KBPC8 Series Vishay High Power Products Single Phase Rectifier Bridge, 8 A FEATURES • Suitable for printed circuit board or chasis mounting RoHS COMPLIANT • Compact construction • High surge current capability • Fully characterised data • Wide temperature range D-72 • RoHS compliant DESCRIPTION PRODUCT SUMMARY IO(av) 8.0 A VRRM 50 to 1000 V The KBPC series of single phase rectifier bridge consists of four silicon junctions connected as a full bridge. These device are intended for general use in industrial and consumer equipment. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IO IFSM I2 t VRRM CHARACTERISTICS VALUES TC = 50 °C, resistive load UNITS 8 TC = 50 °C, capacitive load 6.4 50 Hz 125 60 Hz 137 50 Hz 110 60 Hz 100 Range TJ A A A2 s 50 to 1000 V - 55 to 150 °C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS PART NUMBER VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V KBPC8005 50 80 KBPC801 100 150 KBPC802 200 300 KBPC804 400 500 KBPC806 600 700 KBPC808 800 900 KBPC810 1000 1100 Document Number: 93586 Revision: 29-Sep-08 For technical questions, contact: [email protected] www.vishay.com 1 KBPC8 Series Single Phase Rectifier Bridge, 8 A Vishay High Power Products FORWARD CONDUCTION PARAMETER SYMBOL Maximum DC output current IO TEST CONDITIONS TC = 50 °C, resistive or inductive load 8.0 TC = 50 °C, capacitive load 6.4 t = 10 ms, 20 ms Maximum peak one cycle, non-repetitive surge current VALUES IFSM t = 8.3 ms, 16.7 ms Following any rated load condition and with rated VRRM reapllied t = 10 ms t = 8.3 ms UNITS A 125 137 78 71 Initial TJ = TJ maximum 100 % VRRM reapplied Maximum I2t capability for fusing I2t t = 8.3 ms 1000 Maximum I2√t capability for fusing I2√t t = 0.1 to 10 ms, no voltage reapplied 1105 A2√s Maximum peak forward voltage per diode VFM IFM = 3.0 A, TJ = 25 °C 1.0 V TJ = 25 °C, 100 % VRRM 10 TJ = 150 °C, 100 % VRRM 100 Typical peak reverse leakage per diode t = 10 ms IRM Operating frequency range Maximum repetitive peak reverse voltage range A2 s 110 mA f 400 to 1000 Hz VRRM 50 to 1000 V THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL VALUES UNITS TJ, TStg - 55 to 150 °C RthJC 6 K/W 6 g 0.21 oz. Operating and storage temperature range Thermal resistance, junction to case Average Output Current (A) 10 9 KBPC8... 8 7 Resistive load 6 5 4 Capacitive load 3 2 1 0 0 20 40 60 80 100 120 Maximum Peak Surge Current (A) Approximate weight 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 140 160 KBPC8 50 Hz 0.1 0.01 1.0 Maximum Allowable Ambient Temperature (°C) Pulse Train Duration (s) Fig. 1 - Current Ratings Fig. 2 - Non-Repetitive Surge Ratings 10 LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com 2 http://www.vishay.com/doc?95250 For technical questions, contact: [email protected] Document Number: 93586 Revision: 29-Sep-08 Outline Dimensions www.vishay.com Vishay Semiconductors D-72 DIMENSIONS in millimeters (inches): KBPC6, KBPC8 15.75 (0.620) 14.75 (0.580) Ø 3.80 (Ø 0.150) 5.33 (0.210) 4.33 (0.170) ~ + 15.75 (0.620) 14.75 (0.580) 10.8 (0.425) 10.0 (0.394) ~ 25.4 (1.000) MIN. 10.8 (0.425) 10.0 (0.394) Ø 1.10 (Ø 0.043) Ø 0.90 (Ø 0.035) DIMENSIONS in millimeters (inches): KBPC1 15.7 (0.62) 16.7 (0.66) Ø 3.8 (Ø 0.15) Ø 4.2 (Ø 0.16) 5.5 (0.22) 6.5 (0.26) + ~ 15.7 (0.62) 16.7 (0.66) 10 (0.39) 11 (0.43) ~ 22 (0.87) MIN. 10 (0.39) 11 (0.43) Ø 0.7 (Ø 0.028) Ø 0.9 (Ø 0.035) Revision: 20-Jan-16 Document Number: 95250 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000