TLWR8600, TLWR8601, TLWY8600 www.vishay.com Vishay Semiconductors TELUX LED FEATURES • High luminous flux • Supreme heat dissipation: RthJP is 90 K/W • High operating temperature: Tamb = -40 °C to +110 °C • Meets SAE and ECE color requirements for the automobile industry for color red • Packed in tubes for automatic insertion • Luminous flux, forward voltage, and color categorized for each tube • Small mechanical tolerances allow precise usage of external reflectors or lightguides • Compatible with wave solder processes according to CECC 00802 and J-STD-020 • ESD-withstand voltage: up to 2 kV according to JESD22-A114-B • AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 19232 DESCRIPTION The TELUX series is a clear, non diffused LED for applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing highly developed AllnGaP technology. The supreme heat dissipation of TELUX allows applications at high ambient temperatures. All packing units are binned for luminous flux, forward voltage, and color to achieve the most homogenous light appearance in application. SAE and ECE color requirements for automobile application are available for color red. APPLICATIONS • • • • • PRODUCT GROUP AND PACKAGE DATA • • • • Product group: LED Package: TELUX Product series: power Angle of half intensity: ± 30° Exterior lighting Dashboard illumination Tail-, stop-, and turn signals of motor vehicles Replaces small incandescent lamps Traffic signals and signs PARTS TABLE PART LUMINOUS FLUX (mlm) COLOR MIN. TYP. MAX. at IF (mA) WAVELENGTH (nm) MIN. TYP. MAX. at IF (mA) FORWARD VOLTAGE (V) MIN. TYP. MAX. at IF (mA) TECHNOLOGY AlInGaP on GaAs TLWR8600 Red 2000 3700 - 70 611 616 634 70 1.83 2.2 2.67 70 TLWR8601 Red 3000 4000 6100 70 611 616 634 70 1.95 2.15 2.43 70 AlInGaP on GaAs TLWY8600 Yellow 2000 3200 - 70 585 591 597 70 1.83 2.1 2.67 70 AlInGaP on GaAs ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) TLWR8600, TLWR8601, TLWY8600 TEST CONDITION SYMBOL VALUE Reverse voltage (1) PARAMETER IR = 100 μA VR 10 V DC forward current Tamb ≤ 85 °C IF 70 mA tp ≤ 10 μs IFSM 1 A PV 187 mW Surge forward current Power dissipation UNIT Tj 125 °C Operating temperature range Tamb -40 to +110 °C Storage temperature range Tstg -55 to +110 °C t ≤ 5 s, 1.5 mm from body preheat temperature 100 °C / 30 s Tsd 260 °C With cathode heatsink of 70 mm2 RthJA 200 K/W RthJP 90 K/W Junction temperature Soldering temperature Thermal resistance junction / ambient Thermal resistance junction / pin Note (1) Driving the LED in reverse direction is suitable for a short term application Document Number: 83168 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.7, 07-Oct-15 TLWR8600, TLWR8601, TLWY8600 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLWR8600, TLWR8601, RED PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT TLWR8600 φV 2000 3700 - mlm TLWR8601 φV 3000 4000 6100 mlm 0.8 - mcd/mlm Total flux IF = 70 mA, RthJA = 200 K/W Luminous intensity/total flux IF = 70 mA, RthJA = 200 K/W IV/φV - Dominant wavelength IF = 70 mA, RthJA = 200 K/W λd 611 616 634 nm Peak wavelength IF = 70 mA, RthJA = 200 K/W λp - 624 - nm Angle of half intensity IF = 70 mA, RthJA = 200 K/W ϕ - ± 30 - deg Total included angle 90 % of total flux captured ϕ0.9 V - 75 - deg TLWR8600 VF 1.83 2.2 2.67 V TLWR8601 VF 1.95 2.15 2.43 V IR = 10 μA VR 10 20 - V VR = 0 V, f = 1 MHz Cj - 17 - pF IF = 70 mA, RthJA = 