ESH2B - ESH2D Taiwan Semiconductor CREAT BY ART 2A, 100V - 200V Surface Mount Ultra Fast Rectifiers FEATURES - Glass passivated junction chip - Ideal for automated placement - Low profile package - Ultra fast recovery time for high efficiency - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 definition MECHANICAL DATA DO-214AA (SMB) Case: DO-214AA (SMB) Molding compound, UL flammability classification rating 94V-0 Moisture sensitivity: level 1, per J-STD-020 Part No. with suffix "H" means AEC-Q101 qualified Packing code with suffix "G" means green compound (halogen-free) Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 2 whisker test Polarity: Indicated by cathode band Weight: 0.09 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL ESH2B ESH2C ESH2D UNIT Maximum repetitive peak reverse voltage VRRM 100 150 200 V Maximum RMS voltage VRMS 70 105 140 V Maximum DC blocking voltage VDC 100 150 200 V Maximum average forward rectified current IF(AV) 2 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 60 A VF 0.90 V Maximum instantaneous forward voltage (Note 1) @2A Maximum reverse current @ rated VR TJ=25°C TJ=125°C IR 2 50 μA Maximum reverse recovery time (Note 2) trr 20 ns Typical junction capacitance (Note 3) CJ 25 pF RθJL RθJA 20 75 °C/W TJ - 55 to +175 °C TSTG - 55 to +175 °C Typical thermal resistance Operating junction temperature range Storage temperature range Note 1: Pulse test with PW=300μs, 1% duty cycle Note 2: Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Note 3: Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Document Number: DS_D1407025 Version: G15 ESH2B - ESH2D Taiwan Semiconductor ORDERING INFORMATION PART NO. PART NO. PACKING CODE PACKING CODE SUFFIX PACKAGE PACKING SMB 850 / 7" Plastic reel SMB 3,000 / 13" Paper reel SMB 3,000 / 13" Plastic reel SUFFIX R5 ESH2x (Note 1) H R4 G M4 Note 1: "x" defines voltage from 100V (ESH2B) to 200V (ESH2D) EXAMPLE PREFERRED PART NO. PART NO. ESH2DHR5G PART NO. PACKING CODE SUFFIX ESH2D H PACKING CODE DESCRIPTION SUFFIX R5 AEC-Q101 qualified Green compound G RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) 3 2.5 2 1.5 1 RESISTER OR INDUCTIVE LOAD 0.5 0 0 25 50 75 100 125 150 175 TJ=125°C 10 1 0.1 TJ=25°C 0.01 0 LEAD TEMPERATURE (oC) 40 30 20 8.3ms Single Half Sine Wave 0 NUMBER OF CYCLES AT 60 Hz Document Number: DS_D1407025 100 INSTANTANEOUS FORWARD CURRENT (A) PEAK FORWARD SURGE CURRENT (A) 50 10 40 60 80 100 120 140 FIG. 4 TYPICAL FORWARD CHARACTERISTICS 100 60 1 20 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 10 FIG. 2 TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT (μA) AVERAGE FORWARD CURRENT (A) FIG.1 FORWARD CURRENT DERATING CURVE 10 1 Pulse Width=300μs 1% Duty Cycle 0.1 0.4 0.6 0.8 1 1.2 1.4 FORWARD VOLTAGE (V) 1.6 1.8 Version: G15 ESH2B - ESH2D Taiwan Semiconductor FIG. 5 TYPICAL JUNCTION CAPACITANCE 60 CAPACITANCE (pF) 50 40 30 20 f=1.0MHz Vsig=50mVp-p 10 0 0.1 1 10 100 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS DO-214AA (SMB) Unit (mm) DIM. Unit (inch) Min Max Min Max A 1.95 2.10 0.077 0.083 B 4.25 4.75 0.167 0.187 C 3.48 3.73 0.137 0.147 D 1.99 2.61 0.078 0.103 E 0.90 1.41 0.035 0.056 F 5.10 5.30 0.201 0.209 G 0.10 0.20 0.004 0.008 H 0.15 0.31 0.006 0.012 SUGGESTED PAD LAYOUT Symbol Unit (mm) Unit (inch) A 2.3 0.091 B 2.5 0.098 C 4.3 0.169 D 1.8 0.071 E 6.8 0.268 MARKING DIAGRAM P/N = Specific Device Code G = Green Compound YW = Date Code F = Factory Code Document Number: DS_D1407025 Version: G15 ESH2B - ESH2D Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Document Number: DS_D1407025 Version: G15