LL4001G - LL4007G Taiwan Semiconductor Small Signal Product CREAT BY ART 1A, 50V - 1000V Surface Mount Glass Plassivated Silicon Rectifiers FEATURES - Plastic package has carries underwriters - Ideal for automated placement - Surge overload rating to 30 Amperes peak - Reliable low cost construction utilizing molded plastic technique results in in-expensive product - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC MELF MECHANICAL DATA Case: MELF Molding compound, UL flammability classification rating 94V-0 Mounting position: Any Polarity: Indicated by silver cathode band Weight: 0.12 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL LL40 LL40 LL40 LL40 LL40 LL40 LL40 01G 02G 03G 04G 05G 06G 07G 100 200 400 600 800 1000 UNIT Maximum repetitive peak reverse voltage VRRM 50 Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current IF(AV) 1 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A VF 1.1 V Maximum instantaneous forward voltage (Note 1) @1A Maximum reverse current @ rated VR TJ=25°C TJ=125°C Typical junction capacitance (Note 2) Typical thermal resistance Operating junction temperature range Storage temperature range IR 5 100 V μA CJ 15 pF RθJC 50 °C/W TJ - 65 to +150 °C TSTG - 65 to +150 °C Note 1: Pulse test with PW=300μs, 1% duty cycle Note 2: Measured at 1 MHz and Applied Reverse Voltage of 4.0V DC. Document Number: DS_S1407007 Version: E15 LL4001G - LL4007G Taiwan Semiconductor Small Signal Product CREAT BY ART RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) Fig. 2 Maximum Non-Repetitive Peak Forward Surge Current Fig.1 Forward Current Derating Curve 30 Peak Forward Surge Current(A) Average Forward Current(A) 1.2 1 0.8 0.6 0.4 Resistive or Inductive Load 0.2 8.3ms Single Half Sine Wave 25 20 15 10 5 0 0 0 25 50 75 100 125 1 150 10 Number of Cycles at 60Hz Terminal Temperature (°C) Fig. 4 Typical Reverse Characteristics Fig. 3 Instantaneous Forward Characteristics 1000 Instantaneous Reverse Current(μA) Instantaneous Forward Current(A) 10 1 0.1 Pulse Width = 300μs 1% Duty Cycle TJ = 150°C 100 10 TJ = 100°C 1 TJ = 25°C 0.1 0.01 0.01 0.4 0.6 0.8 1 1.2 1.4 0 1.6 20 40 60 80 100 Percentage of Peak Reverse Voltage(%) Instantaneous Forward Voltage(V) Fig. 6 Typical Transient Thermal Impedance Fig. 5 Typical Junction Capacitance 100 Transient Thermal Impedance(°C/W) 100 Junction Capacitance(pF) 100 10 f = 1,0MHZ Vsig=50mVP-P 1 0.1 1 10 Reverse Voltage(V) Document Number: DS_S1407007 100 10 1 0.1 0.01 0.1 1 10 100 t - Pulse Duration (sec.) Version: E15 LL4001G - LL4007G CREAT BY ART Taiwan Semiconductor Small Signal Product ORDERING INFORMATION PART NO. PACKING CODE PACKAGE PACKING LL400xG (Note 1) L0 MELF 5K / 13" Reel Note 1: "x" defines voltage from 50V (LL4001G) to 1000V (LL4007G) EXAMPLE PREFERRED P/N PART NO. PACKING CODE LL4007G L0 LL4007G L0 DESCRIPTION PACKAGE OUTLINE DIMENSIONS MELF Unit (mm) DIM. Unit (inch) Min Max Min Max A 4.80 5.50 0.189 0.217 B 2.25 2.67 0.089 0.105 C 0.30 0.60 0.012 0.024 ` SUGGEST PAD LAYOUT Unit (mm) Unit (inch) Typ. Typ. C 4.80 0.189 G 3.30 0.130 X 1.50 0.059 X1 6.30 0.248 Y 2.70 0.106 DIM. Document Number: DS_S1407007 Version: E15 LL4001G - LL4007G Taiwan Semiconductor Small Signal Product Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Document Number: DS_S1407007 Version: E15