200 K/W Forward voltage Reverse voltage Junction capacitance OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLWY8600, YELLOW PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Total flux IF = 70 mA, RthJA = 200 K/W φV 2000 3200 - mlm Luminous intensity/total flux IF = 70 mA, RthJA = 200 K/W IV/φV - 0.8 - mcd/mlm Dominant wavelength IF = 70 mA, RthJA = 200 K/W λd 585 591 597 nm Peak wavelength IF = 70 mA, RthJA = 200 K/W λp - 594 - nm Angle of half intensity IF = 70 mA, RthJA = 200 K/W ϕ - ± 30 - deg 90 % of total flux captured ϕ0.9 V - 75 - deg Forward voltage IF = 70 mA, RthJA = 200 K/W VF 1.83 2.1 2.67 V Reverse voltage IR = 10 μA VR 10 15 - V VR = 0 V, f = 1 MHz Cj - 17 - pF Total included angle Junction capacitance LUMINOUS FLUX CLASSIFICATION GROUP LUMINOUS FLUX (mlm) STANDARD MIN. MAX. D 2000 3000 E 2500 3600 COLOR CLASSIFICATION DOM. WAVELENGTH (nm) GROUP YELLOW RED MIN. MAX. 0 585 588 MIN. MAX. F 3000 4200 1 587 591 611 618 G 3500 4800 2 589 594 614 622 H 4000 6100 3 592 597 616 634 I 5000 7300 K 6000 9700 L 7000 12 200 Note • Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of ± 1 nm. Note • Luminous flux is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each tube (there will be no mixing of two groups on each tube). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one tube. In order to ensure availability, single wavelength groups will not be orderable. Document Number: 83168 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.7, 07-Oct-15 TLWR8600, TLWR8601, TLWY8600 www.vishay.com Vishay Semiconductors FORWARD VOLTAGE CLASSIFICATION FORWARD VOLTAGE (V) GROUP MIN. MAX. Y 1.83 2.07 Z 1.95 2.19 0 2.07 2.31 1 2.19 2.43 2 2.31 2.55 3 2.43 2.67 Note • Voltages are tested at a current pulse duration of 1 ms. TLWR8600 D 2 1 Type Luminous Flux Color Group Forward Voltage 2.0 lm to 3.0 lm 2.19 V to 2.43 V 614 nm to 622 nm TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 0° 10° 20° 100 IF - Forward Current (mA) 80 60 40 RthJA = 200 K/W 20 40° 1.0 0.9 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement IV rel. - Relative Luminous Intensity 30° red, yellow 80° 0 20 40 60 80 100 IF - Forward Current (mA) red, yellow tp/T = 0.01 Tamb ≤ 85 °C 0.02 0.05 0.1 100 1 1 0.01 18020 0.2 0 Fig. 3 - Relative Luminous Intensity vs. Angular Displacement 1.2 10 000 10 0.4 16006 Fig. 1 - Forward Current vs. Ambient Temperature 1000 0.6 120 Tamb - Ambient Temperature (°C) 0.2 0.5 0.1 1 10 tp - Pulse Length (ms) Fig. 2 - Forward Current vs. Pulse Length 100 Irel. - Relative Luminous Intensity 0 18019 red 1.0 0.8 0.6 0.4 0.2 0.0 570 16007 590 610 630 650 670 λ- Wavelength (nm) Fig. 4 - Relative Intensity vs. Wavelength Document Number: 83168 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.7, 07-Oct-15 TLWR8600, TLWR8601, TLWY8600 www.vishay.com Vishay Semiconductors IV rel. - Relative Luminous Intensity 1.2 10 IV rel - Relative Luminous Intensity yellow 1.0 0.8 0.6 0.4 0.2 0 540 560 580 600 620 1 0.1 0.01 640 1 λ - Wavelength (nm) 16008 red 10 Fig. 5 - Relative Intensity vs. Wavelength 100 IF - Forward Current (mA) 15978 Fig. 8 - Relative Luminous Flux vs. Forward Current 100 10 I F - Forward Current (mA) 80 red 70 60 50 40 30 20 10 20176 yellow IV rel - Relative Luminous Intensity 90 0 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 V F - Forward Voltage (V) Fig. 6 - Forward Current vs. Forward Voltage 1 0.1 0.01 