Bulletin U2790 09/05 KBPC6PbF SERIES KBPC8PbF SERIES 6A, 8A Single Phase Rectifier Bridge • Suitable for printed circuit board or chasis mounting • Compact construction • High surge current capability • Fully characterised data • Wide temperature range • Lead-Free ("PbF" suffix) + IO(av) ~ IO(av) = 6A, 8 A VRRM range - ~ 50 to 1000V Description The KBPC6PbF, KBPC8PbF Series of Single Phase Rectifier Bridges consists of four silicon junctions connected as a full bridge. These devices are intended for general use in industrial and consumer equipment. Electrical Specification KBPC6 KBPC8 Units Conditions IO IFSM Maximum DC output 6 8.0 A TC = 50oC, Resistive or inductive load current 4.7 6.4 A TC = 50oC, Capacitive load Maximum peak one cycle, non-repetitive 125 137 125 137 A A t = 10ms, 20ms t = 8.3ms, 16.7ms Maximum I2t capability 78 78 A2 s t = 10ms for fusing 71 71 A2 s t = 8.3ms 100% VRRM reapplied 110 110 A2 s t = 10ms Initial TJ = TJ max 100 100 A2 s t = 8.3ms no voltage reapplied 1105 1105 A2√s t = 0.1 to 10ms, no voltage reapplied 1.2 1.0 rated VRRM reapplied surge current I2 t I √t 2 Maximum I √t 2 Following any rated load condition and with Initial TJ = TJ max capability for fusing VFM Maximum peak forward voltage per diode IRM Typical peak reverse 10 10 µA TJ = 25oC, 100% VRRM leakage per diode 1.0 1.0 mA TJ = 150oC, 100% VRRM VRRM Maximum repetitive peak 50 to 1000 V IFM = 3.0A, TJ = 25oC V reverse voltage range Thermal and Mechanical Specifications TJ Operating and storage Tstg temperature range RthJC Thermal resistance, junctions to case W Approximate weight Document Number: 94360 KBPC6 KBPC8 Units Conditions -55 to 150 °C 6 K/W 6(0.21) g(oz) www.vishay.com 1 KBPC6PbF, KBPC8PbF SERIES Bulletin U2790 09/05 Voltage Ratings Part Number VRRM. Maximum repetitive peak reverse voltage VRSM. Maximum nonrepetitive peak reverse voltage V V 50 100 200 400 600 800 1000 80 150 300 500 700 900 1100 KBPC6,KBPC8005 KBPC6, KBPC801 KBPC6, KBPC802 KBPC6, KBPC804 KBPC6, KBPC806 KBPC6, KBPC808 KBPC6, KBPC810 10 Average Output Current - A 9 KBPC8... 8 Resistive Load 7 6 5 4 3 Capacitive Load 2 1 0 0 20 40 60 80 100 120 140 160 Maximum Allowable Ambient Temperature - oC Fig. 2 - Current Ratings (KBPC8PbF) Fig. 1 - Current Ratings (KBPC6PbF) 140 130 Maximum Peak Surge Current - A 120 110 100 90 80 70 60 50 40 30 20 10 0 10-2 10-1 1 10 Pulse Train Duration - s Fig. 2 - Non-Repetititive Surge Ratings (KBPC6PbF, KBPC8PbF) Document Number: 94360 www.vishay.com 2 KBPC6PbF, KBPC8PbF SERIES Bulletin U2790 09/05 Outline (D-72 package) 15.75(0.620) 14.75(0.580) 3.80(0.150) Dia. 5.33(0.210) 4.33(0.170) + 15.75(0.620) 14.75(0.580) 10.8(0.425) 10.0(0.394) 25.4(1.000) Min. 10.8(0.425) 10.0(0.394) 1.10(0.043) Dia. 0.90(0.035) All dimensions in millimetres(inches) Ordering Information Table Device Code KBPC 8 10 PbF 1 2 3 4 1 - Single Phase Rectifier Plastic Bridge 2 - Current Ratings 3 - Voltage Ratings (see Voltage Ratings table) 4 - Lead-Free 8 = 8A 6 = 6A Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 09/05 Document Number: 94360 www.vishay.com 3 Legal Disclaimer Notice Vishay Notice The products described herein were acquired by Vishay Intertechnology, Inc., as part of its acquisition of International Rectifier’s Power Control Systems (PCS) business, which closed in April 2007. Specifications of the products displayed herein are pending review by Vishay and are subject to the terms and conditions shown below. Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. International Rectifier®, IR®, the IR logo, HEXFET®, HEXSense®, HEXDIP®, DOL®, INTERO®, and POWIRTRAIN® are registered trademarks of International Rectifier Corporation in the U.S. and other countries. All other product names noted herein may be trademarks of their respective owners. Document Number: 99901 Revision: 12-Mar-07 www.vishay.com 1