OV10642 HDR product brief lead free available in a lead-free package Best-In-Class Sensitivity and High Dynamic Range for Advanced Driver Assistance Systems OmniVision's OV10642 is a high performance 1.3-megapixel OmniHDR image sensor that delivers the highest sensitivity and the best high dynamic range (HDR) in its class. The sensor's benefits enable a host of advanced features, including: pedestrian detection, lanedeparture warning, traffic sign detection, lane keeping assist systems, and high beam assist, among others. The OV10642 image sensor utilizes OmniBSI™ technology to deliver industry leading sensitivity and extended dynamic range up to 120 dB in a simple, lowpower and cost-effective system. The 1/2.56-inch sensor supports an active array of 1280 x 1080 pixels and supports RAW image output up to 60 frames per second. The OV10642 fits into a compact 7.4 x 7.2 mm package. Find out more at www.ovt.com. OV10642 Applications ¬ Automotive - high beam assist - stereo sensing - traffic light recognition - rear view camera - lane departure warning/ lane keep assist - pedestrian detection - traffic sign recognition - autonomous driving Ordering Information ¬ OV10642-N79Y-1D-Z (color, lead-free, 78-pin aCSP™, rev 1D, in tray) Product Features ¬ support for image size: - 1280x1080 - VGA - QVGA, and any cropped size ¬ supported output formats: RAW ¬ high dynamic range ¬ high sensitivity ¬ horizontal and vertical sub-sampling Product Specifications ¬ serial camera control bus (SCCB) for register programming ¬ active array size: 1280 x 1080 ¬ lens size: 1/2.56" ¬ power supply: - analog: 3.14 ~ 3.47V - digital: 1.425 ~ 1.575V - DOVDD: 1.7 ~ 1.9V - AVDD: 1.7 ~ 1.9V ¬ lens chief ray angle: 9° ¬ high speed serial data transfer with MIPI CSI-2 ¬ safety features ¬ external frame synchronization capability ¬ low power consumption ¬ image sensor processor functions: - automatic exposure/gain control - lens correction - defective pixel cancelation - HDR combination and PWL mapping - automatic black level correction ¬ parallel 12-bit DVP output ¬ embedded temperature sensor ¬ one time programmable (OTP) memory ¬ power requirements: - active: TBD - standby: TBD ¬ temperature range: - operating: -40°C to +105°C sensor ambient temperature and -40°C to +125°C junction temperature ¬ output formats: - 20-bit combined RAW - 12-bit compressed combined RAW - separated 12-bit RAW - 2x12-bit compressed RAW - 16-bit log domain combined RAW - 3x12-bit uncompressed RAW Functional Block Diagram DPC, DNS, LENC, HDR, ToneMap stats engine gain control 4275 Burton Drive Santa Clara, CA 95054 USA Version 1.1, October, 2014 timing generator and system control logic RESETB PWDNB TM VSYNC HREF PCLK GPIO[2:0] BPREGD FSIN PLL 2 XVCLK PLL 1 Tel: + 1 408 567 3000 Fax: + 1 408 567 3001 www.ovt.com OTP temperature sensor DVP MIPI LVDS SCCB interface SIOD BLC, DigGain SIOC column ADC (12b) AEC/AGC FIFO row select image array output interface MIPI/LVDS DVP OV10642 image signal processor ¬ maximum image transfer rate: - full resolution: 60 fps ¬ scan mode: progressive ¬ output interfaces: 12-bit DVP, MIPI CSI-2/LVDS image sensor core ¬ input clock frequency: 6 ~ 27 MHz OmniVision reserves the right to make changes to their products or to discontinue any product or service without further notice. OmniVision is a registered trademark of OmniVision Technologies, Inc. The OmniVision logo and OmniBSI are trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners. ¬ shutter: rolling shutter ¬ sensitivity: TBD ¬ max S/N ratio: TBD ¬ dynamic range: 120 dB ¬ pixel size: 4.2 µm x 4.2 µm ¬ image area: 5410 µm x 4570 µm ¬ package dimensions: - aCSP: 7430 µm x 7190 µm