OV9728 720p HD product brief lead free available in a lead-free package Low-Power and Cost-Efficient 720p HD CameraChip™ Sensor for Portable Devices and Smart TVs The OV9728 is a low-power, cost-efficient CameraChip sensor designed for secondary camera applications in notebooks, tablets, smartphones and smart TVs. The high-performance OV9278 delivers exceptional 720p high-definition (HD) video, which exceeds the criteria of premium video specifications for Microsoft® Lync™ and Skype®. The OV9728 provides full-frame, sub-sampled, windowed or scaled 8- and 10-bit images. All required image processing functions, including exposure control and defective pixel cancelling, are programmable through the serial camera control bus (SCCB) interface. It features a one-lane high-speed MIPI interface and fits into a compact 6 x 6 x 3 mm module. The OV9728 utilizes a 1.75-micron OmniBSI+™ pixel architecture to deliver best-in-class low-light sensitivity, a 60 percent improvement in full-well capacity (FWC), a 4 dB improvement in dynamic range, and a significantly enhanced signal-to-noise ratio (SNR). A 1/6.5-inch sensor, the OV9728 can record 720p HD video at 30 frames per second (fps) or high-quality cropped VGA video at 60 fps. Find out more at www.ovt.com. OV9728 Applications ¬ Ultrabooks/Notebooks ¬ Televisions ¬ Smartphones ¬ Toys ¬ Gaming ¬ PC Multimedia Ordering Information ¬ Tablets ¬ OV09728-A30A (color, lead-free, 30-pin CSP3) Product Features ¬ MIPI and D-PHY specification (contains one clock lane and one data lane) with a maximum of 600 Mbps data transfer rate ¬ supports free-running clock and gated clock Product Specifications ¬ low operating voltage and low power consumption for embedded portable applications ¬ supports down sample mode and VarioPixel® ¬ auto black level calibration ¬ supports global analog gain ¬ high sensitivity and low dark current for low-light conditions ¬ defect correction capability ¬ active array size: 1296 x 808 ¬ input clock frequency: 6 ~ 27 MHz ¬ power supply: - core: 1.5V - analog: 2.8V (typical) - I/O: 1.8V (typical) ¬ max S/N ratio: 38 dB ¬ dynamic range: 74 dB @ 8x gain ¬ maximum image transfer rate: 30 fps ¬ power requirements: - IDD-A: 18 mA - IDD-IO: 28 mA - XSHUTDOWN: 5 µA ¬ sensitivity: 1000 mV/lux-sec ¬ scan mode: progressive ¬ temperature range: - operating: -30°C to +70°C junction temperature - stable image: 0°C to +50°C junction temperature ¬ maximum exposure interval: 824 x tROW ¬ pixel size: 1.75 µm x 1.75 µm ¬ output formats: 10-bit RAW RGB data ¬ lens size: 1/6.5" ¬ dark current: 12 e-/s @ 50°C junction temperature ¬ image area: 2296 µm x 1428 µm ¬ package dimensions: 3810 µm x 3260 µm ¬ lens chief ray angle: 31.6° non-linear Functional Block Diagram OV9728 ADC AMP ISP image array black level calibration row select column sample/hold output interface MIPI image signal processor FIFO image sensor array MCP/N MDP/N gain control control register bank 4275 Burton Drive Santa Clara, CA 95054 USA Version 1.2, October, 2014 Tel: + 1 408 567 3000 Fax: + 1 408 567 3001 www.ovt.com LED_PWM FSIN/GPIO0 timing generator STROBE/GPIO1 XSHUTDOWN system control logic PWDNB regulator TM PLL EXT_CLK (6~27 MHz) SIOD SIOC SID SCCB slave interface OmniVision reserves the right to make changes to their products or to discontinue any product or service without further notice. OmniVision and VarioPixel are registered trademarks of OmniVision Technologies, Inc. The OmniVision logo and OmniBSI are trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners.