Hawk-i™ Video Aiming Device for Explosive Ordnance Disposal (EOD) Robots Take the guesswork out of aiming your PAN™ disrupters. The Hawk-i™ Video Aiming Device utilizes a camera and a rangefinder to automatically place crosshairs on your monitor. As you approach a target the crosshairs shift based on your range to the target to show operators the true point of impact for their shot. No calibration is required and no adjustments are needed by the operator to account for the range to the target. The system also displays range to target in the upper left corner of the video image. This camera sighting system is designed to work from a robot and will mount onto the barrel of the disrupter. Versions are available for several popular EOD robots, and the system can be configured for other robotic platforms, contact sales. The camera projects crosshairs on the target and they are seen on the robot’s monitor. This way you can mount the camera to one barrel and be able to see the crosshairs for each barrel. The Hawk-i rangefinder will measure the distance from the end of the barrel to the target that will display in the upper left corner of your monitor. The rangefinder is good up to 48 inches. The camera can project two sets of crosshairs if you have a dual mount. The crosshairs are overlaid on the video image and then sent back to the robot control station through the robot’s accessories port or weapons port. While approaching a target, the crosshairs shift based on your range to the target to show operators the true point of impact for their shot. It takes less than 5 minutes to integrate the aiming system to the robotic platform. Tilt (Angle of Fire): An additional capability to the Hawk-i video sighting system that can be enabled as an option at the factory.¹ The Hawk-i can display the tilt angle of the disrupter barrel. This is an additional piece of data often desired by EOD technicians to ensure that the disrupter shot is taken at the ideal angle to produce the optimal result. The tilt readout, when enabled, will be displayed underneath the range reading on the video screen. The angle is given in degrees. Features Crosshairs are projected on to operator’s video monitor and are automatically updated based on range to target; Provides crosshairs for dual barrels through one system3 Range to target is displayed on operator’s video monitor; Requires access to one analog video channel on a robotic platform Sealed enclosure for environment and shock resistance; 5-minute integration; No external monitor or hardware required at the robot’s base station Minimum Standoff Distance: 9 inches2; Maximum Standoff Distance: 48 inches2; No calibration required 2011 Edison Gold Award for Best New Product! Configuration and Delivery Details: • Standard mounting offset for Hawk-i™ from end of barrel is 0.75”; custom offset must be stated at time of order.3 • Hawk-i™ and Cobra Sight™ aiming systems are not ITAR-restricted. • Hawk-i™ versions are available for ANDROS F6A, tEODor, and TALON; contact us about Telemax support. • Hawk-i™ for F6A is compatible with ANDROS F5, F6A, F6B, HD-1, HD-1J. • Hawk-i™ is compatible with 12-gauge PAN™ disrupter; contact us about support for Benelli Super 90. The Hawk-i™ Video Aiming Device can also be utilized in conjunction with the Cobra Sight™ Laser Aiming Device. Notes: 1. Rev 2 systems and later 2. Measured from face of video module 3. Requires programming for given barrel configuration at factory System P/N(s) B00272-D00 Description Hawki for Teodor (PAL) Component P/N Component Description B00006-D00 CEU 1.2 5.5 x 3.25 x 1.75 B00004-D02 72-1031-24086 72-1031-26008 Video Module CEU Cable Video Cable 0.6 0.2 0.2 3.25 x 2.25 x 1.75 18 long 28 long 23-6416-0141 Mounting bracket 0.3 5.48 x 3.00 x 0.25 B00659-D02 Hardware Kit 0.1 6-32 3/16" Phillips screws (CEU to mounting plate) two (2) x 8-32 3/16” set screws (video module to barrel) 0.2 17 pages 8.5 x 11 2.8 17.5 x 12.5 x 4.5 B00272-D00_IOM B00274-D00 B00272-D01 B00273-D00 Hawki for Teodor (NTSC) Hawki for F6A Dimensions (inches) 5.6 B00006-D00 CEU 1.2 5.5 x 3.25 x 1.75 B00004-D03 72-1031-24086 72-1031-26008 23-6416-0141 Video Module CEU Cable Video Cable Mounting bracket 0.6 0.2 0.2 0.3 B00659-D02 Hardware Kit 0.1 3.25 x 2.25 x 1.75 18 long 28 long 5.48 x 3.00 x 0.25 6-32 3/16" Phillips screws (CEU to mounting plate) two (2) x 8-32 