Cobra Sight™ Laser Aiming Device for Explosive Ordnance Disposal (EOD) Robots The Cobra Sight™ Laser Aiming Device is an inventive new tactical device which utilizes true boresight technology. With this aiming device, the end of the barrel remains uncovered, making zeroing in both fast and simple. Two line lasers project a true crosshair on the target for ranges greater than 7 inches without adjustment. The Cobra Sight™ Laser aiming system enables people to act quicker, as the aiming device makes zeroing in faster. With a more accurate aim, less misfires and mistakes will occur because of shot placement issues and more precise shot is guaranteed. Cobra Sight™ Key Benefits • Compatible with all 12-gauge PAN™ Disrupters • Robot-Mount Version: 12 V/200mA • No removal required before a shot is taken • Factory-calibrated, but also user-adjustable • Minimum Standoff Distance: 7 inches • True boresight technology • Class 3R Device (two class 3A lasers) • PAN™ Stand Version: 2 AA Batteries Features Two line lasers intersect to produce a true crosshair Sealed enclosure for environmental and shock resistance; ON / OFF controlled by robot’s own laser switch or by external switch (PAN Stand Version). Factory-calibrated, but also useradjustable The Cobra Sight™ Laser Aiming Device can also be used in conjunction with the Hawk-iTM Video Aiming Device. Hawk-i™ Video Aiming Device The Hawk-i™ Video Aiming Device utilizes a camera and a rangefinder to automatically place crosshairs on your monitor. While approaching a target, the crosshairs shift based on your range to the target to show operators the true point of impact for their shot. No calibration is required and no adjustments are needed by the operator to account for the range to the target. The system also displays range to target in the upper left corner of the video image. The Hawk-i™ Video Aiming Device promotes a more accurate shot. To learn more about the API Technologies’ Power & Systems Solutions, including Explosive Ordnance Disposal (EOD) Robotic Subsystems, the Hawk-i™ Video Aiming Device or Cobra Sight™ Laser Aiming Device, please contact +1 (888) 588-3448 or email [email protected] System P/N(s) Description Component P/N B01055-D00 B00279-D00 Cobra Sight for Teodor Cobra Sight for PANstand Dimensions (inches) CEU 1.2 5.5 x 3.25 x 1.75 B00005-D00 Laser Module 0.4 3.25 x 2.25 x 1.75, attached cable 18 long (includes all set screws) CEU Cable 0.2 18 long Mounting bracket 0.4 5.48 x 3.00 x 0.25 B00276-A00 Cobra Sight for F6A Weight (lbs) B00006-D00 72-1031-24085 B00895-D00 Component Description B00659-D03 Hardware Kit 0.1 four (4) x 10-32 3/8" Phillips screws (CEU to mounting plate) two (2) x 10-24 1/2” Phillips screws (mounting plate to robot) two (2) x 8-32 1/2” Phillips screws (mounting plate to robot)\ 5/64” short-arm hex L-key 2” long (for set screws) B00895-D00_ IOM Install/Operation Manual 0.2 13 pages 8.5 x 11 B00274-D00 Carry Case 2.8 17.5 x 12.5 x 4.5 Total Weight of System: 5.3 B00006-D00 CEU 1.2 5.5 x 3.25 x 1.75 B00005-D00 Laser Module 0.4 3.25 x 2.25 x 1.75, attached cable 18 long (includes all set screws) 72-1031-24086 CEU Cable 0.2 18 long 23-6416-0141 Mounting bracket 0.3 5.48 x 3.00 x 0.25 B00659-D04 Hardware Kit 0.1 6-32 3/16" Phillips screws (CEU to mounting plate) 5/64” short-arm hex L-key 2” long (for set screws) B01055-D00_ IOM Install/Operation Manual 0.2 13 pages 8.5 x 11 B00274-D00 Carry Case 2.8 17.5 x 12.5 x 4.5 Total Weight of System: 5.2 B00081-D00 Battery Box w/ Mounting Plate 0.9 5.13 x 2.82 x 2.75 (includes 2 x AA batteries) B00005-D00 Laser Module 0.4 3.25 x 2.25 x 1.75, attached cable 18 long (includes all set screws) B00276-A00 Mounting bracket 0.4 5.48 x 3.00 x 0.25 B00279-D00_ IOM Install/Operation Manual 0.2 10 pages 8.5 x 11 B00274-D00 Carry Case 2.8 17.5 x 12.5 x 4.5 Total Weight of System: 4.7 Rev: 09/18/14 +1 888.588.3448 [email protected] power.apitech.com www.apitech.com