MBS6-K - MBS10-K Taiwan Semiconductor CREAT BY ART 0.8A, 600V - 1000V Glass Passivated Bridge Rectifiers FEATURES - Ideal for automated placement - Reliable low cost construction utilizing molded plastic technique - High surge current capability - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 MBS MECHANICAL DATA Case: Molded plastic body Molding compound: UL flammability classification rating 94V-0 Moisture sensitivity level: level 1, per J-STD-020 Packing code with suffix "G" means green compound (halogen-free) Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 1A whisker test Polarity: Polarity as marked on the body Weight: 0.12 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL Marking code MBS6-K MBS8-K MBS10-K MBS6 MBS8 MBS10 UNIT Maximum repetitive peak reverse voltage VRRM 600 800 1000 V Maximum RMS voltage VRMS 420 560 700 V Maximum DC blocking voltage VDC 600 800 1000 V Maximum average forward rectified current On glass-epoxy P.C.B. On aluminum substrate IF(AV) 0.5 0.8 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 35 A Rating for fusing (t<8.3ms) I2t 5.08 A2s Maximum instantaneous forward voltage (Note 1) IF= 0.4 A VF 1.0 V Maximum DC reverse current at rated DC blocking voltage IR 5 100 μA CJ 13 pF RθJL RθJA 20 85 °C/W TJ - 55 to +150 °C TSTG - 55 to +150 °C TJ=25 °C TJ=125 °C Typical junction capacitance Per Leg (Note 2) Typical thermal resistance Operating junction temperature range Storage temperature range Note 1: Pulse test with PW=300μs,1% duty cycle Note 2: Measure at 1.0MHz and applied reverse voltage of 4.0 V Version: C1602 MBS6-K - MBS10-K Taiwan Semiconductor ORDERING INFORMATION PART NO. PACKING CODE MBSx-K (Note 1, 2) RC PACKING CODE SUFFIX PACKAGE PACKING MBS 3,000 / 13" Paper reel G Note 1: "x" defines voltage from 600V (MBS6-K) to 1000V (MBS10-K) Note 2: Whole series with green compound EXAMPLE EXAMPLE P/N PART NO. PACKING CODE MBS10-K RC MBS10-K RC PACKING CODE DESCRIPTION SUFFIX Green compound G RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) FIG.1 MAXIMUM FORWARD CURRENT DERATING CURVE FIG. 2 TYPICAL REVERSE CHARACTERISTICS 100 Resistive or inductive load with heat sink 0.8 Aluminum Substrate 0.6 0.4 0.2 Glass Epoxy P.C.B. 0 0 20 40 60 80 100 AMBIENT TEMPERATURE 120 140 160 INSTANTANEOUS REVERSE CURRENT (μA) AVERAGE FORWARD CURRENT (A) 1 10 TJ=125°C 1 0.1 TJ=25°C 0.01 0 FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 40 60 80 100 FIG. 4 TYPICAL FORWARD CHARACTERISTICS 10 Single half sine-wave 30 25 F=60Hz 20 15 F=50Hz 10 5 0 1 10 NUMBER OF CYCLES AT 60 Hz 100 INSTANTANEOUS FORWARD CURRENT (A) 35 PEAK FORWARD SURGE CURRENT (A) 20 PERCENT OF RATED PEAK REVERSE VOLYAGE(%) (°C) 1 0.1 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 FORWARD VOLTAGE (V) Version: C1602 MBS6-K - MBS10-K Taiwan Semiconductor FIG. 5 TYPICAL JUNCTION CAPACITANCE CAPACITANCE (pF) a 30 25 20 15 f=1.0MHz Vslg=50mVp-p 10 5 0 0.1 1 10 100 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS MBS Unit (mm) DIM. Unit (inch) Min Max Min Max A 4.50 4.90 0.177 0.193 B 0.56 0.84 0.022 0.033 C 3.60 5.00 0.142 0.197 D - 6.90 - 0.272 E 2.20 2.60 0.087 0.102 F 2.30 2.70 0.091 0.106 G - 0.20 - 0.008 H - 2.90 - 0.114 I 0.95 1.53 0.037 0.060 J 0.70 1.10 0.028 0.043 K 0.15 0.35 0.006 0.014 L 1.10 2.12 0.043 0.083 SUGGESTED PAD LAYOUT Symbol Unit (mm) Unit (inch) A 1.7 0.067 B 0.9 0.035 C 4.4 0.173 D 8.1 0.319 E 1.3 0.051 F 6.3 0.248 MARKING DIAGRAM P/N = Marking Code YW = Date Code F = Factory Code Version: C1602 MBS6-K - MBS10-K Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Version: C1602