Hybrid Aluminum Electrolytic Capacitors NSPE-H Series • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING • EXTENDED LOAD LIFE AT HIGH TEMPERATURE (2000 ~ 10,000 HOURS @ +105°C) • HIGH VOLTAGE RATINGS (16 ~ 125VDC) Anti-Vibration, Wide Terminations • LOW ESR AND HIGH RIPPLE CURRENT RATINGS (8mm & 10mm Diameter Parts) • 6.3x4.8mm ~ 10x12.8mm CASE SIZES • REFLOW SOLDERING RATED UP TO +260°C • MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage Range Rated Capacitance Range Operating Temp. Range Capacitance Tolerance Max. Leakage Current After 2 Minutes @ 20°C 16 ~ 125Vdc 6.8 ~ 560μF -55 ~ +105°C ±20% (M) 16 ~ 63Vdc 80 ~ 125Vdc W.V. (Vdc) S.V. (Vdc) Working and Surge Voltage Ratings 16 20 Tan δ @ 120Hz/20°C Z -55°C/Z +20°C Z +105°C/Z +20°C W.V. (Vdc) 16 6.3x4.8mm φ6.3mm 3000 hrs. Case Dia. φ8 & 10mm 7000 hrs. Capacitance Change Tan δ and ESR Leakage Current Impedance Ratio Load Life Test @ 105°C and Rated Voltage Less than 0.01CV or 3μA whichever is greater Less than 0.05CV or 100μA whichever is greater 25 35 40 50 63 80 100 32 44 50 63 79 100 125 0.16 1 ~ 2.5 0.6 ~ 1.0 25 35 40 50 63 80 100 2000 hrs. 5000 hrs. 10000 hrs. Within ±30% of initial measured value Less than 200% of specified max. value Less than specified max. value 125 157 125 - STANDARD PRODUCTS AND CASE SIZES Dφ x L (mm) PART NUMBER NSPE-H820M16V6.3X6.3NBF Cap. Working Case Size Max. Tan δ Max. ESR (mΩ) Max. Ripple Current (mA rms) Load Life (μF) Voltage (D X L) mm 120Hz/20°C AT 100KHz/20°C AT 100KHz/105°C Hours (+105°C) 82 6.3X6.3 0.16 55 1330 3000 NSPE-H121M16V6.3X8NBF 120 NSPE-H271M16V8X10.8NBF 270 6.3X8 0.16 40 1500 3000 8X10.8 0.16 26 2000 7000 NSPE-H471M16V10X10.8NBF NSPE-H561M16V10X12.8NBF 470 10X10.8 0.16 21 2600 7000 560 10X12.8 0.16 15 3000 7000 NSPE-H270M25V6.3X4.8LBF 27 6.3X4.8 0.16 95 800 2000 NSPE-H470M25V6.3X6.3NBF 47 6.3X6.3 0.16 60 1270 5000 NSPE-H680M25V6.3X8NBF 68 NSPE-H151M25V8X10.8NBF 150 NSPE-H271M25V10X10.8NBF NSPE-H331M25V10X12.8NBF 16 6.3X8 0.16 45 1400 5000 8X10.8 0.16 27 1900 10000 270 10X10.8 0.16 22 2530 10000 330 10X12.8 0.16 16 2900 10000 25 NSPE-H120M35V6.3X4.8LBF 12 6.3X4.8 0.16 150 640 2000 NSPE-H270M35V6.3X6.3NBF 27 6.3X6.3 0.16 100 1080 5000 NSPE-H470M35V6.3X8NBF 47 NSPE-H101M35V8X10.8NBF 100 6.3X8 0.16 60 1300 5000 8X10.8 0.16 30 1800 10000 NSPE-H151M35V10X10.8NBF NSPE-H221M35V10X12.8NBF 150 10X10.8 0.16 23 2470 10000 220 10X12.8 0.16 17 2830 10000 NSPE-H180M40V6.3X6.3NBF 18 6.3X6.3 0.16 110 1030 5000 NSPE-H270M40V6.3X8NBF 27 6.3X8 0.16 70 1250 5000 35 NSPE-H560M40V8X10.8NBF 56 8X10.8 0.16 32 1750 10000 NSPE-H101M40V10X10.8NBF 100 40 10X10.8 0.16 24 2400 10000 NSPE-H121M40V10X12.8NBF 120 10X12.8 0.16 18 2750 10000 NSPE-H5R6M50V6.3X6.3NBF 5.6 6.3X6.3 0.16 120 980 5000 NSPE-H100M50V6.3X6.3NBF 10 6.3X6.3 0.16 120 980 5000 50 For Automotive Applications See Part Numbering System NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Hybrid Aluminum Electrolytic