Download Datasheet

AC Switched Power Distribution Unit
AC SMARTStart® - Advanced Remote Control and Monitoring with Intelligent Power Distribution
The AC SMARTStart® portfolio offers intelligent switched and sequenced Power Distribution Units (PDUs). It also provides
for local and remote control (Telnet, SNMP, or Web) to outlet groups. These units monitor input line voltage, total load
current, and line frequency. Each PDU has circuit protection and power-on current limits. Optional features include alarm
sensors; security sensors; limit switches; and remote emergency power off (EPO).
The AC SMARTStart® is an AC power distribution unit designed to control eight or sixteen AC loads and monitor vital
parameters. This product line comes in a variety of configurations, including total load capacity ranging from 16 to 30 Amps.
In addition, we offer output configurations that use screw clamp terminal blocks, in lieu of IEC or NEMA connectors, for
industrial applications.
All models have the ability to power-on or power-off any or all loads in any sequence over a wide range of time intervals. The
PDU automatically sequences each output. This significantly reduces the total in-rush current and limits the possibility of
equipment damage due to the combined turn-on transient of several loads. The sequence order and delay is user defined at
setup. A circuit breaker at the AC input provides overall protection. To prevent the circuit breaker from tripping during power
up, the PDU features a power-on current limit. The AC SMARTStart® AC Switched PDU is also capable of monitoring input
line voltage and total load current, as well as line frequency.
Operation/control is accomplished either manually, using controls on the front panel of the unit, or remotely, using a
computing device that utilizes EIA RS-232 and RS-485/422 communications such as a laptop computer, desktop computer,
or other personal electronic device.Two user programmable external contacts can be configured to alert the user of undervoltage, over-current, or over-temperature conditions using the dry contact closure. These contacts allow remote operation
and control from Web browser or Telnet interface.
Features & Benefits
• Remote operation and control capabilities
via Telnet or Web interface
• User ability to tailor the sequence and time delay
• Power control capability to groups of outlets
• Includes optional front or center mounting brackets
• Monitors input line voltage, total load current, line
frequency, and remote external temperature
(with optional temperature sensor)
• Log into PDU via IP address to see the status of
supply voltage, total current draw, outlet status
indicators, and more
• Two isolated contact inputs can be used with alarm
sensors, security sensors, limit switches, and/or
remote stop
• Daisey chain multiple units via RS232
• Emergency Power Off (EPO) configuration available
• Complies to FCC, CE, UL, and TÜV requirements
2U
1U
Technical Specifications
Part
Number
Input
Voltage
Max
Current
Input
Connection
Inputs
Outlet Connections
7608AD2012S
120 VAC / 47-63Hz
20A
IEC 20 Inlet
Single Input
8 x NEMA 5-20R
7608AL2012S
120 VAC / 47-63Hz
20A
NEMA 5-20P w/ 10’ cord
Single Input
8 x NEMA 5-20R
7608AE1624S
230 VAC / 47-63Hz
16A
IEC 20 Inlet
Single Input
8 x IEC C13
7608AD2012D
120 VAC / 47-63Hz
20A
IEC 20 Inlet
Dual Input*
8 x NEMA 5-20R
7608AE1624D
230 VAC / 47-63Hz
16A
IEC 20 Inlet
Dual Input*
8 x IEC C13
7608AD3012S
120 VAC / 47-63Hz
30A
NEMA L5-30P w/ 10’ cord
Single Input
8 x NEMA 5-15R
7608AE3024S
230 VAC / 47-63Hz
30A
IEC 309 30 Amp w/ 10’ cord
Single Input
8 x IEC C13
7608AD2012SN
120 VAC / 47-63Hz
20A
IEC 20 Inlet
Single Input
8 x NEMA 5-20R
7608AL2012SN
120 VAC / 47-63Hz
20A
NEMA 5-20P w/ 10’ cord
Single Input
8 x NEMA 5-20R
7608AE1624SN
230 VAC / 47-63Hz
16A
IEC 20 Inlet
Single Input
8 x IEC C13
7608AD2012DN
120 VAC / 47-63Hz
20A
IEC 20 Inlet
Dual Input*
8 x NEMA 5-20R
7608AE1624DN
230 VAC / 47-63Hz
16A
IEC 20 Inlet
Dual Input*
8 x IEC C13
7608AD3012SN
120 VAC / 47-63Hz
30A
NEMA L5-30P w/ 10’ cord
Single Input
8 x NEMA 5-15R
7608AE3024SN
230 VAC / 47-63Hz
30A
IEC 309 30 Amp w/ 10’ cord
Single Input
8 x IEC C13
7608AD2024DN-01 230 VAC / 47-63Hz
20A
NEMA L6-20P w/ 10’ cord
Dual Input*
4 x L6-15R and
4 x L6-20R
7608AD2024DN-02 230 VAC / 47-63Hz
20A
NEMA L6-20P w/ 10’ cord
Dual Input*
8 x 6-15R
(Form factor and all parameters can be modified to suit end application)
*Note each of our designs can be readily reconfigured to meet customer specific use cases
Communication
Serial
RS232
Serial,
Web,
& Telnet
* 1U Dual Input outlets hold 4 outlets per input
Part Number Configuration
7608
A
D
AC SMARTStart®
Voltage Design
A = AC
Input Style
D = NEMA
E = Global
L = NEMA 5-20P
fixed cord-set
20
Amperage
20 Amps
16 Amps
30 Amps
12
S
N
Inputs
S = 1 input, 1x8 Outlets
D = 2 inputs, 2x4 Outlets
Voltage
12 = 120 VAC NEMA
(100-127 VAC)
24 = 230 VAC Global
(200-250 VAC)
Communications
Options
N = Telnet
H
R
HR = High Reliability
Wide Temperature Operating
Range
E = Emergency Power Off
(EPO) option
Common Applications
• Financial Institutions
• Government & Military IT Infrastructures
• Data Centers
• Industrial IT Settings
• Internet Service Providers
• Medical Institutions
• Communication Stations
• Industrial Manufacturing & Test Equipment
• Solar & Wind Turbine Powered Infrastructures
• Transportation Logistics Centers
• Scientific Instrumentation
• Rail / Public Transportation / Highway Automation
& Traffic Managmenent Centers
• Wireless Messaging Platforms
• Industrial ATE Cabinets
Mechanical Dimensions
Front View:
Breaker Off/On
Start Power Button
Output Indicator LEDs
2x8-pin
‘Quick Disconnect’
RJ-11/EIA RS-485
Connection
PDA RS-232C
DCE
Computer
RS-232C
DTE
Remote &
Local Lights
See Ordering Information
for Outlet Configuration
Web/Telnet
RJ-45
AC Power Entry
1.745
(4.44)
Back View:
Ready Light
Communications
Switch
8.00
(20.32)
Top View:
17.188
(43.66)
Web/Telnet/SNMP Option:
• Global access to reboot your servers or network equipment
• Enhanced Web-based device set-up and control
management
• Auto Ping feature to test and optionally power cycle a
connected host
• Email alerts for designated recipients
• Optional sensors can be incorporated and included in alarm
email alerts with user defined messages
• SNMP MIB for standards-based monitoring and control of
the PDU and its associated operating features
• Enables lock out of outlets so that individuals do not plug in
unknown or unauthorized equipment
• Identify and set up parameters such as: ping for active
status, high voltage limit, low voltage limit, peak current
draw on PDU, temperature (if optional temperature sensor
is attached to the auxiliary connector).
Rev: 02/05/13
+1 888.588.3448
[email protected]
power.apitech.com
www.apitech.com