3/16” set screws (video module to barrel) 5/64" short-arm hex L-key 2" long (for set screws) B00272-D00_IOM Install/Operation Manual 0.2 17 pages 8.5 x 11 (same as B00272-D00) B00274-D00 Carry Case 2.8 17.5 x 12.5 x 4.5 B00006-D00 B00004-D00 72-1031-24085 72-1031-26008 Total Weight of System: CEU Video Module CEU Cable Video Cable B00276-A00 Mounting bracket B00659-D00 B00273-D00_IOM B00274-D00 +1 888.588.3448 [email protected] Install/Operation Manual Carry Case Total Weight of System: Weight (lbs) Hardware Kit Install/Operation Manual Carry Case Total Weight of System: 5.6 1.2 0.6 0.2 0.2 5.5 x 3.25 x 1.75 3.25 x 2.25 x 1.75 18 long 28 long 0.4 5.48 x 3.00 x 0.25 0.1 four (4) x 10-32 3/8" Phillips screws (CEU to mounting plate) two (2) x 10-24 1/2" Phillips screws (mounting plate to robot) two (2) x 8-32 1/2" Phillips screws (mounting plate to robot) 0.2 16 pages 8.5 x 11 2.8 17.5 x 12.5 x 4.5 5.7 System P/N(s) B00273-D01 Description Hawki for AFMSR Component P/N B00797-D00 B01039-D00 Hawki for Telemax +1 888.588.3448 [email protected] Weight (lbs) Dimensions (inches) B00006-D00 CEU 1.2 5.5 x 3.25 x 1.75 B00004-D00 Video Module 0.6 3.25 x 2.25 x 1.75 72-1031-24085 CEU Cable 0.2 18 long 72-1031-26008 Video Cable 0.2 28 long B00276-A00 Mounting bracket 0.4 5.48 x 3.00 x 0.25 B00659-D00 Hardware Kit 0.1 (4) x 10-32 3/8" Phillips screws (CEU to mounting plate) (2) x 10-24 1/2” Phillips screws (mounting plate to robot) (2) x 8-32 1/2” Phillips screws (mounting plate to robot) (2) x 8-32 3/16” set screws (video module to barrel) 5/64” short-arm hex L-key 2” long (for set screws) B00273-D00_IOM Install/Operation Manual 0.2 16 pages 8.5 x 11 (same as B00273-D00) B00274-D00 Carry Case 2.8 17.5 x 12.5 x 4.5 Total Weight of System: 5.7 CEU 1.2 B00006-D00 Hawki for TALON Component Description 5.5 x 3.25 x 1.75 B00004-D00 Video Module 0.6 3.25 x 2.25 x 1.75 72-1031-00101 CEU Cable 0.2 24 long 72-1031-26008 Video Cable 0.2 28 long B00276-A00 Mounting bracket 0.4 5.48 x 3.00 x 0.25 (see Note 1 below) B00659-D00 Hardware Kit 0.1 (4) x 10-32 3/8" Phillips screws (CEU to mounting plate) (2) x 10-24 1/2” Phillips screws (mounting plate to robot) (2) x 8-32 1/2” Phillips screws (mounting plate to robot) (2) x 8-32 3/16” set screws (video module to barrel) 5/64” short-arm hex L-key 2” long (for set screws) B00797-D00_IOM Install/Operation Manual 0.2 16 pages 8.5 x 11 B00274-D00 Carry Case 2.8 17.5 x 12.5 x 4.5 Total Weight of System: 5.7 B00006-D00 CEU 1.2 5.5 x 3.25 x 1.75 B00004-D02 Video Module 0.6 3.25 x 2.25 x 1.75 72-1031-24087 CEU Cable 0.2 18 long 72-1031-26008 Video Cable 0.2 28 long B00276-A00 Mounting bracket 0.4 5.48 x 3.00 x 0.25 B00659-D00 Hardware Kit 0.1 (4) x 10-32 3/8" Phillips screws (CEU to mounting plate) (2) x 10-24 1/2” Phillips screws (mounting plate to robot) (2) x 8-32 1/2” Phillips screws (mounting plate to robot) (2) x 8-32 3/16” set screws (video module to barrel) 5/64” short-arm hex L-key 2” long (for set screws) B01039-D00_IOM Install/Operation Manual 0.2 15 pages 8.5 x 11 B00274-D00 Carry Case 2.8 17.5 x 12.5 x 4.5 Total Weight of System: 5.7 Hawk-i™ Benefits: • The automatic crosshairs created by the Hawk-i™ video aiming system enables faster action, as less guesswork is involved in creating a target shot • Compatible with all 12-gauge PAN™ Disrupters • Significant improvement over venetian blind • Increased effectiveness is also guaranteed, as less time will need to be spent on aiming • When used in union with the Cobra Sight™ Laser Aiming Device, the effectiveness and accuracy of aiming at targets increases • The aiming system also decreases the chances of human error causing misfiring Cobra Sight™ Laser Aiming Device: The Cobra Sight™ Laser aiming device is an inventive new tactical device which utilizes true boresight technology. With this aiming device the end of the barrel remains uncovered, making zeroing in much faster. Two line lasers are utilized to project a true crosshair on your target for ranges greater than 7 inches without adjustment. With the Cobra Sight™ Laser, a more precise shot is guaranteed. To learn more about API Technologies Power Solutions, including the Hawk-i™ Video Aiming Device or Cobra Sight™ Laser Aiming Device, please contact +1 (888) 588-3448 or email [email protected] Rev: 09/18/14 +1 888.588.3448 [email protected] power.apitech.com www.apitech.com