LL4001G THRU LL4007G R Surface Mount Glass Passivated Rectifier Reverse Voltage - 50 to 1000 Volts Forward Current -1.0Ampere S E M I C O N D U C T O R FEATURES MiniMELF(DO-213AA) Plastic package has Underwriters Laboratory Flammability Classification 94V-0 JF Construction utilizes void-free molded plastic technique For surface mounted applications High temperature soldering guaranteed:260 °C/10 seconds at terminals Component in accordance to RoHs 2002/95/EC and WEEE 2002/96/EC SOLDERABLE ENDS 1st BAND D1= 0.067(1.7) 0.059(1.5) D2 MECHANICAL DATA 0.018(0.45) 0.010(0.25) 0.144(3.65) 0.136(3.45) Case: JEDEC Mini MELF(DO-213AA) molded plastic body Terminals: Solder Plated, solderable per MIL-STD-750,method 2026 D2=D1+0 -0.008(0.203) Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.0005ounce, 0.015 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave 60Hz,,resistive or inductive load. For capacitive load, derate by 20%.) Symbols Maximum DC Blocking Voltage VRRM VRMS VDC Maximum average Forward Rectified Current 0.375"(9.5mm) lead length at TA=75 C Peak Forward Surge Current (8.3ms half sinewave superimposed on rated load (JEDEC method) TA=75 C Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage LL 4001G LL 4002G LL 4003G LL 4004G LL 4005G LL 4006G LL 4007G 50 100 200 400 600 800 1000 35 70 140 280 420 560 700 50 100 200 400 600 800 1000 Units Volts Volts Volts I(AV) 1.0 Amp IFSM 25.0 Amps Maximum Instantaneous Forward Voltage at 1.0 A VF 1.1 Volts Maximum Reverse current at rated DC Blocking Voltage IR TA =25 C TA =125 C (Note 2) Typical Thermal resistance (Note 3) R R 5.0 A 50.0 JA JL Typical Junction Capacitance(Note 1) CJ Operating and Storage temperature Range TJ/TSTG 75 30 C/W 15 PF -65 to+175 C Note: 1.Measured at 1MHz and applied reverse voltage of 4.0V DC. 2.Thermal resistance from junction to ambient, 0.24 X 0.24" (6 X 6 mm) copper pads to each terminal 3.Thermal resistance from junction to terminal, 0.24 X 0.24" (6 X 6 mm) copper pads to each terminal JINAN JINGHENG ELECTRONICS CO., LTD. 2-1 HTTP://WWW.JINGHENGGROUP.COM SILICON RECTIFIER RATINGS AND CHARACTERISTIC CURVES LL4001G THRU LL4007G FIG.2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1.0 0.8 INSTANTANEOUS FORWARD CURRENT( AMPERES) AVERAGE FORWARD CURRENT (AMPERES) FIG.1-FORWARD CURRENT DERATING CURVE 0.6 0.4 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.2 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE ( C) 20 10 1 TJ=25 C PULSE WIDTH=300 S 1% DUTY CYCLE 0.1 0.01 FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 0.6 0.8 1.0 1.2 1.4 1.5 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 40 30 FIG.4-TYPICAL REVERSE CHARACTERISTICS 20 INSTANTANEOUS REVERSE CURRENT ( A) PEAK FORWARD SURGE CURRENT(AMPERES) 50 10 0 1 10 100 NUMBER OF CYCLES AT 60Hz FIG.5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE(pF) 100 10 TJ=100 C 1.0 0.1 TJ=25 C 0.01 0 20 40 60 80 100 120 TJ=25 C PERCENT OF RATED PEAK REVERSE VOLTAGE % 10 1 0.1 1 10 100 REVERSE VOLTAGE. (VOLTS) JINAN JINGHENG ELECTRONICS CO., LTD. 2-2 HTTP://WWW.JINGHENGGROUP.COM 140