HIGH VOLTAGE POWER SUPPLY SOCKET ASSEMBLY C13002 SERIES The C13002 series is a high voltage power supply socket assembly for head-on photomultiplier tubes (PMT), incorporating a regulated high voltage power supply and an active voltage divider. It enables simple yet stable PMT operations with extended DC output linearity by only supplying +15 V and connecting to a potentiometer or a 0 to +6 V for high voltage adjustment. FEATURES ●Superior DC output linearity ●Low power consumption ●Fast high voltage programming response ●Low ripple/noise SPECIFICATIONS Parameter Applicable photomultiplier tubes Input voltage Max. input voltage Max. input current A Linear DC output current of PMT BC Min. PMT Max. Anode ripple / noise D Output voltage range Specification guaranteed output voltage range Line regulation against ±1 V input voltage change B High voltage Output voltage control power Recommended output voltage control range supply Control voltage input impedance Output voltage programming response E Max. Typ. Temperature coefficient B Operating ambient temperature / humidity F Storage temperature / humidity F Typ. Weight C13002-02 C13002-01 Head-on type Head-on type R6231, R6232, R6233, R6234 R1306, R1307, etc. R6235, R6236, R6237, etc. +15 ± 1 +18 65 60 100 1 0 to -1500 -200 to -1500 ±0.01 Control voltage (0 to +6 V) or potentiometer (50 kΩ) +0.8 to +6 100 80 ±0.01 0 °C to +45 °C / Below 85 % -15 °C to +60 °C / Below 90 % 122 Unit — V V mA µA mV p-p V V % — V kΩ ms %/°C — — g NOTE: AWithout PMT BInput voltage = +15 V, control voltage = +4 V CWithin 2 % linearity DCable RG-174/U, cable length 450 mm, load resistance = 1 MΩ, load capacitance = 22 pF EFor 0 % to 99 % high voltage change FNo condensation Figure 1: Linearity characteristics 20 Figure 2: Practical PMT DC output limits TACCB0140EA 120 TACCB0141EA C13002-02 PMT OUTPUT CURRENT (µA) DEVIATION (%) PMT SUPPLY VOLTAGE: -1000 V 330 kΩ / STAGE RESISTIVE DIVIDER 10 C13002-01 C13002-02 0 100 80 C13002-01 60 40 20 -10 1 10 100 PMT OUTPUT CURRENT (µA) 1000 0 -200 -400 -600 -800 -1000 -1200 -1400 -1600 PMT SUPPLY VOLTAGE (V) * Photomultiplier tube must be used with a supply voltage within the rated range. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2016 Hamamatsu Photonics K.K. HIGH VOLTAGE POWER SUPPLY SOCKET ASSEMBLY C13002 SERIES Figure 3: High voltage controlling characteristics Figure 4: Schematic diagram TACCA0142EA -1750 OUTPUT VOLTAGE (V) -1500 ACTIVE VOLTAGE DIVIDER -1250 PMT SOCKET -1000 -750 1.8 kΩ Vref (+6 V) OUT (BLUE) HV CONTROL (WHITE) +15 V IN (RED) GND (BLACK) GND (BLACK) HIGH VOLTAGE POWER SUPPLY -500 100 kΩ -250 0 0 2 1 3 4 5 6 7 SIGNAL OUT (COAX) TACCC0173EA CONTROL VOLTAGE (V) Figure 5: Adjustment method of High voltage Figure 6: Dimensional outline (Unit: mm) VOLTAGE PROGRAMMING POWER SUPPLY SOCKET ASSEMBLY SIGNAL OUTPUT LOW VOLTAGE INPUT (RED) GND (BLACK) Vref OUTPUT (BLUE) HV CONTROL INPUT (WHITE) +15 V GND 64.0 ± 0.3 +0.8 V to +6 V 38.0 ± 0.5 GND RESISTANCE PROGRAMMING +15 V GND HOUSING (METAL) CW SIGNAL OUTPUT LOW VOLTAGE INPUT (RED) GND (BLACK) Vref OUTPUT (BLUE) HV CONTROL INPUT (WHITE) 450 MIN. POWER SUPPLY SOCKET ASSEMBLY 11 56 2 MAX. • Adjust the control voltage to adjust the sensitivity. • Electrically insulate the reference voltage output. MONITOR POTENTIOMETER (50 kΩ) 14 * When using a potentiometer to adjust sensitivity, monitor the control voltage so it does not exceed +6 V. TACCC0174EA SIGNAL OUTPUT +15 V INPUT GND HV CONTROL Vref OUTPUT GND COAXIAL CABLE RG-174/U AWG24, RED AWG24, BLACK AWG24, WHITE AWG24, BLUE AWG24, BLACK TACCA0342EA HAMAMATSU PHOTONICS K.K. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] TACC1066E01 Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93581733, Fax: (39)02-93581741 E-mail: [email protected] China: Hamamatsu Photonics (China) Co., Ltd.: B1201 Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: [email protected] FEB. 2016 IP