
included.
3. This dimension is measured at Datum Plane “H”.
4. Dimensioning and tolerancing per ASME Y14.5M-1994.
NX
5. Index area - Pin #1 I.D. will be located within the indicated zone
(SOT23-6 only).
(L1)
6. SOT23-5 version has no center lead (shown as a dashed line).
H
A
GAUGE
PLANE
c
L
14
0.25
0° +3°
-0°
FN7383.4
May 4, 2007
EL5134, EL5135, EL5234, EL5235
Mini SO Package Family (MSOP)
0.25 M C A B
D
MINI SO PACKAGE FAMILY
(N/2)+1
N
E
MDP0043
A
E1
MILLIMETERS
PIN #1
I.D.
1
B
(N/2)
e
H
C
SEATING
PLANE
0.10 C
N LEADS
SYMBOL
MSOP8
MSOP10
TOLERANCE
NOTES
A
1.10
1.10
Max.
-
A1
0.10
0.10
±0.05
-
A2
0.86
0.86
±0.09
-
b
0.33
0.23
+0.07/-0.08
-
c
0.18
0.18
±0.05
-
D
3.00
3.00
±0.10
1, 3
E
4.90
4.90
±0.15
-
E1
3.00
3.00
±0.10
2, 3
e
0.65
0.50
Basic
-
L
0.55
0.55
±0.15
-
L1
0.95
0.95
Basic
-
N
8
10
Reference
-
0.08 M C A B
b
Rev. D 2/07
NOTES:
1. Plastic or metal protrusions of 0.15mm maximum per side are not
included.
L1
2. Plastic interlead protrusions of 0.25mm maximum per side are
not included.
A
3. Dimensions “D” and “E1” are measured at Datum Plane “H”.
4. Dimensioning and tolerancing per ASME Y14.5M-1994.
c
SEE DETAIL "X"
A2
GAUGE
PLANE
L
A1
0.25
3° ±3°
DETAIL X
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
15
FN7383.4
May 4, 2007