1 10 IF - Forward Current (mA) 15979 100 Fig. 9 - Relative Luminous Flux vs. Forward Current 100 yellow I Spec - Specific Luminous Flux IF - Forward Current (mA) 90 80 70 60 50 40 30 20 10 0 1.4 15975 red 1.0 0.1 1.6 1.8 2.0 2.2 VF - Forward Voltage (V) 1 2.4 Fig. 7 - Forward Current vs. Forward Voltage 18022 10 100 IF - Forward Current (mA) Fig. 10 - Specific Luminous Flux vs. Forward Current Document Number: 83168 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.7, 07-Oct-15 TLWR8600, TLWR8601, TLWY8600 www.vishay.com Vishay Semiconductors Padsize 8 mm2 per anode pin 220 yellow 1.0 210 RthJA (K/W) I Spec - Specific Luminous Flux 230 200 190 180 170 160 0.1 1 15981 10 100 0 100 150 200 Cathode Padsize I F - Forward Current (mA) Fig. 11 - Specific Luminous Flux vs. Forward Current 250 300 (mm2) Fig. 14 - Thermal Resistance Junction Ambient vs. Cathode Padsize 100 1.8 1.6 IF = 70 mA red Total Luminous Flux (%) Φ V rel - Relative Luminous Flux 50 16009 1.4 1.2 1.0 0.8 0.6 0.4 80 60 40 20 0.2 0.0 - 40 - 20 0 20 40 60 80 100 18021 Tamb - Ambient Temperature (°C) Fig. 12 - Relative Luminous Flux vs. Ambient Temperature 0 0 16005 25 50 75 100 125 Total Included Angle (Degrees) Fig. 15 - Percentage Total Luminous Flux vs. Total Included Angle for 90° Emission Angle Φ V rel - Relative Luminous Flux 2.0 yellow 1.8 IF = 70 mA 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 - 40 - 20 15977 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 13 - Relative Luminous Flux vs. Ambient Temperature Document Number: 83168 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.7, 07-Oct-15 TLWR8600, TLWR8601, TLWY8600 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters C Cathode marking technical drawings according to DIN specifications Area not plane A R1 1.6 2.65 ± 0.3 0.6 max. 1.32 4.65 ± 0.3 7.75 ± 0.3 1.45 R1.22 1.36 ± 0.1 5° 0.76 ± 0.1 0.4 ± 0.1 5.08 ± 0.3 1.55 ± 0.2 7.62 ± 0.3 6.55 5.08 ± 0.2 7.62 ± 0.3 Drawing-No.: 6.544-5321.02-4 Issue: 4; 25.07.14 Document Number: 83168 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.7, 07-Oct-15 TLWR8600, TLWR8601, TLWY8600 www.vishay.com Vishay Semiconductors FAN FOLD BOX DIMENSIONS in millimeters Label 600 45 16491 110 Label LABEL OF FAN FOLD BOX (example) A. Type of component 106 B. Manufacturing plant A C. SEL - selection code (bin): e.g.: A = code for luminous intensity group 4 = code for color group H VISHAY 37 D. Date code year / week A E. Day code (e.g. 4: Thursday, A: early shift) F. Batch: no. B C D E F 20228 G G. Total quantity H. Company code EXAMPLE FOR TELUX TUBE LABEL DIMENSIONS in millimeters 90 52 A TLWR7600 PTC27 B C SELB10 D DC20000121 BN12345 E F PCS70 MNO G H 8 16490 A. Bar code B. Type of component C. Manufacturing plant D. SEL - selection code (bin): digit 1 - code for luminous flux group digit 2 - code for dominant wavelength group digit 3 - code for forward voltage group E. Date code F. Batch: no. G. Total quantity H. Company code Document Number: 83168 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.7, 07-Oct-15 TLWR8600, TLWR8601, TLWY8600 www.vishay.com Vishay Semiconductors TUBE WITH BAR CODE LABEL DIMENSIONS in millimeters Drawing-No.: 9.700-5223.0-4 Rev. 2; Date: 23.08.99 20438 Drawing Proportions not Scaled Document Number: 83168 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.7, 07-Oct-15 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000