OV6211 400x400 product brief lead free available in a lead-free package Low-Power, Ultra-Compact Global Shutter Sensor for Computer Vision Applications The OV6211 is an ultra-compact, low-power global shutter sensor that enables computer vision for a broad range of applications, including notebooks, ultrabooks, tablets, smartphones, gaming devices and security systems. The OV6211 global shutter sensor captures 400 x 400 square resolution video at 120 frames per second (fps). Utilizing a 3-micron OmniPixel3-GS™ global shutter pixel, the sensor enables a host of features, including gesture recognition, eye tracking, biometrics, as well as depth and motion detection. The sensor's ultra-compact form factor make it an ideal machine and computer vision solution for devices with narrow bezels such as notebooks, tablets and smartphones. The OV6211 features two low-power modes: light sensing mode and ultra-low power mode. In light sensing mode, the OV6211 wakes up from "sleep mode" only when a change in light has been detected. In ultra-low power mode, the sensor reduces resolution and frame rates to conserve additional power. These two features allow the sensor to be used in "always on" mode while consuming very little power. Find out more at www.ovt.com. OV6211 Applications ¬ Cellular Phones ¬ Tablets ¬ Digital Video Camcorders (DVC) ¬ Security/Surveillance ¬ PC Multimedia ¬ Gaming Ordering Information ¬ OV06211-A29A (B&W, lead-free, 29-pin CSP3) Product Features ¬ 3 µm global shutter pixel ¬ programmable SCCB device ID Product Specifications ¬ automatic black level calibration (ABLC) ¬ one-lane MIPI serial output interface ¬ programmable controls for frame rate, ¬ embedded 128 bits of one-time mirror and flip, cropping and windowing programmable (OTP) memory for part identification, etc. ¬ supports output formats: 8/10-bit RAW ¬ two on-chip phase lock loop (PLL) ¬ supports images sizes: 400x400, 200x200, 100x100 ¬ programmable I/O drive capability ¬ fast mode switching ¬ built-in 1.5V regulator for core ¬ supports horizontal and vertical 2:1 and 4:1 monochrome subsampling ¬ PWM ¬ built-in strobe control ¬ supports 2x2 monochrome binning ¬ ultra low power mode for ambient light sensor ¬ standard serial SCCB interface ¬ active array size: 400 x 400 ¬ scan mode: progressive ¬ power supply: - analog: 2.6 ~ 3.0V - core: 1.5 VDC ±5% - I/O: 1.7 ~ 3.0V ¬ maximum image transfer rate: - 400x400: 120 fps - 200x200: 220 fps - 100x100: 380 fps ¬ power requirements: - active: 85 mW @ 120 fps - standby: 15 µA for AVDD, 40/700 µA for DOVDD with/without input clock - XSHUTDOWN: 5 µA for AVDD, 5 µA for DOVDD ¬ sensitivity: 2800 mV/lux-sec @ 530 nm 7190 mV/(µW.cm-2.sec) @ 850 nm ¬ temperature range: - operating: -30°C to +70°C junction temperature - stable image: 0°C to +50°C junction temperature ¬ maximum exposure interval: 434 x tROW ¬ output formats: 8/10-bit RAW RGB data ¬ lens size: 1/10.5" ¬ lens chief ray angle: 29.9° non-linear ¬ input clock frequency: 6 ~ 27 MHz Functional Block Diagram OV6211 output interface FIFO 10-bit ADC AMP black level calibration row select image array MIPI image sensor array column sample/hold MCP/N MDP/N gain control 4275 Burton Drive Santa Clara, CA 95054 USA Version 1.2, October, 2014 Tel: + 1 408 567 3000 Fax: + 1 408 567 3001 www.ovt.com PWM ULPM STROBE timing generator FSIN/VSYNC system control logic TM PLL XVCLK (~32 KHz, 6-27 MHz) SIOD SIOC SCCB slave interface regulator XSHUTDOWN control register bank OmniVision reserves the right to make changes to their products or to discontinue any product or service without further notice. OmniVision, the OmniVision logo and OmniPixel are registered trademarks of OmniVision Technologies, Inc. OmniPixel3-HS is a trademark of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners. ¬ max S/N ratio: 37.5 dB ¬ dynamic range: 66.5 dB @ 8x gain ¬ pixel size: 3 µm x 3 µm ¬ dark current: 2000 e-/s @ 50°C junction temperature ¬ image area: 1248 µm x 1248 µm ¬ package dimensions: 3175 µm x 3175 µm