MBR30H100CT Taiwan Semiconductor CREAT BY ART 30A, 100V Dual Common Cathode Schottky Rectifier FEATURES - Low power loss, high efficiency - Guardring for overvoltage protection - High surge current capability - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 MECHANICAL DATA Case: TO-220AB TO-220AB Molding compound, UL flammability classification rating 94V-0 Part no. with suffix "H" means AEC-Q101 qualified Packing code with suffix "G" means green compound (halogen-free) Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 2 whisker test Polarity: As marked Mounting torque: 5 in-lbs maximum Weight: 1.9 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL MBR30H100CT UNIT Maximum repetitive peak reverse voltage VRRM 100 V Maximum RMS voltage VRMS 70 V Maximum DC blocking voltage VDC 100 V Maximum average forward rectified current IF(AV) 30 A Peak repetitive forward current (Rated VR, square wave, 20KHz) IFRM 30 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 150 A Peak repetitive reverse surge current (Note 1) IRRM 1 A Maximum instantaneous forward voltage (Note 2) IF=15A, TJ=25°C IF=15A, TJ=125°C IF=30A, TJ=25°C IF=30A, TJ=125°C VF Maximum reverse current @ rated VR TJ=25 °C TJ=125 °C IR 10 2 Voltage rate of change (Rated VR) dV/dt 10000 V/μs Typical thermal resistance RθJC 2 °C/W TJ - 55 to +175 °C TSTG - 55 to +175 °C Operating junction temperature range Storage temperature range 0.85 0.75 0.98 0.85 V μA mA Note 1: tp = 2.0 μs, 1.0KHz Note 2: Pulse test with PW=300μs, 1% duty cycle Document Number: DS_D1308032 Version: J15 MBR30H100CT Taiwan Semiconductor CREAT BY ART ORDERING INFORMATION PART NO. PART NO. PACKING CODE SUFFIX C0 H MBR30H100CT PACKING CODE SUFFIX G (*) PACKAGE PACKING TO-220AB 50 / Tube *: Optional available EXAMPLE PREFERRED P/N PART NO. PART NO. SUFFIX MBR30H100CTHC0G MBR30H100CT PACKING CODE PACKING CODE H DESCRIPTION SUFFIX C0 AEC-Q101 qualified Green compound G RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) FIG. 2 MAXIMUM FORWARD SURGE CURRENT PER LEG AVERAGE FORWARD A CURRENT (A) 35 30 25 20 15 10 RESISTIVE OR INDUCTIVELOAD WITH HEATSINK 5 0 0 25 50 75 100 125 150 175 PEAK FORWARD SURGE CURRENT (A) FIG.1 FORWARD CURRENT DERATING CURVE 150 125 8.3ms Single Half Sine Wave 100 75 50 25 0 1 10 LEAD TEMPERATURE (oC) 100 NUMBER OF CYCLES AT 60 Hz FIG. 3 TYPICAL FORWARD CHARACTERISTICS PER LEG FIG. 4 TYPICAL REVERSE CHARACTERISTICS PER LEG 10000 100 REVERSE LEAKAGE CURRENT (μA) FORWARD CURRENT (A) TJ=150°C TJ=150°C 10 TJ=125°C 1 TJ=25°C 0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 FORWARD VOLTAGE (V) Document Number: DS_D1308032 0.8 0.9 1 1000 100 TJ=125°C 10 1 0.1 TJ=25°C 0.01 10 20 30 40 50 60 70 80 90 100 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Version: J15 MBR30H100CT Taiwan Semiconductor CREAT BY ART 100 TRANSIENT THERMAL IMPEDANCE (°C/W) 1000 JUNCTION CAPACITANCE (pF) A FIG. 6 TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG FIG. 5 TYPICAL JUNCTION CAPACITANCE PER LEG 100 f=1.0MHz Vsig=50mVp-p 10 0.1 1 10 100 10 1 0.1 0.01 0.1 REVERSE VOLTAGE (V) 1 10 100 T-PULSE DURATION(s) PACKAGE OUTLINE DIMENSIONS TO-220AB DIM. Unit (mm) Unit (inch) Min Max Min Max A - 10.50 - 0.413 B 2.62 3.44 0.103 0.135 C 2.80 4.20 0.110 0.165 D 0.68 0.94 0.027 0.037 E 3.54 4.00 0.139 0.157 F 14.60 16.00 0.575 0.630 G 13.19 14.79 0.519 0.582 H 2.41 2.67 0.095 0.105 I 4.42 4.76 0.174 0.187 J 1.14 1.40 0.045 0.055 K 5.84 6.86 0.230 0.270 L 2.20 2.80 0.087 0.110 M 0.35 0.64 0.014 0.025 MARKING DIAGRAM P/N = Specific Device Code G = Green Compound YWW = Date Code F = Factory Code Document Number: DS_D1308032 Version: J15 MBR30H100CT Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Document Number: DS_D1308032 Version: J15