MBRF16H45 Taiwan Semiconductor CREAT BY ART 16A, 45V Isolated Schottky Barrier Rectifier FEATURES - Low power loss, high efficiency - Guard ring for over-voltage protection - High surge current capability - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 1 2 MECHANICAL DATA ITO-220AC Case: ITO-220AC Molding compound: UL flammability classification rating 94V-0 Packing code with suffix "G" means green compound (halogen-free) Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 1A whisker test Polarity: As marked Mounting torque: 0.56 Nm max. Weight: 1.7 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL MBRF16H45 UNIT Maximum repetitive peak reverse voltage VRRM 45 V Maximum RMS voltage VRMS 31 V Maximum DC blocking voltage VDC 45 V Maximum average forward rectified current IF(AV) 16 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 275 A Peak repetitive reverse surge current (Note 1) IRRM 1.0 A VF 0.63 V Maximum instantaneous forward voltage (Note 2) IF= 16 A Maximum reverse current @ rated VR TJ=25°C TJ=125°C Typical thermal resistance Operating temperature range In DC forward mode Storage temperature range IR RθJC TJ TSTG 0.5 50 3.2 - 55 to +150 - 55 to +200 - 55 to +150 mA °C/W °C °C Note 1: tp = 2.0 μs, 1.0KHz Note 2: Pulse test with PW=300μs, 1% duty cycle Version: E1512 MBRF16H45 Taiwan Semiconductor CREAT BY ART ORDERING INFORMATION PART NO. PACKING CODE MBRF16H45 C0 PACKING CODE SUFFIX (*) G PACKAGE PACKING ITO-220AC 50 / Tube *: Optional available EXAMPLE EXAMPLE P/N PART NO. PACKING CODE MBRF16H45 C0G MBRF16H45 C0 PACKING CODE DESCRIPTION SUFFIX Green compound G RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) FIG. 2 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 20 16 12 8 Resistive or inductive load with heat sink 4 0 50 60 70 80 90 100 110 120 130 140 150 PEAK FORWARD SURGE CURRENT (A) AVERAGE FORWARD CURRENT (A) FIG.1 FORWARD CURRENT DERATING CURVE 300 250 8.3ms single half sine wave 200 150 100 50 0 1 10 FIG. 4 TYPICAL REVERSE CHARACTERISTICS FIG. 3 TYPICAL FORWARD CHARACTERISTICS 100 100 INSTANTANEOUS REVERSE CURRENT (mA) Pulse width=300μs 1% duty cycle INSTANTANEOUS FORWARD CURRENT (A) 100 NUMBER OF CYCLES AT 60 Hz CASE TEMPERATURE (oC) 10 1 10 TJ=125°C 1 0.1 TJ=25°C 0.01 0.1 0 0.1 0.2 0.3 0.4 0.5 FORWARD VOLTAGE (V) 0.6 0.7 0.8 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Version: E1512 MBRF16H45 Taiwan Semiconductor CREAT BY ART FIG. 5 TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE (pF) A 10000 f=1.0MHz Vsig=50mVp-p 1000 100 0.1 1 10 100 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS ITO-220AC DIM. Unit (mm) Unit (inch) Min Max Min Max A 4.30 4.70 0.169 0.185 B 2.50 3.10 0.098 0.122 C 2.30 2.90 0.091 0.114 D 0.46 0.76 0.018 0.030 E 6.30 6.90 0.248 0.272 F 9.60 10.30 0.378 0.406 G 3.00 3.40 0.118 0.134 H 0.00 1.60 0.000 0.063 I 0.95 1.45 0.037 0.057 J 0.50 0.90 0.020 0.035 K 2.40 3.20 0.094 0.126 L 14.80 15.50 0.583 0.610 M - 4.10 - 0.161 N - 1.80 - 0.071 O 12.60 13.80 0.496 0.543 P 4.95 5.20 0.195 0.205 MARKING DIAGRAM P/N = Specific Device Code G = Green Compound YWW = Date Code F = Factory Code Version: E1512 MBRF16H45 Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Version: E1512