Model 1325, 5230, 5406, 6546 Standard Banana Plug, Solderless and Stackable Standard Banana Vertical Stack-Up Jack Features • • • • • • Designed to fit on the end of any 22 AWG to 18 AWG wire. Cross hole wire entry fits wires up to .12” (3mm) diameter. Available with tarnish resistant nickel or gold plating for very low contact resistance. Model 5230 is rated to temperatures up to +302°F (+150°C). Set screw simplifies assembly of test leads and jumpers by using a flat blade screwdriver. Fits standard panel and binding post banana jacks .161” to .166” (4,0mm to 4,2mm) diameter. Materials Banana Jack: Banana Plug: Insulation: Set Screw: Beryllium Copper, Gold Plated Body – Brass, Nickel Plated (Model 5406 is Gold Plated) Spring – Beryllium Copper, Nickel Plated (Model 5406 Gold Plated) Polypropylene (Model 5230 is Polyphenylene Sulfide) Steel, Zinc Plated, 8-32 Single Slot Ratings Voltage: For CE compliance and for personal safety, do not hold in hand when voltages exceed 33 Vrms/70 Vdc. Maximum voltage for hands free use in controlled testing environments: 5000 Vrms Max. Do not use on circuits where transient stresses can exceed the rated voltage. Current: 15 Amps Maximum Operating Temperature: +122ºF (+50ºC) max. (Model 5230: +302ºF (+150ºC) max.) Ordering Information Model: 1325-color Nickel Plated Banana with Polypropylene Insulation Color: 0=Black, 1=Brown, 2=Red, 3=Orange, 4=Yellow, 5=Green, 6=Blue, 7=Violet, 8=Gray, 9=White, 02=set of Black and Red Ordering example: 1325-5 (1325 with Green Polypropylene Insulation) Model: Model: Model: Model: Model: Model: USA: 5406-0 Gold Plated Banana Plug with Polypropylene Black Insulation 5406-2 Gold Plated Banana Plug with Polypropylene Red Insulation 5230-0 Nickel Plated Banana with High Temperature Black Insulation (Polyphenylene Sulfide) 5230-6 Nickel Plated Banana with High Temperature Blue Insulation (Polyphenylene Sulfide) 6546 Package of ten 1325, one of each color. 4914 Replacement Set Screws, package of 100. Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2010 D1093603 Rev. 103 Page 1 of 1