Capacitors NSPE-H Series STANDARD PRODUCTS AND CASE SIZES Dφ x L (mm) PART NUMBER NSPE-H100M50V6.3X8NBF Cap. Working Case Size Max. Tan δ Max. ESR (mΩ) Max. Ripple Current (mA rms) Load Life (μF) Voltage (D X L) mm 120Hz/20°C AT 100KHz/20°C AT 100KHz/105°C Hours (+105°C) 10 6.3X8 0.16 80 1200 5000 NSPE-H150M50V6.3X8NBF 15 NSPE-H330M50V8X10.8NBF 33 6.3X8 0.16 80 1200 5000 8X10.8 0.16 35 1670 10000 NSPE-H560M50V10X10.8NBF NSPE-H820M50V10X12.8NBF 56 10X10.8 0.16 25 2320 10000 82 10X12.8 0.16 19 2650 10000 NSPE-H2R7M63V6.3X6.3NBF 2.7 6.3X6.3 0.16 150 960 5000 NSPE-H3R9M63V6.3X8NBF 3.9 6.3X8 0.16 100 1060 5000 NSPE-H6R8M63V6.3X6.3NBF 6.8 6.3X6.3 0.16 150 960 5000 NSPE-H100M63V6.3X8NBF 10 6.3X8 0.16 100 1060 5000 NSPE-H220M63V8X10.8NBF 22 8X10.8 0.16 40 1560 10000 NSPE-H330M63V8X10.8NBF 33 8X10.8 0.16 40 1560 10000 NSPE-H330M63V10X10.8NBF 33 10X10.8 0.16 30 2100 10000 NSPE-H470M63V10X10.8NBF 47 10X10.8 0.16 30 2100 10000 NSPE-H560M63V10X12.8NBF 56 10X12.8 0.16 22 2400 10000 NSPE-H120M80V10X10.8LBF 12 10X10.8 0.16 70 1600 10000 NSPE-H150M80V10X10.8LBF 15 10X10.8 0.16 70 1600 10000 NSPE-H180M80V10X12.8LBF 18 10X12.8 0.16 50 1830 10000 NSPE-H100M100V10X10.8LBF 10 NSPE-H120M100V10X10.8LBF 12 NSPE-H150M100V10X12.8LBF 15 NSPE-H100M125V10X10.8LBF 10 50 63 80 10X10.8 0.16 80 1450 10000 100 10X10.8 0.16 80 1450 10000 10X12.8 0.16 60 1660 10000 125 10X10.8 0.16 90 1250 10000 RIPPLE CURRENT FREQUENCY CORRECTION FACTORS Cap. μF C < 4.7 5.6 ~ 33 > 33 100Hz 0.03 0.05 0.10 1KHz 0.30 0.32 0.35 10KHz 0.65 0.67 0.70 100KHz 1.00 1.00 1.00 PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Hybrid Aluminum Electrolytic Capacitors NSPE-H Series PART NUMBER SYSTEM NSPE-H 220 M 63V 8x10.8 N B W Y F Series RoHS Compliant Optional Wide Terminations B = Sn-Bi Finish, 13" Reel, LB=Sn-Bi Finish, 15" Reel S = 100% Sn Finish, 15" Reel, LS = 100% Sn Finish, 15" Reel Reflow Temp. Code (L=+250°C, N=+260°C) Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in μF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10μF Optional: Suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site Code B BW BY BWY LB LBW LBY LBWY S SW SY SWY LS LSW LSY LSWY Plating Sn-Bi Sn-Bi Sn-Bi Sn-Bi Sn-Bi Sn-Bi Sn-Bi Sn-Bi 100% Sn 100% Sn 100% Sn 100% Sn 100% Sn 100% Sn 100% Sn 100% Sn A, B ±0.2 6.6 6.6 6.6 8.3 10.3 10.3 W 0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 0.7 ~ 1.0 1.0 ~ 1.4 1.0 ~ 1.4 Termination Type Standard Wide Terminations Standard Wide Terminations Standard Wide Terminations Standard Wide Terminations Standard Wide Terminations Standard Wide Terminations Standard Wide Terminations Standard Wide Terminations Automotive No No Yes Yes No No Yes Yes No No Yes Yes No No Yes Yes Reel Size 13" Reel 13" Reel 13" Reel 13" Reel 15" Reel 15" Reel 15" Reel 15" Reel 13" Reel 13" Reel 13" Reel 13" Reel 15" Reel 15" Reel 15" Reel 15" Reel DIMENSIONS (mm) Case Size 6.3X4.8 6.3X6.3 6.3X8 8X10.8 10X10.8 10X12.8 Dφ ±0.5 6.3 6.3 6.3 8.0 10 10 L max. 4.8 6.3 8.0 10.8 10.8 12.8 + Dφ I I ±0.2 2.5 2.5 2.5 2.9 3.2 3.2 I P ±0.2 2.2 2.2 2.2 3.2 4.6 4.6 - W 0.3mm max. Part Marking Series Code Lot Code H__ 68 25V Capacitance Value A L Voltage P B NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 3 Hybrid Aluminum Electrolytic Capacitors NSPE-H Series STANDARD TERMINATION LAND PATTERN DIM. (mm) Case Dia. 6.3 8 10 A 3.6 4.1 4.4 B 1.8 2.1 2.5 + P 1.8 2.8 4.3 B A P A WIDE TERMINATION LAND PATTERN DIM. (mm) WIDE TERMINATION DIM. (mm) Case Size 8x10.8 10x10.8 10x12.8 Case Size Dφ ±0.5 L max. A, B C ±0.2 P ±0.2 W R T 8 x 10.8WT 8.0 11.0 8.3 ± 0.2 9.0 3.2 0.7 ~ 1.0 (0.7) (1.3) 10 x 10.8WT 10.0 11.0 10.3 ± 0.2 11.0 4.6 1.0 ~ 1.4 (0.7) (1.3) 10 x 12.8WT 10.0 13.5 10.3 ± 0.2 11.0 4.6 1.0 ~ 1.4 (0.7) (1.3) C a 2.5 3.8 3.8 Dφ W c 4.7 4.7 4.7 a WT Anti-Vibration Skirt A b 4.5 4.8 4.8 c L T R R b P Termination deflection: WT = 0.15mm max. from bottom of support terminals B Temperature - Deg. C RECOMMENDED REFLOW SOLDERING PROFILE* Peak Temperature (see table) 260 230 200 Time Above 230°C (see table) 150 100 Time Above 200°C (see table) Preheat - 120 seconds max. (150°C ~ 190°C) 50 Time (Seconds) Review & Compare Reflow Soldering Heat Limits V-chip SMT Aluminum Electrolytic Capacitors www.niccomp.com/RSL 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Hybrid Aluminum Electrolytic Capacitors NSPE-H Series PEAK TEMPERATURE AND DURATION (16V ~ 63V) Diameter 6.3X4.8mm 6.3 ~ 10mm Time above 200°C 60 sec. max. 100 sec. max. Time above 217°C 50 sec. max. 80 sec. max. Time above 230°C 30 sec. max 40 sec. max. Peak Temperature 250°C/5 sec. 260°C/5 sec. PEAK TEMPERATURE AND DURATION (80V ~ 125V) Time above Time above Time above Peak 200°C 217°C 230°C Temperature 10mm 100 sec. max. 80 sec. max. 40 sec. max. 250°C/5 sec. *Two reflow passes are permissible with a cool down to room temperature required between the first and second pass. Diameter TAPING SPECIFICATIONS (mm) 1. Both Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets. 2. Leader tape: Approximately 20cm of cover tape at leader. 3. Connection: Maximum 3 connections (slices) per reel. 4 + 0.1 P ±0.1 12.0 12.0 12.0 16.0 16.0 16.0 T ±0.2 5.1 6.5 8.2 11.0 11.0 13.3 t max. 0.6 0.6 0.6 0.6 0.6 0.6 6.3X4.8 6.3X6.3 6.3X8 8X10.8 10X10.8 10X12.8 W ±1.0 18 18 18 26 26 26 + A P Feeding T 2mm ± 0.5mm REEL DIMENSIONS (mm) Case Size - t B D ±0.1 7.5 7.5 7.5 11.5 11.5 11.5 D C ±0.3 16.0 16.0 16.0 24.0 24.0 24.0 Qty per Reel 13" (330mm) 15" (380mm) 1000 800 1000 500 900 300 500 300 500 300 400 φ13mm ± 0.5mm φ21mm ± 0.8mm φ330mm ± 2.0mm or φ380mm ± 2.0mm NIC COMPONENTS CORP. www.niccomp.com φ50mm min. 6.3X4.8 6.3X6.3 6.3X8 8X10.8 10X10.8 10X12.8 B ±0.5 7.0 7.0 7.0 8.7 10.7 10.7 1.75 ± C Case Size A ±0.5 7.0 7.0 7.0 8.7 10.7 10.7 1.75 + 0.15 1.5∅ +0.1/1.5φ+0.1/-0 www.lowESR.com W www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE 3mm www.SMTmagnetics.com 5